The handle is only needed so we can open the resource, once we have
it we can close the handle. We then cache the shared resource for
future reuse if possible.
DXGI doesn't take into account the SDRWhiteLevel that has already been
applied to the monitor when it converts to HDR10 which results in clipping.
This change set implements a HLSL shader to reverse this while at the same
time converting to HDR10.
This is still not perfect but far better then doing nothing.
There is no performance penalty to using ARGB10 as it's still a 32-bit copy per
pixel and the nvidia driver internally handles any conversions required to make
this work for both SDR and HDR.
@quantum has observed nvfbc under rare circumstances fail to initialize,
this adds a retry to the init with a short delay to hopefully recover
from this situation.
This is an experimental & incomplete feature for those using
supersampling. Anything > 1200p will be downsampled by 50% before
copying out of the GPU to save on memory bandwidth.
Unfinished! Has issues with damage tracking and currently can not
be configured. Only dx11 has been tested at this point, everything
else will likely have problems/crash.
The nsleep() call lets d3d12 sleep for a more precise amount of
time while maintaining the current millisecond-scale sleep
interface in the configuration file.
To avoid client showing "Using : NVFBC (NVidia Frame Buffer Capt".
This happens because the string is truncated to 31 characters to fit
in the char capture[32]; member of KVMFRRecord_VMInfo.
This will cache up to 10 handles, in practice I have never seen DXGI
return anything but the same resource each time but we allow for more
anyway should MS change something in the future.
Should the cache get over filled it is disabled entirely and we revert
to the original behaviour.
The buffer input sizes to the `IDXGIOutputDuplication` methods are measured
in bytes. This dramatically increases the number of dirty/move rects that
can be handled.
This new feature while helps on some systems, others using freesync or
higher refresh rates where the capture can't keep up will limit to
fractions of the refresh rate. Better to disable and allow users to
opt-in.
This change reduces the host GPU and CPU load by a large margin
improving guest system performance along with removing latency spikes
when moving the mouse. This is default enabled but can be disabled with
the new option `dxgi:dwmFlush=no` as it limits the capture rate to the
refresh rate of the guests output which may not be desireable.
This change allows the host to provide information to the client about
how the VM is configured, information such as the UUID, CPU
configuration and capture method both for informational display in the
client as well as debugging in the client's logs.
The format of the records allows this to be extended later with new
record types without needing to bump the KVMFR version.
If the wait times out, we used to simply restart the loop, which causes
it to check this->stop and exit if set to true. However, nvfbc_stop
already calls lgSignalEvent, which would wake up the pointer thread to
perform the check, so there is no need to set a timeout on the wait.
This commit adds damage tracking to the DXGI textures, and only copies the
damaged areas to the textures with ID3D11DeviceContext::CopySubresourceRegion.
The sleep logic in waitFrame makes it difficult for this to reduce the
latency, but removing it shows significant improvements (6-7 ms to ~3 ms)
when a tiny portion of the screen is damaged, while showing no difference on
full screen damage.
This implementation uses a line sweep algorithm to copy the precisely the
intersection of all accumulated damage rectangles, ensuring that every
pixel is copied exactly once, and no pixel is ever copied multiple times.
Furthermore, once a row has been swept, we update the framebuffer write
pointer immediately.
Certain drivers do not support pitches that are not multiples of 128 bytes,
and instead just does some kind of rounding internally. On DXGI, this is not
a problem because the API rounds pixel pitch, but NvFBC does not. This causes
certain resolutions to simply not work with dmabuf, most notably 3440x1440,
which is 1440p ultrawide.
Since we are copying pixels with the CPU anyways, we might as well round the
pitch up to 128 bytes (32 pixels).
This commit adds a new host configuration option, nvfbc:diffRes, which
specifies the dimensions of every block in the diff map. This defaults to
128, meaning the default 128x128 block size.
Since block sizes other than 128x128 is not guaranteed to be supported by
NvFBC, the function NvFBCGetDiffMapBlockSize was introduced to query the
support and output the actual block size used.
For adjacent changed regions, we actually use the bounding box for the
entire polygon. This may result in more area being damaged than strictly
necessary, but is nevertheless desirable since it reduces the number of
rectangles.
Before we try and perhaps fail to init DXGI, we should print out what
the device is so that when there is an error report we can immediately
see if the user has the QXL device attached still.
While it's correct for DXGI to use a asyncronous waitFrame model, other
capture interfaces such as NvFBC it is not correct. This change allows
the capture interface to specify which is more correct for it and moves
the waitFrame/post into the main thread if async is not desired.
Before, we only break out of the current row when a change is detected,
and all subsequent rows are still scanned. Now we break out of the entire
loop. This should make change detection ever so slightly faster.
Testing shows that `D3DKMTSetProcessSchedulingPriorityClass` has a
positive performance impact for NvFBC as well as DXGI, as such always
try to boost the priority for the windows host.
This so called "enhanced" event logic is completely flawed and can never
work correctly, better to strip it out and put our faith in windows to
handle the events for us.
And yes, I am fully aware I wrote the utter trash in the first place :)
This change adds an average function to time how long it takes the GPU
to copy and map the texture, and then uses this average to sleep for 80%
of this average lowering CPU usage and potentially decreasing lock
contention.
It has been detemined that a failure to init NvFBC causes a 20-30%
performance penalty on non NvFBC supported hardware (GeForce) when using
DXGI, as such reverse the order and default to using DXGI as our first
option.
If NvFBC is still desired, pr #500 added the option `app:capture` which
can be used to force NvFBC.
Since we now let the mouse hook linger until the process is killed, the
cursor event that the hook signals may now be null, as the capture could
have stopped. If the hook fires during this time, a crash occurs.
This commit introduces a new option, app:capture, which can be set to
either DXGI or NvFBC to force the host application to use that backend.
This is very useful for testing DXGI on Quadro cards, which would default
to running with NvFBC.
The mouse hook code is very fragile, and we would like to avoid unhooking
and re-hooking as much as possible.
After this commit, this is done only once, and the hook and 1x1 window is
only destroyed upon exit. This, of course, comes with the downside of
the slight performance penalty if the guest machine is used directly while
the host is running and the client is not running.
Moving NvFBCToSysSetup to nvfbc_init means that when the pointer thread
fails to be created, NvFBCToSysRelease needs to be called.
To resolve such cleanup issues in the future, we instead call nvfbc_deinit,
which should cleanup everything that needs to be cleaned up. fails.
When NvFBCToSysCapture reports recreation is required, we return
CAPTURE_RESULT_REINIT, which eventually calls nvfbc_deinit and then
nvfbc_init.
However, the NvFBC object is actually created in nvfbc_create, which
means the NvFBC object is never actually recreated. The result is an
endless cycle of NvFBC asking for recreation. This commonly manifests
as the client waiting endlessly for the host when the guest machine
reboots.
In this commit, the NvFBC object creation is moved into nvfbc_init,
and when recreation is required, it will actually be recreated.
mouseHook_install and dwmForceComposition both create threads, but these
are only freed in nvfbc_deinit which is not called if nvfbc_init fails.
These should be freed if the pointer thread fails to be created, as
nothing else could be cleaning it up.
This is because we keep track of the top-left corner of the cursor, not
the location of the hotspot. When the cursor shape changes, the hotspot
location may also change. When it does, the position of the top-left
corner changes and requires an update.
In the case that we do not have the current cursor position, which
happens on startup, we do not generate this update.
NvFBC is unable to capture certain applications that bypasses the DWM
compositor, for example, Firefox playing video in full screen. This
has been a known issue for a long time with Nvidia's ShadowPlay, see:
* https://www.nvidia.com/en-us/geforce/forums/geforce-experience/14/233709/
* https://crbug.com/609857
Nvidia won't fix this, but there are workarounds. For example, we
create a transparent 1x1 layered window, which forces desktop composition
to be enabled.
Note that SetLayeredWindowAttributes also supports alpha-based transparency,
but setting transparency to 0 will cause DWM to skip composition. We could
use a transparency of 1, but this ruins the image by the slightest bit,
which is unacceptable. Therefore, we must use chroma key-based
transparency, which tricks DWM into compositing despite being fully
transparent.
This makes it a compile-time error to call a function that semantically
takes no parameters with a nonzero number of arguments.
Previously, such code would still compile, but risk blowing up the stack
if a compiler chose to use something other than caller-cleanup calling
conventions.
This commit bumps the KVMFR protocol version as it adds additional
hotspot x & y fields to the KVMFRCursor struct. This corrects the issue
of invalid alignment of the local mouse when the shape has an offset
such as the 'I' beam.
