wz camera mods... make your camera better.
Go to file
virmaior a91b20a959
make clearer why base page is not populating / add check recording (#624)
* add ability to check if last minute recorded to SD

* improve composition of web root

* add multicam to list of options in s10httpd

* make cgi-bin and sh functional / improve logic
2023-09-24 19:36:42 -07:00
documentation update documentation 2022-06-13 21:10:28 -07:00
SD_ROOT make clearer why base page is not populating / add check recording (#624) 2023-09-24 19:36:42 -07:00
src/kernel New init system (#216) 2022-08-07 18:46:00 -07:00
v2_install Update compile_image.sh (#610) 2023-09-13 22:31:33 -07:00
.gitignore add support for car fw and enable drivers 2022-07-13 18:02:17 -07:00
file.chk S17motor: add startup motor position. Thanks @Grntrenchman 2023-09-20 16:19:10 -07:00
generate_checksum.sh add support for car fw and enable drivers 2022-07-13 18:02:17 -07:00
README.md README formatting 2023-08-25 02:21:43 -07:00

wz_mini_hacks

Ingenic based T20/T31 based devices only!

Run whatever firmware you want on your camera and have root access to the device. Use CAUTION if you are unsure of what you are doing. Permanent damage is possible to your device. No support whatsoever is offered with this release.

Do not contact any manufacturer for information or support, they will not be able to assist or advise you!

Using this project can potentially expose your device to the open internet depending on the configuration of your network. You alone are responsible for the configuration and security of your network, make sure you are aware of the risks involved before using.

Features

  • No hardware modifications needed to the device!
  • Easy uninstall, just remove files from micro-sd card, or don't use a micro-sd card at all!
  • Compatability is not guaranteed with really old firmware versions!
  • Update to the latest stable or beta firmware, this mod should still work! (most features, see the wiki) Firmware-Support
  • Block remote or app initiated firmware updates
  • DNS Spoofing or Telnet mod are not required prior to installation
  • RTSP Streaming Support:
    • v4l2rtspserver
    • go2rtc
  • RTMP Streaming - Stream live video from the camera to your favorite service, youtube, twitch, or facebook live.
  • Networking:
    • Wireguard, IPv6, CIFS/Samba and iptables support enabled
    • Tether your camera directly to android phones using USB via RNDIS support
    • USB gadget support, connect the camera directly to a supported router to get an internet connection, no USB Ethernet Adapter required, using USB CDC_NCM.
  • Supports the following USB Ethernet adapters:
    • ASIX AX88xxx Based USB 2.0 Ethernet Adapters
    • ASIX AX88179/178A USB 3.0/2.0 to Gigabit Ethernet
    • Realtek RTL8152 Based USB 2.0 Ethernet Adapters
    • CDC-Ether Based Adapters
  • USB Mass storage enabled, mount USB SSD/HDD/flash drives
  • Play audio to the camera speaker from files or streaming audio!
  • WebCam Mode - Use your camera as a spare UVC USB Web Camera on your PC or AndroidTV!
  • Custom boot script support included

How you can help!

  • Vertical Tilt on the PANv2 doesn't work properly. Only does this on the modified kernel. Need investigation why this happens.

Why?

  • Most things in life relate to cats somehow. I started this project to track the local feral cat population in my neighborhood using cameras.

Prerequisites

  • Person
  • Cat ( for emotional support during setup )
  • Computer
  • 256MB or larger Micro-SD Card is required!
  • Higher class Micro-SD cards will ensure better performance

Setup / Configuration / Installation

Visit the Installation & Setup section of the Wiki for details!

What Works / What Doesn't Work

  • Everything works except:

    1. PAN v2:
      • Tilt (Vertical) only works at motor speed 9

HELP! SOMETHING DOESN'T DOESN'T WORK

  • If you need assistance, or have general questions, feel free to visit the Discussions area! There are folks always willing to help out.

Latest Updates

* Visit the Changelog at the Wiki for the latest update information!

BYO

Build your own!!

https://github.com/mnakada/atomcam_tools has a great repo with docker images which include kernel sources, config, and a whole bunch of other stuff. Check it out.

WARNING

AS WITH ANY UNSUPPORTED SYSTEM MODIFICATIONS, USING THIS MAY LEAD TO A DEVICE BRICK
IF YOU DON'T KNOW WHAT YOU ARE DOING ( HAVEN'T BRICKED MY DEVICE YET! ) PLEASE
BE AWARE THAT NO ONE ON THE INTERNET IS RESPONSIBLE FOR ANY DAMAGE TO YOUR
UNIT. ANY PROBLEMS WILL BE CONSIDERED USER ERROR OR ACTS OF WHATEVER GOD YOU BELIEVE IN.
USE AT YOUR OWN RISK. NO WARRANTY OF ANY KIND IS EXPRESSED OR IMPLIED. 
DO NOT USE THIS SOFTWARE IF YOU ARE NOT CONFIDENT IN RESTORING YOUR DEVICE FROM A FAILED STATE.

Contributing

Pull requests are welcome. For major changes, please open an issue first to discuss what you would like to change.

Thank You

Inspired by HclX, bakueikozo, and mnakada!

Thank you to everyone who is passionate about Wyze products for making the devices popular, and thank you to Wyze for producing them. Sign up for CamPlus, show some love and support to the company.

Thanks for HclX for WyzeHacks! https://github.com/HclX/WyzeHacks/

Thank you mnakada for his atomcam_tools fork! https://github.com/mnakada/atomcam_tools

Thank you bakueikozo for his atomcam_tools repo! https://github.com/bakueikozo/atomcam_tools

Thank you to virmaior for the atomcam_tools tip!