Move shared-memory ownership, LGMP session handling, queue access, and
DMA setup behind a transport interface. The LGMP backend preserves the
existing zero-copy frame and DMA paths while owning its lgmp:* options.
Expose the initialized EGL context through a versioned renderer interop
record for future accelerated decode backends. Add an LGMP-independent,
deterministic test transport for graphics-pipeline validation.
Model playback latency from the device period, arrival jitter, source
packet phase, and resampler delay. Treat audio:latencyOffset as an
explicit addition to this minimum and align the first device pull to
the next packet deadline. This starts playback near its steady-state
target without unnecessary prefill or startup underruns. Use a
512-frame default period as a practical low-latency baseline.
Replace the startup clock hold with a one-sided proportional
acquisition controller, then hand off to source/device rate
feed-forward and a slow phase loop. Calibrate the logical device
timeline at handoff, discard correction that opposes the current
error, and slew-limit rate changes. This prevents startup drain,
integral wind-up, overshoot, and long convergence while preserving
clock-drift compensation.
Allow audio backends to expose a real-time resampler and use
PipeWire's adaptive resampler when version 1.4 or newer supports it.
Retain libsamplerate as the fallback and add audio:resampler to select
the implementation. Wait for PipeWire stream setup to complete and
propagate rate-control failures cleanly.
Track PipeWire input-consumption and output-equivalent clocks
separately. The input clock measures ring latency while the output
clock drives feed-forward using the ratio that governed each request.
This removes delayed self-feedback that made adaptive resampling
oscillate between the correction limits.
Reduce audio:debug output to useful latency, clock, jitter, and xrun
values, and scale the playback graph from the startup estimate. Update
the option names and documentation for the new latency model.
Drive playback timing from audio sample positions instead of packet
arrival cadence. Use SPICE multimedia timestamps to anchor streams,
detect discontinuities, and estimate the long-term source rate. Ignore
their coarse phase corrections when steering the playback buffer.
Measure the device clock independently and wait for it to stabilize
before enabling a bounded, slew-limited phase controller. Align startup
buffering from logical producer and consumer positions so backend
startup reserves do not become persistent latency.
Size the buffer from the backend period, measured delivery jitter, and
resampler delay. Update PipeWire and PulseAudio to report their actual
startup requirements and presentation latency. Default to a 10 ms
device period with 4 ms of additional buffering, and make detailed
synchronization diagnostics opt-in through audio:debug.
This reduces startup and steady-state latency while compensating for
physical and virtual device clock drift without reacting to transport
jitter or SPICE timestamp quantization.
This change alters the small square dot cursor to a more visible 16x16
cursor for X11. A new option `spice:largeDotCursor` can be set to use an
alternative 32x32 cursor for the vision impaired.
This adds a new `audio:bufferLatency` option which allows the user to
adjust the amount of buffering LG does over the absolute bare minimum. By
default, this is set large enough to absorb typical timing jitter from
Spice. Users may reduce this if they care more about latency than audio
quality.
This adds a new `audio:periodSize` option which defaults to 2048 frames.
For PipeWire, this controls the `PIPEWIRE_LATENCY` value. For PulseAudio,
the controls the target buffer length (`tlength`) value.
This prevents LGMP_ERR_QUEUE_FULL from happening with high polling rate
mice, which is caused by receiving many more mouse events while the
guest cursor warps, triggering more warps.
When using jitRender, or on the first frame of an alert the window
doesn't get resized immediately causing it to cut off the end of the
text.
ImGui needs two passes to calulate the bounding box for automatically
sized windows, this is per it's design and not a bug, see:
https://github.com/ocornut/imgui/issues/2158#issuecomment-434223618
