Model playback latency from the device period, arrival jitter, source
packet phase, and resampler delay. Treat audio:latencyOffset as an
explicit addition to this minimum and align the first device pull to
the next packet deadline. This starts playback near its steady-state
target without unnecessary prefill or startup underruns. Use a
512-frame default period as a practical low-latency baseline.
Replace the startup clock hold with a one-sided proportional
acquisition controller, then hand off to source/device rate
feed-forward and a slow phase loop. Calibrate the logical device
timeline at handoff, discard correction that opposes the current
error, and slew-limit rate changes. This prevents startup drain,
integral wind-up, overshoot, and long convergence while preserving
clock-drift compensation.
Allow audio backends to expose a real-time resampler and use
PipeWire's adaptive resampler when version 1.4 or newer supports it.
Retain libsamplerate as the fallback and add audio:resampler to select
the implementation. Wait for PipeWire stream setup to complete and
propagate rate-control failures cleanly.
Track PipeWire input-consumption and output-equivalent clocks
separately. The input clock measures ring latency while the output
clock drives feed-forward using the ratio that governed each request.
This removes delayed self-feedback that made adaptive resampling
oscillate between the correction limits.
Reduce audio:debug output to useful latency, clock, jitter, and xrun
values, and scale the playback graph from the startup estimate. Update
the option names and documentation for the new latency model.
In 3625207801 I attempted to add
non-breaking spaces to a filepath so it would stay on one line.
Before this I had accidentally deleted my work but found it saved
in my sphinx build cache, so I copied my changes from that cache.
Unfortunately the cached version replaced non-breaking spaces with
real spaces and 3625207801 was made
reverted.
This commit re-adds the non-breaking spaces.
