LwoNameValue::FromString (0x010fa220) splits a config at every comma
and line break and leaves out entries without a '='; the world split
only at line breaks. Objects and sounds are now split the client's way.
ReadLvlObjectData (0x0103ba20) also adjusts an object's config as it
loads it, and now so does the world:
- before version 47 a respawn time was in milliseconds: a float over
100, or any u32, becomes seconds (a float);
- a model spawner (LOT 176 spawning template 14) gets its blueprint
from its subkey unless it has one, behaviors off unless it says
otherwise, and no render wrapping;
- before version 44 an object that overrides its scene goes to layer 0
of the scene it names.
Check in game: every world spawns its objects as before; spawner
respawn times are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Files from before chunks now read their sounds and particles after the
objects, and chunked files their particle chunk:
- sounds (SceneLoader::LoadSounds, version 5 on, only before chunks):
position and config (before 35 a 260 character name, kept as
soundName);
- particles (SceneLoader::LoadParticles, version 5 on): priority (43
on), position, rotation, effect names and config (46 on; before, an
unused u16); the client stops at one with no effect, and before 44 a
file may end before them.
Every scene file of every client on disk reads each part to the next
part's start (up to the client's 16 byte padding): 5408 referenced by
zone files and 5125 on disk, versions 31-43 before chunks and 44-49
chunked. One client file, a LUP world, ends before its sounds; its
objects are kept.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The world read only a scene's objects and skipped the rest with
file.ignore. Level now reads a .lvl the way SceneLoader::LoadLvlFile
does (1.10.64) and keeps what it reads.
Chunked files: the file info chunk gives where the environment, object
and particle chunks start (the chunks were walked in order before); the
environment chunk gives where the lighting, skydome and editor settings
start, and the client reads all three only when there is lighting.
Files from before chunks: the no-editor-settings byte only from version
32, the revision from 37, a file newer than 48 is not read, a file
older than 3 has no objects; then lighting, skydome, editor settings
and objects in turn.
Kept, by version:
- lighting: blend time (45 on, default 10), ambient, specular, upper
hemisphere, position, min and max draw distances (31 on; before 39
fog near and far only), cull settings (40 on), fog colour (31 on),
directional colour (36 on), and before 42 the zone's spawn point
(before 33 the fixed one the client uses);
- the skydome and its five other files (34 on; they were skipped from
33);
- the editor's colours (37 on, the first 32);
- each object's node type (38 on), glom ID (32 on) and render
techniques (7 on: a 64 byte name, then per technique a 64 byte name,
u32, u8 and 16 floats); before, a count of techniques was read and
the techniques themselves were not, so an object with any misread
the rest of the file.
Object config is split at line breaks as before. A file that ends early
keeps the objects read before its end.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* feat: raw terrain parsing for scene data
Replace old dNavigation/dTerrain raw parser with new Raw module in
dZoneManager. Parse heightmaps, color maps, and scene maps from .raw
files to determine which scene a position belongs to. Build scene
adjacency graph from terrain data and scene transitions.
Adds NiColor type, SceneColor lookup table, eSceneType enum, terrain
mesh generation with OBJ export, and debug slash commands for scene
visualization.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* refactor: deduplicate terrain grid lookup logic, remove unnecessary cast
Add IsValidForSceneLookup(), GetSceneIDAtGrid(), and GridToWorldPos()
to Raw::Chunk. Use them in GenerateTerrainMesh, GetSceneIDFromPosition,
SpawnScenePoints, and SpawnAllScenePoints instead of duplicated inline
math. Remove unnecessary static_cast in LoadSceneTransitionInfo.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* fix: add version < 32 support to raw terrain parser
The parser was only correct for v32 files. For v<32:
- colorMapResolution is width-1, not width
- Color map reads width*width*4 bytes (BGRA per-pixel), not colorMapRes^2*4
- No DDS lightmap
- No texture settings byte or blend DDS
- Scene map: v31 reads (colorMapRes+1)^2 cells with border skip,
v<31 skips 1 byte
- No mesh data
Verified against all 309 .raw files across multiple client versions.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* fix: log and reject legacy raw terrain format, clean up ReadRaw API
Log a clear message and throw if the zone uses a legacy raw format
(LUZ version < 30) since no known maps use it. Remove ReadLegacyRaw
and the mapVersion parameter from ReadRaw.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* fix: revert v33 scene field renames to unknown1/unknown2
These fields are skipped by the client in every known build (ptr += 12
and ptr += 4). No client ever reads them into a struct. Keep the
original unknown1/unknown2 names from main.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* fix: load the zone without scene lookups when its raw terrain is missing or unreadable
Log at debug when it parses; build the terrain mesh only for the OBJ export; read the zone name and description only for version 31 and later, as the client does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix: look up the scene at a position as the client does, in constant time
Chunk bounds span (width - 1) * scale; the nearest scene map cell is used and the far edge is kept one cell inside. Chunks are indexed by grid cell when they form a grid. Skipping reads instead of seeking, so a cut-off file can't seek past the end. Terrain mesh indices follow the vertex order.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* feat: scene point commands take a step and use brick LOTs from the BrickIDTable
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* chore: rename NiColor::ToXYZ to Luminance
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* test: raw terrain reading, scene lookup, scene graph and scene commands
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* test: close the OBJ file before removing it so the test passes on Windows
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix: keep the zone boundary lines and read the luz scene count as the client does
Each boundary line's destination is read as a map ID and an instance ID into a LWOZONEID. The scene count is a byte before version 37 and a u32 from it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix: name the fourth flair colour byte padding
The client never sets or reads it, so it holds leftover memory.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix: keep the scene map of version 31 and older raws
These files have a (resolution + 1)^2 scene map, kept in sceneMapLegacy. Version 31 uses its first resolution rows and columns; older versions are all scene 0, as in the client.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* refactor: simplify the raw heightmap size check
The dimensions are capped at kMaxResolution, so the product can't overflow.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* chore: remove the scene point spawn commands and send /getadjacentscenes as one message
The spawn commands were only for testing. /getscene and /getadjacentscenes stay.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
