91 lines
3.1 KiB
Bash
Executable File
91 lines
3.1 KiB
Bash
Executable File
#!/bin/bash
|
|
#
|
|
# A fork of brezlord's fan control script. https://github.com/brezlord/iDRAC7_fan_control
|
|
# A simple script to control fan speeds on Dell generation 12 PowerEdge servers.
|
|
# If the inlet temperature is above $TEMP_THRESHOLD C enable iDRAC dynamic control and exit program.
|
|
# If inlet temp is below $TEMP_THRESHOLD C set fan control to manual and set fan speed to predetermined value.
|
|
# The tower servers T320, T420 & T620 inlet temperature sensor is after the HDDs so temperature will
|
|
# be higher than the ambient temperature.
|
|
|
|
# Variables
|
|
IDRAC_IP=""
|
|
IDRAC_USER=""
|
|
IDRAC_PASSWORD=""
|
|
# Fan speed in %
|
|
SPEED0="0x00"
|
|
SPEED5="0x05"
|
|
SPEED10="0x0a"
|
|
SPEED15="0x0f"
|
|
SPEED20="0x14"
|
|
SPEED25="0x19"
|
|
SPEED30="0x1e"
|
|
SPEED35="0x23"
|
|
TEMP_THRESHOLD="45" # iDRAC dynamic control enable thershold
|
|
#TEMP_SENSOR="04h" # Inlet Temp
|
|
TEMP_SENSOR="01h" # Exhaust Temp
|
|
#TEMP_SENSOR="0Eh" # CPU 1 Temp
|
|
#TEMP_SENSOR="0Fh" # CPU 2 Temp
|
|
SENSOR_NAME="Sensor"
|
|
if [ "$TEMP_SENSOR" == "04h" ]
|
|
then
|
|
SENSOR_NAME="Inlet"
|
|
elif [ "$TEMP_SENSOR" == "01h" ]
|
|
then
|
|
SENSOR_NAME="Exhaust"
|
|
elif [ "$TEMP_SENSOR" == "0Eh" ]
|
|
then
|
|
SENSOR_NAME="CPU1"
|
|
elif [ "$TEMP_SENSOR" == "0Fh" ]
|
|
then
|
|
SENSOR_NAME="CPU2"
|
|
fi
|
|
# Get system date & time.
|
|
DATE=$(date +%d-%m-%Y\ %H:%M:%S)
|
|
echo "Date $DATE"
|
|
|
|
# Get temperature from iDARC.
|
|
T=$(ipmitool -I lanplus -H $IDRAC_IP -U $IDRAC_USER -P $IDRAC_PASSWORD sdr type temperature | grep $TEMP_SENSOR | cut -d"|" -f5 | cut -d" " -f2)
|
|
echo "--> iDRAC IP Address: $IDRAC_IP"
|
|
echo "--> Current $SENSOR_NAME Temp: $T"
|
|
|
|
# If ambient temperature is above $TEMP_THRESHOLD C enable dynamic control and exit, if below set manual control.
|
|
if [[ $T > $TEMP_THRESHOLD ]]
|
|
then
|
|
echo "--> Temperature is above $TEMP_THRESHOLD C"
|
|
echo "--> Enabled dynamic fan control"
|
|
ipmitool -I lanplus -H $IDRAC_IP -U $IDRAC_USER -P $IDRAC_PASSWORD raw 0x30 0x30 0x01 0x01
|
|
exit 1
|
|
else
|
|
echo "--> Temperature is below $TEMP_THRESHOLD C"
|
|
echo "--> Disabled dynamic fan control"
|
|
ipmitool -I lanplus -H $IDRAC_IP -U $IDRAC_USER -P $IDRAC_PASSWORD raw 0x30 0x30 0x01 0x00
|
|
fi
|
|
|
|
# Set fan speed dependant on ambient temperature if inlet temperaturte is below $TEMP_THRESHOLD C.
|
|
# If inlet temperature between 0 and 19deg C then set fans to 15%.
|
|
if [ "$T" -ge 0 ] && [ "$T" -le 19 ]
|
|
then
|
|
echo "--> Setting fan speed to 15%"
|
|
ipmitool -I lanplus -H $IDRAC_IP -U $IDRAC_USER -P $IDRAC_PASSWORD raw 0x30 0x30 0x02 0xff $SPEED15
|
|
|
|
# If inlet temperature between 20 and 24deg C then set fans to 20%
|
|
elif [ "$T" -ge 20 ] && [ "$T" -le 24 ]
|
|
then
|
|
echo "--> Setting fan speed to 20%"
|
|
ipmitool -I lanplus -H $IDRAC_IP -U $IDRAC_USER -P $IDRAC_PASSWORD raw 0x30 0x30 0x02 0xff $SPEED20
|
|
|
|
# If inlet temperature between 25 and 29deg C then set fans to 25%
|
|
elif [ "$T" -ge 25 ] && [ "$T" -le 29 ]
|
|
then
|
|
echo "--> Setting fan speed to 25%"
|
|
ipmitool -I lanplus -H $IDRAC_IP -U $IDRAC_USER -P $IDRAC_PASSWORD raw 0x30 0x30 0x02 0xff $SPEED25
|
|
|
|
# If inlet temperature between 30 and $TEMP_THRESHOLD C then set fans to 30%
|
|
elif [ "$T" -ge 30 ] && [ "$T" -le $TEMP_THRESHOLD ]
|
|
then
|
|
echo "--> Setting fan speed to 25%"
|
|
ipmitool -I lanplus -H $IDRAC_IP -U $IDRAC_USER -P $IDRAC_PASSWORD raw 0x30 0x30 0x02 0xff $SPEED25
|
|
fi
|
|
|
|
|