yay I learned git
This commit is contained in:
parent
15b70241e0
commit
de72d8ab5e
17
das_fanctl.sh
Executable file
17
das_fanctl.sh
Executable file
@ -0,0 +1,17 @@
|
||||
#/bin/bash
|
||||
|
||||
#Zeb H.
|
||||
#Dell MD1200 Fan Silencing Script.
|
||||
|
||||
#set TTY Flags
|
||||
stty -F /dev/ttyS1 38400 raw -echoe -echok -echoctl -echoke
|
||||
|
||||
#Run 12 times, sleeping 5 seconds in between (total runtime: 1 min)
|
||||
|
||||
for i in $(seq 1 12)
|
||||
do
|
||||
|
||||
#Change the value vv here to set fan percentage
|
||||
echo -e -n '_shutup 15\r' > /dev/ttyS1
|
||||
sleep 5
|
||||
done
|
91
fan_control.sh
Executable file
91
fan_control.sh
Executable file
@ -0,0 +1,91 @@
|
||||
#!/bin/bash
|
||||
#
|
||||
# https://github.com/brezlord/iDRAC7_fan_control
|
||||
# A simple script to control fan speeds on Dell generation 12 PowerEdge servers.
|
||||
# If the inlet temperature is above $TEMP_THRESHOLD C enable iDRAC dynamic control and exit program.
|
||||
# If inlet temp is below $TEMP_THRESHOLD C set fan control to manual and set fan speed to predetermined value.
|
||||
# The tower servers T320, T420 & T620 inlet temperature sensor is after the HDDs so temperature will
|
||||
# be higher than the ambient temperature.
|
||||
|
||||
# Variables
|
||||
IDRAC_IP="10.1.1.251"
|
||||
IDRAC_USER="root"
|
||||
IDRAC_PASSWORD="*^b#!efRhE8qULqUCa4U"
|
||||
#ENCRYPT_KEY="9233879628486273445939847673574256378762"
|
||||
# Fan speed in %
|
||||
SPEED0="0x00"
|
||||
SPEED5="0x05"
|
||||
SPEED10="0x0a"
|
||||
SPEED15="0x0f"
|
||||
SPEED20="0x14"
|
||||
SPEED25="0x19"
|
||||
SPEED30="0x1e"
|
||||
SPEED35="0x23"
|
||||
TEMP_THRESHOLD="45" # iDRAC dynamic control enable thershold
|
||||
#TEMP_SENSOR="04h" # Inlet Temp
|
||||
TEMP_SENSOR="01h" # Exhaust Temp
|
||||
#TEMP_SENSOR="0Eh" # CPU 1 Temp
|
||||
#TEMP_SENSOR="0Fh" # CPU 2 Temp
|
||||
SENSOR_NAME="Sensor"
|
||||
if [ "$TEMP_SENSOR" == "04h" ]
|
||||
then
|
||||
SENSOR_NAME="Inlet"
|
||||
elif [ "$TEMP_SENSOR" == "01h" ]
|
||||
then
|
||||
SENSOR_NAME="Exhaust"
|
||||
elif [ "$TEMP_SENSOR" == "0Eh" ]
|
||||
then
|
||||
SENSOR_NAME="CPU1"
|
||||
elif [ "$TEMP_SENSOR" == "0Fh" ]
|
||||
then
|
||||
SENSOR_NAME="CPU2"
|
||||
fi
|
||||
# Get system date & time.
|
||||
DATE=$(date +%d-%m-%Y\ %H:%M:%S)
|
||||
echo "Date $DATE"
|
||||
|
||||
# Get temperature from iDARC.
|
||||
T=$(ipmitool -I lanplus -H $IDRAC_IP -U $IDRAC_USER -P $IDRAC_PASSWORD sdr type temperature | grep $TEMP_SENSOR | cut -d"|" -f5 | cut -d" " -f2)
|
||||
echo "--> iDRAC IP Address: $IDRAC_IP"
|
||||
echo "--> Current $SENSOR_NAME Temp: $T"
|
||||
|
||||
# If ambient temperature is above $TEMP_THRESHOLD C enable dynamic control and exit, if below set manual control.
|
||||
if [[ $T > $TEMP_THRESHOLD ]]
|
||||
then
|
||||
echo "--> Temperature is above $TEMP_THRESHOLD C"
|
||||
echo "--> Enabled dynamic fan control"
|
||||
ipmitool -I lanplus -H $IDRAC_IP -U $IDRAC_USER -P $IDRAC_PASSWORD raw 0x30 0x30 0x01 0x01
|
||||
exit 1
|
||||
else
|
||||
echo "--> Temperature is below $TEMP_THRESHOLD C"
|
||||
echo "--> Disabled dynamic fan control"
|
||||
ipmitool -I lanplus -H $IDRAC_IP -U $IDRAC_USER -P $IDRAC_PASSWORD raw 0x30 0x30 0x01 0x00
|
||||
fi
|
||||
|
||||
# Set fan speed dependant on ambient temperature if inlet temperaturte is below $TEMP_THRESHOLD C.
|
||||
# If inlet temperature between 0 and 19deg C then set fans to 15%.
|
||||
if [ "$T" -ge 0 ] && [ "$T" -le 19 ]
|
||||
then
|
||||
echo "--> Setting fan speed to 15%"
|
||||
ipmitool -I lanplus -H $IDRAC_IP -U $IDRAC_USER -P $IDRAC_PASSWORD raw 0x30 0x30 0x02 0xff $SPEED15
|
||||
|
||||
# If inlet temperature between 20 and 24deg C then set fans to 20%
|
||||
elif [ "$T" -ge 20 ] && [ "$T" -le 24 ]
|
||||
then
|
||||
echo "--> Setting fan speed to 20%"
|
||||
ipmitool -I lanplus -H $IDRAC_IP -U $IDRAC_USER -P $IDRAC_PASSWORD raw 0x30 0x30 0x02 0xff $SPEED20
|
||||
|
||||
# If inlet temperature between 25 and 29deg C then set fans to 25%
|
||||
elif [ "$T" -ge 25 ] && [ "$T" -le 29 ]
|
||||
then
|
||||
echo "--> Setting fan speed to 25%"
|
||||
ipmitool -I lanplus -H $IDRAC_IP -U $IDRAC_USER -P $IDRAC_PASSWORD raw 0x30 0x30 0x02 0xff $SPEED25
|
||||
|
||||
# If inlet temperature between 30 and $TEMP_THRESHOLD C then set fans to 30%
|
||||
elif [ "$T" -ge 30 ] && [ "$T" -le $TEMP_THRESHOLD ]
|
||||
then
|
||||
echo "--> Setting fan speed to 25%"
|
||||
ipmitool -I lanplus -H $IDRAC_IP -U $IDRAC_USER -P $IDRAC_PASSWORD raw 0x30 0x30 0x02 0xff $SPEED25
|
||||
fi
|
||||
|
||||
|
Loading…
Reference in New Issue
Block a user