Allow for the user to override the auto-detect Ethernet code.

Also, update README for this change
This commit is contained in:
Scott Kilau 2022-06-21 09:01:45 -05:00
parent 0bd0c36401
commit 618018fc05
3 changed files with 40 additions and 30 deletions

View File

@ -152,12 +152,15 @@ USB Ethernet Adapter support:
```
ENABLE_USB_ETH="true"
ENABLE_USB_ETH_MODULES="asix,r8152,cdc_ether"
ENABLE_USB_ETH_MODULE=""
```
available modules: asix, ax88179_178a, cdc_ether, r8152
To have the Ethernet NIC be auto-detected, set the ENABLE_USB_ETH_MODULE value to an empty string, eq: ""
the next time you boot your camera, make sure your USB Ethernet Adapter is connected to the camera and ethernet. The camera has to be setup initially with Wi-Fi for this to work. After setup, Wi-Fi is no longer needed, as long as you are using the USB Ethernet Adapter. Note that using USB Ethernet disables the onboard Wi-Fi. Specify the driver you need for your specific USB Ethernet adapter. asix is listed by default.
To load a specific USB Ethernet NIC driver, set ENABLE_USB_ETH_MODULE to one of the following:
asix, ax88179_178a, cdc_ether, r8152
The next time you boot your camera, make sure your USB Ethernet Adapter is connected to the camera and ethernet. The camera has to be setup initially with Wi-Fi for this to work. After setup, Wi-Fi is no longer needed, as long as you are using the USB Ethernet Adapter. Note that using USB Ethernet disables the onboard Wi-Fi.
---

View File

@ -277,33 +277,39 @@ if [[ "$ENABLE_USB_ETH" == "true" ]]; then
insmod $KMOD_PATH/kernel/drivers/net/usb/usbnet.ko
for DEVICE in `lsusb | awk '{print $6}'| tr '[:upper:]' '[:lower:]'`; do
case $DEVICE in
'077b:2226' | '0846:1040' | '2001:1a00' | '0b95:1720' | '07b8:420a' |\
'08dd:90ff' | '0557:2009' | '0411:003d' | '0411:006e' | '6189:182d' |\
'0df6:0056' | '07aa:0017' | '1189:0893' | '1631:6200' | '04f1:3008' |\
'17ef:7203' | '0b95:772b' | '0b95:7720' | '0b95:1780' | '0789:0160' |\
'13b1:0018' | '1557:7720' | '07d1:3c05' | '2001:3c05' | '2001:1a02' |\
'1737:0039' | '04bb:0930' | '050d:5055' | '05ac:1402' | '0b95:772a' |\
'14ea:ab11' | '0db0:a877' | '0b95:7e2b' | '0b95:172a' | '066b:20f9')
echo "Loading ASIX Ethernet driver..."
modprobe asix
;;
'0b95:1790' | '0b95:178a' | '0df6:0072')
echo "Loading AX88179 Gigabit Ethernet driver..."
modprobe ax88179_178a
;;
'1004:61aa' | '046d:c11f' | '1410:b001' | '1410:9010' | '413c:8195' |\
'413c:8196' | '413c:819b' | '16d5:650a' | '12d1:14ac' | '0bda:8152')
echo "Loading USB CDC Ethernet driver..."
modprobe cdc_ether
;;
'0bda:8152')
echo "Loading Realtek RTL8152 driver..."
modprobe r8152
;;
esac
done
# Should we load a specific Ethernet driver, or try to auto-detect one
if [[ "ENABLE_USB_ETH_MODULE" != "" ]]; then
insmod $KMOD_PATH/kernel/drivers/net/usb/$ENABLE_USB_ETH_MODULE.ko
else
# Auto-Detect an Ethernet Driver and load it
for DEVICE in `lsusb | awk '{print $6}'| tr '[:upper:]' '[:lower:]'`; do
case $DEVICE in
'077b:2226' | '0846:1040' | '2001:1a00' | '0b95:1720' | '07b8:420a' |\
'08dd:90ff' | '0557:2009' | '0411:003d' | '0411:006e' | '6189:182d' |\
'0df6:0056' | '07aa:0017' | '1189:0893' | '1631:6200' | '04f1:3008' |\
'17ef:7203' | '0b95:772b' | '0b95:7720' | '0b95:1780' | '0789:0160' |\
'13b1:0018' | '1557:7720' | '07d1:3c05' | '2001:3c05' | '2001:1a02' |\
'1737:0039' | '04bb:0930' | '050d:5055' | '05ac:1402' | '0b95:772a' |\
'14ea:ab11' | '0db0:a877' | '0b95:7e2b' | '0b95:172a' | '066b:20f9')
echo "Loading ASIX Ethernet driver..."
modprobe asix
;;
'0b95:1790' | '0b95:178a' | '0df6:0072')
echo "Loading AX88179 Gigabit Ethernet driver..."
modprobe ax88179_178a
;;
'1004:61aa' | '046d:c11f' | '1410:b001' | '1410:9010' | '413c:8195' |\
'413c:8196' | '413c:819b' | '16d5:650a' | '12d1:14ac' | '0bda:8152')
echo "Loading USB CDC Ethernet driver..."
modprobe cdc_ether
;;
'0bda:8152')
echo "Loading Realtek RTL8152 driver..."
modprobe r8152
;;
esac
done
fi
if [[ "$BONDING_ENABLED" == "true" ]]; then
if [[ "$BONDING_LINK_MONITORING_FREQ_MS" == "" ]]; then

View File

@ -12,6 +12,7 @@ WEB_CAM_FPS_RATE="25"
CUSTOM_HOSTNAME="WCV3"
ENABLE_USB_ETH="false"
ENABLE_USB_ETH_MODULE=""
ENABLE_USB_DIRECT="false"
USB_DIRECT_MAC_ADDR="02:01:02:03:04:08"