1162 Commits

This Branch

This Branch

All Branches

Author	SHA1	Message	Date
Teemu R.	ff261878e0	Prepare 0.11.0.1 (#1780) ... ## [0.11.0.1](https://github.com/python-kasa/python-kasa/tree/0.11.0.1) (2026-10-04) [Full Changelog](https://github.com/python-kasa/python-kasa/compare/0.10.2...0.11.0.1) **Release summary:** *Note: 0.11.0 was tagged but never published to PyPI due to a packaging issue. 0.11.0.1 contains the same changes plus a fix for the release workflow.* This is a huge and long overdue release, coming more than a year and a half after the previous one. Hopefully the next one follows sooner, as the TPAP transport (which did not make it into this release) is used more and more on newer devices. This release brings broader camera support, new modules for lights, vacuums and cameras, and many connectivity fixes for newer firmware versions. Some other highlights: - Improved Tapo camera support: login version 3, presets, wifi handling, last alert detection, and more robust authentication and discovery. - Selective room cleaning for robot vacuums. - Configurable light strip length via the new strip segment module, and an exposed light transition state change flag. - Basic HomeKit module for Kasa (iot) devices. - Energy monitoring V2 support (S515D). - Better hub and thermostat state reporting (hold, summer mode, low battery). - Connection fixes for newer Tapo firmware and older SSL devices, plus KLAP v2 for iot devices. - More resilient time handling, with failover and UTC fallback for iot devices. - Python 3.14 is now supported. - Inclusion of fixtures for 29 devices or firmware versions, including the Tapo C460, C200 and C101 cameras and the KH100 hub with KE100/KE110 thermostats. **Thank you to all contributors!** A big thank you to everyone who contributed to this release, whether through code, device fixtures, bug reports or testing. Special thanks to @ZeliardM for a huge effort on both features and project maintenance, including but not limited to: - Features like the HomeKit module for iot devices, iot time module failover, wifi handling and credential improvements for cameras, Tapo login version 3, and V2 energy monitoring for S515D. - A lot of necessary maintenance work including type annotations and cleanups throughout the test suite, modernized docstrings, CI hardening with SHA-pinned actions, and many bug fixes. This helps us to keep the library maintainable and open to new contributions. A warm welcome to our new contributors, with special thanks to those who contributed improvements and fixes: - @alams154: discovery on port 20004 - @bluntman001: iot device classification fix - @bm1549: KLAP v2 transport for iot devices - @darylldelfin: cipher support for newer Tapo firmware - @davidefiocco: vacuum mop water level fix - @epg-pers: selective room cleaning for vacuums - @freeKC: camera discovery and authentication fixes - @gpongelli: extended camera detection - @Ikstar: KL420 color temperature range - @juherr: last alert detection module for cameras, camera error codes and a C200 fixture - @kad: SSL connections to older devices - @KaloyanNaumov: multi-request timeout handling - @loganrosen: KL400L5 color temperature range - @markvanpraet: Tapo C460 support and camera battery fix - @monteccarlos: iot timezone mapping fix - @mrwogu: preset support for Tapo cameras - @nopoz: strip segment module, light transition flag and credentials hash fix - @tk1475: UTC fallback for unset iot device clocks - @wh1t3f1r3: non-retryable network error handling Thanks also to our new contributors who provided device fixtures to help future development efforts: @emanueleg, @fantandrea, @HarryPehkonen, @ijaron, @Krotu, @LostLuma, @mjbohr and @TheLinuxGuy. **This release in numbers:** - 68 merged pull requests from 29 contributors, 27 of them first-time contributors - 8 new modules - 29 new device fixtures - 203 files changed, with 25,199 lines added and 2,585 removed **Implemented enhancements:** - \[Feature Request\] C220 camera line crossing detection on-off switch [\#1551](https://github.com/python-kasa/python-kasa/issues/1551) - SslAesTransport: handshake again when a camera answers 401 to passthrough [\#1771](https://github.com/python-kasa/python-kasa/pull/1771) (@freeKC) - Add LastAlertDetection module for smartcam devices [\#1762](https://github.com/python-kasa/python-kasa/pull/1762) (@juherr) - Add KL420 to TPLINK\_KELVIN color temperature ranges [\#1757](https://github.com/python-kasa/python-kasa/pull/1757) (@Ikstar) - Do not authenticate with a credentials\_hash from a different transport [\#1749](https://github.com/python-kasa/python-kasa/pull/1749) (@nopoz) - Expose the light transition state change flag [\#1745](https://github.com/python-kasa/python-kasa/pull/1745) (@nopoz) - Add strip segment module for configurable light strip length [\#1744](https://github.com/python-kasa/python-kasa/pull/1744) (@nopoz) - Add KL400L5 color temperature range [\#1719](https://github.com/python-kasa/python-kasa/pull/1719) (@loganrosen) - Update smartcam credential handling and tests [\#1664](https://github.com/python-kasa/python-kasa/pull/1664) (@ZeliardM) - Add support for V2 Energy Monitoring for S515D [\#1663](https://github.com/python-kasa/python-kasa/pull/1663) (@ZeliardM) - Add selective room cleaning to vacuum clean module [\#1660](https://github.com/python-kasa/python-kasa/pull/1660) (@epg-pers) - New Wi-Fi handling for SMARTCAM devices [\#1639](https://github.com/python-kasa/python-kasa/pull/1639) (@ZeliardM) - Add support for tapo login\_version 3 in sslaestransport [\#1638](https://github.com/python-kasa/python-kasa/pull/1638) (@ZeliardM) - Add preset support for Tapo cameras [\#1615](https://github.com/python-kasa/python-kasa/pull/1615) (@mrwogu) - Add python 3.14 to supported versions [\#1599](https://github.com/python-kasa/python-kasa/pull/1599) (@rytilahti) - Add discovery port 20004 [\#1595](https://github.com/python-kasa/python-kasa/pull/1595) (@alams154) - Implement IOT Time Module Failover [\#1583](https://github.com/python-kasa/python-kasa/pull/1583) (@ZeliardM) - Add bare bones homekit module for iot devices [\#1566](https://github.com/python-kasa/python-kasa/pull/1566) (@ZeliardM) - Extend smartcam detection support [\#1552](https://github.com/python-kasa/python-kasa/pull/1552) (@gpongelli) **Fixed bugs:** - Time module unavailable for waterleak sensor [\#1613](https://github.com/python-kasa/python-kasa/issues/1613) - 'No time zone found with key EST' in debian 13 [\#1579](https://github.com/python-kasa/python-kasa/issues/1579) - Discovery: accept cameras that only send the encrypt\_type list [\#1770](https://github.com/python-kasa/python-kasa/pull/1770) (@freeKC) - Classify IOT devices via sysinfo regardless of transport \(fixes \#1740\) [\#1769](https://github.com/python-kasa/python-kasa/pull/1769) (@bluntman001) - Fall back to UTC for iot time when the device clock is not set [\#1768](https://github.com/python-kasa/python-kasa/pull/1768) (@tk1475) - Add UNKNOWN\_USERNAME \(-60502\) camera error code [\#1761](https://github.com/python-kasa/python-kasa/pull/1761) (@juherr) - Disable multi requests on timeout during multi-request [\#1759](https://github.com/python-kasa/python-kasa/pull/1759) (@KaloyanNaumov) - Add ECDHE-RSA-AES256 cipher for newer Tapo firmware [\#1755](https://github.com/python-kasa/python-kasa/pull/1755) (@darylldelfin) - Map iot timezone index 18 to America/New\_York instead of EST [\#1743](https://github.com/python-kasa/python-kasa/pull/1743) (@monteccarlos) - fix: use KLAP v2 transport for IOT devices with login version 2 [\#1731](https://github.com/python-kasa/python-kasa/pull/1731) (@bm1549) - Add ENETUNREACH to non-retryable errors in XorTransport [\#1668](https://github.com/python-kasa/python-kasa/pull/1668) (@wh1t3f1r3) - Fix mop set\_waterlevel sending setCleanAttr without type field [\#1667](https://github.com/python-kasa/python-kasa/pull/1667) (@davidefiocco) - Fix SMARTCAM Time module and update tests [\#1659](https://github.com/python-kasa/python-kasa/pull/1659) (@ZeliardM) - Fix camera login version in CLI [\#1658](https://github.com/python-kasa/python-kasa/pull/1658) (@ZeliardM) - Allow SSL connections to older devices [\#1654](https://github.com/python-kasa/python-kasa/pull/1654) (@kad) - waterleaksensor: use parent's Time for alert timestamp [\#1614](https://github.com/python-kasa/python-kasa/pull/1614) (@rytilahti) - Add hold state to thermostatstate [\#1609](https://github.com/python-kasa/python-kasa/pull/1609) (@rytilahti) - Fix thermostat idle reporting on low battery [\#1598](https://github.com/python-kasa/python-kasa/pull/1598) (@rytilahti) - Add shutdown \(summer mode\) to thermostatstate [\#1588](https://github.com/python-kasa/python-kasa/pull/1588) (@rytilahti) - Fix iotstrip child device time handling [\#1584](https://github.com/python-kasa/python-kasa/pull/1584) (@ZeliardM) **Added support for devices:** - Add C200 device fixture [\#1760](https://github.com/python-kasa/python-kasa/pull/1760) (@juherr) - Add P125M fixture for firmware 1.4.4 [\#1746](https://github.com/python-kasa/python-kasa/pull/1746) (@HarryPehkonen) - Add fixtures for KH100, KE100 and KE110 and simulate TRV states [\#1726](https://github.com/python-kasa/python-kasa/pull/1726) (@Krotu) - Add L530EA\(EU\) device fixture [\#1694](https://github.com/python-kasa/python-kasa/pull/1694) (@ZeliardM) - Add C101 test fixture [\#1673](https://github.com/python-kasa/python-kasa/pull/1673) (@ijaron) - Add LB130\(US\) device fixture [\#1669](https://github.com/python-kasa/python-kasa/pull/1669) (@ZeliardM) - Add KL110B\(UN\) device fixture [\#1657](https://github.com/python-kasa/python-kasa/pull/1657) (@ZeliardM) - Add TS15\(US\) device fixture [\#1649](https://github.com/python-kasa/python-kasa/pull/1649) (@ZeliardM) - Add Tapo C460 support [\#1645](https://github.com/python-kasa/python-kasa/pull/1645) (@markvanpraet) - Add P105\(US\) device fixture [\#1644](https://github.com/python-kasa/python-kasa/pull/1644) (@ZeliardM) - Add L430C\(EU\) device fixture [\#1643](https://github.com/python-kasa/python-kasa/pull/1643) (@ZeliardM) - Add L430P\(EU\) device fixture [\#1607](https://github.com/python-kasa/python-kasa/pull/1607) (@LostLuma) - Add S500\(US\)\_1.0\_1.2.0 fixture [\#1569](https://github.com/python-kasa/python-kasa/pull/1569) (@ZeliardM) - Add device fixture for P316M\(US\) [\#1568](https://github.com/python-kasa/python-kasa/pull/1568) (@TheLinuxGuy) - Add L535E\(EU\) 3.0 1.1.8 fixture [\#1545](https://github.com/python-kasa/python-kasa/pull/1545) (@fantandrea) - Adding KL400L10\(US\)\_1.0\_1.0.10 fixture [\#1539](https://github.com/python-kasa/python-kasa/pull/1539) (@mjbohr) - Add TP10\(IT\) 1.0 1.2.5 fixture [\#1538](https://github.com/python-kasa/python-kasa/pull/1538) (@emanueleg) - Add LB100\(US\)\_1.0\_1.8.11 fixture file [\#1515](https://github.com/python-kasa/python-kasa/pull/1515) (@ZeliardM) - Add KS225\(US\)\_1.0\_1.1.1 and L930-5\(EU\)\_1.0\_1.2.5 [\#1509](https://github.com/python-kasa/python-kasa/pull/1509) (@ZeliardM) **Documentation updates:** - How to hash credentials to make use of --credentials-hash flag? [\#1517](https://github.com/python-kasa/python-kasa/issues/1517) - docs: modernize docstrings across the repository [\#1682](https://github.com/python-kasa/python-kasa/pull/1682) (@ZeliardM) - Add a note to emeter guide being kasa-only [\#1512](https://github.com/python-kasa/python-kasa/pull/1512) (@rytilahti) **Project maintenance:** - Fix PyPI publishing for packages with metadata 2.5 [\#1779](https://github.com/python-kasa/python-kasa/pull/1779) (@rytilahti) - tests: add type annotations to top-level test files [\#1688](https://github.com/python-kasa/python-kasa/pull/1688) (@ZeliardM) - tests: add type annotations to CLI, protocol, and smartcam tests [\#1687](https://github.com/python-kasa/python-kasa/pull/1687) (@ZeliardM) - tests: add type annotations to Smart tests [\#1686](https://github.com/python-kasa/python-kasa/pull/1686) (@ZeliardM) - tests: add type annotations to IoT tests [\#1685](https://github.com/python-kasa/python-kasa/pull/1685) (@ZeliardM) - tests: add type annotations to transport tests [\#1684](https://github.com/python-kasa/python-kasa/pull/1684) (@ZeliardM) - tests: centralize transport and session cleanup in conftest [\#1683](https://github.com/python-kasa/python-kasa/pull/1683) (@ZeliardM) - ci: pin all GitHub Actions to SHA hashes and update versions [\#1681](https://github.com/python-kasa/python-kasa/pull/1681) (@ZeliardM) - tests: fix typos, child device subtype, CLI patch path, and deprecation test logic [\#1677](https://github.com/python-kasa/python-kasa/pull/1677) (@ZeliardM) - Update GitHub Workflows and Actions [\#1622](https://github.com/python-kasa/python-kasa/pull/1622) (@ZeliardM) - Use log-level debug for smartdevice query error reporting [\#1587](https://github.com/python-kasa/python-kasa/pull/1587) (@rytilahti) - Use Device instead of SmartDevice where feasible [\#1585](https://github.com/python-kasa/python-kasa/pull/1585) (@ZeliardM) **Closed issues:** - Python 3.14 Support [\#1597](https://github.com/python-kasa/python-kasa/issues/1597) - HS300 Child State - Time Module Error [\#1445](https://github.com/python-kasa/python-kasa/issues/1445) 0.11.0.1	2026-10-04 18:38:57 +00:00
Teemu R.	9b6d6aff21	Fix PyPI publishing for packages with metadata 2.5 (#1779) ... The 0.11.0 release failed to upload to PyPI as hatchling version used in the CI created metadata that was not accepted by pypi. This commit pins the versions for the release pipeline to avoid such surprises in the future.	2026-10-04 18:26:26 +00:00
Teemu R.	5b8447c940	Prepare 0.11.0 (#1776) ... ## [0.11.0](https://github.com/python-kasa/python-kasa/tree/0.11.0) (2026-10-04) [Full Changelog](https://github.com/python-kasa/python-kasa/compare/0.10.2...0.11.0) **Release summary:** This is a huge and long overdue release, coming more than a year and a half after the previous one. Hopefully the next one follows sooner, as the TPAP transport (which did not make it into this release) is used more and more on newer devices. This release brings broader camera support, new modules for lights, vacuums and cameras, and many connectivity fixes for newer firmware versions. Some other highlights: - Improved Tapo camera support: login version 3, presets, wifi handling, last alert detection, and more robust authentication and discovery. - Selective room cleaning for robot vacuums. - Configurable light strip length via the new strip segment module, and an exposed light transition state change flag. - Basic HomeKit module for Kasa (iot) devices. - Energy monitoring V2 support (S515D). - Better hub and thermostat state reporting (hold, summer mode, low battery). - Connection fixes for newer Tapo firmware and older SSL devices, plus KLAP v2 for iot devices. - More resilient time handling, with failover and UTC fallback for iot devices. - Python 3.14 is now supported. - Inclusion of fixtures for 29 devices or firmware versions, including the Tapo C460, C200 and C101 cameras and the KH100 hub with KE100/KE110 thermostats. **Thank you to all contributors!** A big thank you to everyone who contributed to this release, whether through code, device fixtures, bug reports or testing. Special thanks to @ZeliardM for a huge effort on both features and project maintenance, including but not limited to: - Features like the HomeKit module for iot devices, iot time module failover, wifi handling and credential improvements for cameras, Tapo login version 3, and V2 energy monitoring for S515D. - A lot of necessary maintenance work including type annotations and cleanups throughout the test suite, modernized docstrings, CI hardening with SHA-pinned actions, and many bug fixes. This helps us to keep the library maintainable and open to new contributions. A warm welcome to our new contributors, with special thanks to those who contributed improvements and fixes: - @alams154: discovery on port 20004 - @bluntman001: iot device classification fix - @bm1549: KLAP v2 transport for iot devices - @darylldelfin: cipher support for newer Tapo firmware - @davidefiocco: vacuum mop water level fix - @epg-pers: selective room cleaning for vacuums - @freeKC: camera discovery and authentication fixes - @gpongelli: extended camera detection - @Ikstar: KL420 color temperature range - @juherr: last alert detection module for cameras, camera error codes and a C200 fixture - @kad: SSL connections to older devices - @KaloyanNaumov: multi-request timeout handling - @loganrosen: KL400L5 color temperature range - @markvanpraet: Tapo C460 support and camera battery fix - @monteccarlos: iot timezone mapping fix - @mrwogu: preset support for Tapo cameras - @nopoz: strip segment module, light transition flag and credentials hash fix - @tk1475: UTC fallback for unset iot device clocks - @wh1t3f1r3: non-retryable network error handling Thanks also to our new contributors who provided device fixtures to help future development efforts: @emanueleg, @fantandrea, @HarryPehkonen, @ijaron, @Krotu, @LostLuma, @mjbohr and @TheLinuxGuy. **This release in numbers:** - 68 merged pull requests from 29 contributors, 27 of them first-time contributors - 8 new modules - 29 new device fixtures - 203 files changed, with 25,199 lines added and 2,585 removed **Implemented enhancements:** - \[Feature Request\] C220 camera line crossing detection on-off switch [\#1551](https://github.com/python-kasa/python-kasa/issues/1551) - SslAesTransport: handshake again when a camera answers 401 to passthrough [\#1771](https://github.com/python-kasa/python-kasa/pull/1771) (@freeKC) - Add LastAlertDetection module for smartcam devices [\#1762](https://github.com/python-kasa/python-kasa/pull/1762) (@juherr) - Add KL420 to TPLINK\_KELVIN color temperature ranges [\#1757](https://github.com/python-kasa/python-kasa/pull/1757) (@Ikstar) - Do not authenticate with a credentials\_hash from a different transport [\#1749](https://github.com/python-kasa/python-kasa/pull/1749) (@nopoz) - Expose the light transition state change flag [\#1745](https://github.com/python-kasa/python-kasa/pull/1745) (@nopoz) - Add strip segment module for configurable light strip length [\#1744](https://github.com/python-kasa/python-kasa/pull/1744) (@nopoz) - Add KL400L5 color temperature range [\#1719](https://github.com/python-kasa/python-kasa/pull/1719) (@loganrosen) - Update smartcam credential handling and tests [\#1664](https://github.com/python-kasa/python-kasa/pull/1664) (@ZeliardM) - Add support for V2 Energy Monitoring for S515D [\#1663](https://github.com/python-kasa/python-kasa/pull/1663) (@ZeliardM) - Add selective room cleaning to vacuum clean module [\#1660](https://github.com/python-kasa/python-kasa/pull/1660) (@epg-pers) - New Wi-Fi handling for SMARTCAM devices [\#1639](https://github.com/python-kasa/python-kasa/pull/1639) (@ZeliardM) - Add support for tapo login\_version 3 in sslaestransport [\#1638](https://github.com/python-kasa/python-kasa/pull/1638) (@ZeliardM) - Add preset support for Tapo cameras [\#1615](https://github.com/python-kasa/python-kasa/pull/1615) (@mrwogu) - Add python 3.14 to supported versions [\#1599](https://github.com/python-kasa/python-kasa/pull/1599) (@rytilahti) - Add discovery port 20004 [\#1595](https://github.com/python-kasa/python-kasa/pull/1595) (@alams154) - Implement IOT Time Module Failover [\#1583](https://github.com/python-kasa/python-kasa/pull/1583) (@ZeliardM) - Add bare bones homekit module for iot devices [\#1566](https://github.com/python-kasa/python-kasa/pull/1566) (@ZeliardM) - Extend smartcam detection support [\#1552](https://github.com/python-kasa/python-kasa/pull/1552) (@gpongelli) **Fixed bugs:** - Time module unavailable for waterleak sensor [\#1613](https://github.com/python-kasa/python-kasa/issues/1613) - 'No time zone found with key EST' in debian 13 [\#1579](https://github.com/python-kasa/python-kasa/issues/1579) - Discovery: accept cameras that only send the encrypt\_type list [\#1770](https://github.com/python-kasa/python-kasa/pull/1770) (@freeKC) - Classify IOT devices via sysinfo regardless of transport \(fixes \#1740\) [\#1769](https://github.com/python-kasa/python-kasa/pull/1769) (@bluntman001) - Fall back to UTC for iot time when the device clock is not set [\#1768](https://github.com/python-kasa/python-kasa/pull/1768) (@tk1475) - Add UNKNOWN\_USERNAME \(-60502\) camera error code [\#1761](https://github.com/python-kasa/python-kasa/pull/1761) (@juherr) - Disable multi requests on timeout during multi-request [\#1759](https://github.com/python-kasa/python-kasa/pull/1759) (@KaloyanNaumov) - Add ECDHE-RSA-AES256 cipher for newer Tapo firmware [\#1755](https://github.com/python-kasa/python-kasa/pull/1755) (@darylldelfin) - Map iot timezone index 18 to America/New\_York instead of EST [\#1743](https://github.com/python-kasa/python-kasa/pull/1743) (@monteccarlos) - fix: use KLAP v2 transport for IOT devices with login version 2 [\#1731](https://github.com/python-kasa/python-kasa/pull/1731) (@bm1549) - Add ENETUNREACH to non-retryable errors in XorTransport [\#1668](https://github.com/python-kasa/python-kasa/pull/1668) (@wh1t3f1r3) - Fix mop set\_waterlevel sending setCleanAttr without type field [\#1667](https://github.com/python-kasa/python-kasa/pull/1667) (@davidefiocco) - Fix SMARTCAM Time module and update tests [\#1659](https://github.com/python-kasa/python-kasa/pull/1659) (@ZeliardM) - Fix camera login version in CLI [\#1658](https://github.com/python-kasa/python-kasa/pull/1658) (@ZeliardM) - Allow SSL connections to older devices [\#1654](https://github.com/python-kasa/python-kasa/pull/1654) (@kad) - waterleaksensor: use parent's Time for alert timestamp [\#1614](https://github.com/python-kasa/python-kasa/pull/1614) (@rytilahti) - Add hold state to thermostatstate [\#1609](https://github.com/python-kasa/python-kasa/pull/1609) (@rytilahti) - Fix thermostat idle reporting on low battery [\#1598](https://github.com/python-kasa/python-kasa/pull/1598) (@rytilahti) - Add shutdown \(summer mode\) to thermostatstate [\#1588](https://github.com/python-kasa/python-kasa/pull/1588) (@rytilahti) - Fix iotstrip child device time handling [\#1584](https://github.com/python-kasa/python-kasa/pull/1584) (@ZeliardM) **Added support for devices:** - Add C200 device fixture [\#1760](https://github.com/python-kasa/python-kasa/pull/1760) (@juherr) - Add P125M fixture for firmware 1.4.4 [\#1746](https://github.com/python-kasa/python-kasa/pull/1746) (@HarryPehkonen) - Add fixtures for KH100, KE100 and KE110 and simulate TRV states [\#1726](https://github.com/python-kasa/python-kasa/pull/1726) (@Krotu) - Add L530EA\(EU\) device fixture [\#1694](https://github.com/python-kasa/python-kasa/pull/1694) (@ZeliardM) - Add C101 test fixture [\#1673](https://github.com/python-kasa/python-kasa/pull/1673) (@ijaron) - Add LB130\(US\) device fixture [\#1669](https://github.com/python-kasa/python-kasa/pull/1669) (@ZeliardM) - Add KL110B\(UN\) device fixture [\#1657](https://github.com/python-kasa/python-kasa/pull/1657) (@ZeliardM) - Add TS15\(US\) device fixture [\#1649](https://github.com/python-kasa/python-kasa/pull/1649) (@ZeliardM) - Add Tapo C460 support [\#1645](https://github.com/python-kasa/python-kasa/pull/1645) (@markvanpraet) - Add P105\(US\) device fixture [\#1644](https://github.com/python-kasa/python-kasa/pull/1644) (@ZeliardM) - Add L430C\(EU\) device fixture [\#1643](https://github.com/python-kasa/python-kasa/pull/1643) (@ZeliardM) - Add L430P\(EU\) device fixture [\#1607](https://github.com/python-kasa/python-kasa/pull/1607) (@LostLuma) - Add S500\(US\)\_1.0\_1.2.0 fixture [\#1569](https://github.com/python-kasa/python-kasa/pull/1569) (@ZeliardM) - Add device fixture for P316M\(US\) [\#1568](https://github.com/python-kasa/python-kasa/pull/1568) (@TheLinuxGuy) - Add L535E\(EU\) 3.0 1.1.8 fixture [\#1545](https://github.com/python-kasa/python-kasa/pull/1545) (@fantandrea) - Adding KL400L10\(US\)\_1.0\_1.0.10 fixture [\#1539](https://github.com/python-kasa/python-kasa/pull/1539) (@mjbohr) - Add TP10\(IT\) 1.0 1.2.5 fixture [\#1538](https://github.com/python-kasa/python-kasa/pull/1538) (@emanueleg) - Add LB100\(US\)\_1.0\_1.8.11 fixture file [\#1515](https://github.com/python-kasa/python-kasa/pull/1515) (@ZeliardM) - Add KS225\(US\)\_1.0\_1.1.1 and L930-5\(EU\)\_1.0\_1.2.5 [\#1509](https://github.com/python-kasa/python-kasa/pull/1509) (@ZeliardM) **Documentation updates:** - How to hash credentials to make use of --credentials-hash flag? [\#1517](https://github.com/python-kasa/python-kasa/issues/1517) - docs: modernize docstrings across the repository [\#1682](https://github.com/python-kasa/python-kasa/pull/1682) (@ZeliardM) - Add a note to emeter guide being kasa-only [\#1512](https://github.com/python-kasa/python-kasa/pull/1512) (@rytilahti) **Project maintenance:** - tests: add type annotations to top-level test files [\#1688](https://github.com/python-kasa/python-kasa/pull/1688) (@ZeliardM) - tests: add type annotations to CLI, protocol, and smartcam tests [\#1687](https://github.com/python-kasa/python-kasa/pull/1687) (@ZeliardM) - tests: add type annotations to Smart tests [\#1686](https://github.com/python-kasa/python-kasa/pull/1686) (@ZeliardM) - tests: add type annotations to IoT tests [\#1685](https://github.com/python-kasa/python-kasa/pull/1685) (@ZeliardM) - tests: add type annotations to transport tests [\#1684](https://github.com/python-kasa/python-kasa/pull/1684) (@ZeliardM) - tests: centralize transport and session cleanup in conftest [\#1683](https://github.com/python-kasa/python-kasa/pull/1683) (@ZeliardM) - ci: pin all GitHub Actions to SHA hashes and update versions [\#1681](https://github.com/python-kasa/python-kasa/pull/1681) (@ZeliardM) - tests: fix typos, child device subtype, CLI patch path, and deprecation test logic [\#1677](https://github.com/python-kasa/python-kasa/pull/1677) (@ZeliardM) - Update GitHub Workflows and Actions [\#1622](https://github.com/python-kasa/python-kasa/pull/1622) (@ZeliardM) - Use log-level debug for smartdevice query error reporting [\#1587](https://github.com/python-kasa/python-kasa/pull/1587) (@rytilahti) - Use Device instead of SmartDevice where feasible [\#1585](https://github.com/python-kasa/python-kasa/pull/1585) (@ZeliardM) **Closed issues:** - Python 3.14 Support [\#1597](https://github.com/python-kasa/python-kasa/issues/1597) - HS300 Child State - Time Module Error [\#1445](https://github.com/python-kasa/python-kasa/issues/1445)	2026-10-04 20:03:52 +02:00
Krotu	d916a49668	Add fixtures for KH100, KE100 and KE110 and simulate TRV states (#1726) ... This PR adds fixture files for: - KH100 (UK), hardware 1.0, firmware 1.7.5 - KE100 (UK), hardware 1.0, firmware 2.15.0 - KE110 (EU), hardware 1.0, firmware 1.4.0 The fixtures were collected from physical devices and anonymized for use in development and testing. The KE110 fixture is a new device model and has been added to the appropriate fixture category. This also improves test suite by adding TRV state simulation to allow tests pass on fixtures that report a non-heating state. --------- Co-authored-by: Teemu Rytilahti <tpr@iki.fi>	2026-10-04 15:09:21 +00:00
ZeliardM	99716fc3b9	Update smartcam credential handling and tests (#1664) ... This PR adds update_admin_password in the library and CLI for SMARTCAM devices. It also updates the update_credentials function to correctly handle the local_account for local device authentication. It updates all of the required tests and code coverage as well.	2026-10-04 16:58:14 +02:00
ZeliardM	b36c795cbc	tests: add type annotations to top-level test files (#1688) ... Add type annotations (parameter types and `-> None` return types) to all top-level test functions across 22 test files. This enables mypy to check test function bodies, catching type errors that were previously hidden.	2026-10-04 14:36:01 +00:00
Kaloyan Naumov	eed64fe013	Disable multi requests on timeout during multi-request (#1759) ... _execute_multiple_query only disables batching on JSON_DECODE_FAIL_ERROR / INTERNAL_UNKNOWN_ERROR (#1025). This change applies the same pattern to a TimeoutError raised while sending a batch: set the batch size to 1 and raise _RetryableError. --------- Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-10-04 16:19:05 +02:00
nopoz	effdf5a298	Expose the light transition state change flag (#1745) ... Bulbs and light strips can fade smoothly when their brightness or colour changes, instead of snapping straight to the new value. The Tapo app exposes this as "Smooth Transition". python-kasa cannot read or change it today, so the setting is missing from Home Assistant even though the device supports it. This adds support for this feature as a switch: - read `change_state` in `_post_update_hook` - add a `change_transition` property and `set_change_transition()` - register a `smooth_transition_change` switch feature when the device reports the flag	2026-10-04 16:01:50 +02:00
nopoz	dc0745ad93	Add strip segment module for configurable light strip length (#1744) ... A light strip can be cut shorter than it ships, and the device has to be told how much of it is actually there so effects and colours span the right distance. The Tapo app exposes this as "Light Strip Length". python-kasa has no way to read or change it, so the setting is missing from Home Assistant. This change exposes a new feature backed by `segment` component: - add a `Segment` module: `REQUIRED_COMPONENT = "segment"`, `QUERY_GETTER_NAME = "get_device_segment"` - expose one Number feature, `strip_segments`, range 0-50, `Category.Config` - add a `segments` property and `set_segments()`, which writes `set_device_segment`	2026-10-04 15:56:51 +02:00
Ahmed Hassan	9030179aad	Fall back to UTC for iot time when the device clock is not set (#1768) ... A new or factory-reset iot device can report a clock far in the past, e.g. year 2000, which causes a failure in timezone autodetection logic as the difference can be in years. This causes `update()` to fail, so every cli command fails, including `wifi scan` and `wifi join`, which are the commands needed to provision the device. To fix this, this changes the logic fall back to UTC if the device clock is not set, detected by checking if the timedelta is too large. Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>	2026-10-04 15:52:54 +02:00
bluntman001	b2a15afa7e	Classify IOT devices via sysinfo regardless of transport (fixes #1740) (#1769) ... Drop the `XorTransport` guard and always query sysinfo for `IotProtocol` connections, so `get_device_class_from_sys_info` sees `dev_name` (\"Wi-Fi Smart Dimmer\", etc.) and picks the right class to initialize. This is necessary, as some IOT-speaking devices have moved to use KLAP instead of XOR as their transport, which in turn caused devices like dimmers to be detected incorrectly as plugs. --------- Co-authored-by: bluntman001 <noreply@github.com> Co-authored-by: Teemu Rytilahti <tpr@iki.fi>	2026-10-04 15:48:22 +02:00
nopoz	53823ea9a5	Do not authenticate with a credentials_hash from a different transport (#1749) ... A `credentials_hash` is specific to the transport that produced it, but nothing checked that the hash a transport was handed was its own. This matters because a device can change its encryption type without the credentials changing. For example, toggling **Third-Party Compatibility** in the Tapo app moves a plug or strip between TPAP and KLAP, and firmware updates are known to introduce new transports. This introduces a per-transport check that the hash has the shape that transport produces, and treats a foreign hash as absent rather than as a bad password. This makes the failure honest but still ends in a reauth. This also changes how credentials are read back out when the hash is one of the plaintext forms and lets the transport derive its own, so the change of encryption type needs no reauth in all cases.	2026-10-04 15:30:01 +02:00
FreeKC	b0d77b35a2	SslAesTransport: handshake again when a camera answers 401 to passthrough (#1771) ... Some cameras (C220 and C100 on the 1.4.4 line in those reports) drop the session about every ten minutes and answer the next `securePassthrough` with HTTP 401 and `-40421` in the body. With this change a 401 on passthrough marks the transport as needing a handshake and raises `_RetryableError`, so the protocol logs in again and retries the same request. --------- Co-authored-by: freeKC <7538438+freeKC@users.noreply.github.com>	2026-10-03 18:19:40 +02:00
Brian Marks	998ebe79e8	fix: use KLAP v2 transport for IOT devices with login version 2 (#1731) ... Some IOT-family devices keep the legacy IOT command set after a firmware update but upgrade their KLAP authentication to login version 2 (sha256 hashing). This change selects `KlapTransportV2` for `IOT.KLAP` devices that advertise `login_version >= 2`, matching the transport already used for `SMART.KLAP`. Devices with login version 1 (or unset) are unchanged and continue to use the v1 `KlapTransport`. Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com>	2026-09-30 19:33:30 +02:00
FreeKC	9d84bb74e7	Discovery: accept cameras that only send the encrypt_type list (#1770) ... The C460 on firmware 1.2.2 answers the UDP discovery with `mgt_encrypt_schm: {"is_support_https": true}` and `encrypt_type: ["3"]`, but no `encrypt_type` inside the scheme and no `encrypt_info`. `_get_connection_parameters` only looks at those two places for the encryption type, so the camera ends up as "Unsupported device ... with no encryption type" even though it works with the same AES login as every other camera. This uses the top level list as a last resort: when nothing else names the encryption type, the device supports https and the list says 3, treat it as AES. Co-authored-by: freeKC <7538438+freeKC@users.noreply.github.com>	2026-09-30 00:40:39 +02:00
Julien Herr	b7b41f2c81	Add LastAlertDetection module for smartcam devices (#1762) ... Add a `LastAlertDetection` module for SMARTCAM devices exposing `getLastAlarmInfo` as two `Info` sensor features: - `last_alert_timestamp` — tz-aware `datetime` of the last alert, `None` when the device has never detected anything (`last_alarm_time` is `""` or `"0"` on such devices, and an unexpected value is also mapped to `None` - `last_alert_type` — `LastAlertType` enum (`Motion`; `Unknown` fallback with a one-time warning per unknown raw value), `None` when unset.	2026-09-18 18:05:48 +02:00
Julien Herr	454e2697dc	Add UNKNOWN_USERNAME (-60502) camera error code (#1761)	2026-09-18 17:17:42 +02:00
monteccarlos	4c2ef506bd	Map iot timezone index 18 to America/New_York instead of EST (#1743) ... Iot firmware timezone index 18 corresponds to "(UTC-05:00) Eastern Time (US & Canada)", which observes daylight saving time. Previously, this was mapped to a fixed UTC-5 (EST= causing one hour off for New York local times. Co-authored-by: monteccarlos <vld@noise.xyz> Co-authored-by: Claude Fable 5 <noreply@anthropic.com>	2026-09-18 16:36:33 +02:00
Harri Pehkonen	59c47fbe91	Add P125M fixture for firmware 1.4.4 (#1746) ... Adds a device fixture for the **Tapo P125M** on firmware **1.4.4 Build 260521 Rel.100818** (US). The existing P125M fixture covers firmware 1.1.0 (Build 231009). This newer firmware: - reports **matter component v3** (vs v2 in the old fixture) - adds the **`get_matter_setup_info`** module (Matter setup code/payload) --------- Co-authored-by: Harry Pehkonen <harrypehkonen@users.noreply.github.com>	2026-09-18 15:57:42 +02:00
Julien Herr	a1f3c0c671	Add C200 device fixture (#1760)	2026-09-18 15:41:28 +02:00
Peter Arapov	7164ef7a66	Add KL420 to TPLINK_KELVIN color temperature ranges (#1757) ... Adds the `KL420` series to `TPLINK_KELVIN` to support wider color temperature ranges (2500-9000K as supported by the device). While older firmware (1.0.2) reported is_variable_color_temp: 0, firmware 1.0.7 enables variable color temperature support.	2026-09-18 15:38:08 +02:00
darylldelfin	0e3640c303	Add ECDHE-RSA-AES256 cipher for newer Tapo firmware (#1755) ... Add ECDHE-RSA-AES256-GCM-SHA384 alongside the existing ECDHE-RSA-AES128-GCM-SHA256 suite for newer Tapo firmware, while keeping all legacy suites for backward compatibility. Tested with Tapo TC70, C530WS, and C210 cameras after firmware updates produced TLS handshake failures.	2026-09-18 15:34:59 +02:00
Logan Rosen	a29d0610ba	Add KL400L5 color temperature range (#1719) ... - add the KL400L5 color temperature range used by newer firmware - add a KL400L5(US) 1.0.11 fixture that reports variable color temperature support - categorize that fixture as variable color temperature while keeping older KL400L5 fixtures non-variable - The Tapo app exposes 2500K-9000K for these KL400L5 strips, so this PR uses that app-visible range. --------- Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>	2026-07-18 16:02:57 +02:00
epg-pers	aba457a729	Add selective room cleaning to vacuum clean module (#1660) ... Adds support for selective room cleaning to the existing `Clean` module. Co-authored-by: davidefiocco <davidefiocco@users.noreply.github.com>	2026-07-11 15:02:21 +02:00
ZeliardM	202b80e9b3	Add support for V2 Energy Monitoring for S515D (#1663) ... Add support for S515D and other Energy Monitoring V2 devices that report current power via get_energy_usage instead of get_current_power, with fixture coverage and fallback tests.	2026-07-10 21:21:18 -04:00
ZeliardM	b2206841dd	Fix SMARTCAM Time module and update tests (#1659) ... Update SmartCam time handling to apply timezone-only changes with explicit warnings, while keeping common time and CLI tests focused on devices that support setting clock time and adding SmartCam-specific coverage for the special behavior.	2026-07-10 20:38:12 -04:00
ZeliardM	8c66d0a29d	tests: add type annotations to transport tests (#1684) ... type annotations and parameter type annotations to all test functions and helper functions across the 5 transport test files. This enables mypy to check function bodies, catching type errors that were previously hidden.	2026-07-10 15:51:46 +02:00
ZeliardM	88e1c27bd0	tests: add type annotations to Smart tests (#1686) ... Add type annotations across all 'smart' tests, enabling mypy to check test function bodies, catching type errors that were previously hidden.	2026-07-08 00:11:59 +02:00
Teemu R.	8840fc395e	Add python 3.14 to supported versions (#1599) ... * Add python 3.14 to our supported versions and to our CI * Convert to use pyproject.toml standard dependency groups * Fix any issues reported by CI	2026-07-07 20:46:57 +02:00
ZeliardM	531be8437a	ci: pin all GitHub Actions to SHA hashes and update versions (#1681) ... Update action versions and pin to full SHA commit hashes. Windows build parallelization is disabled to avoid hung CI.	2026-07-06 23:27:19 +02:00
ZeliardM	2efdb7b41d	Add L530EA(EU) device fixture (#1694)	2026-07-05 19:23:28 +02:00
ZeliardM	1a84242a05	tests: add type annotations to CLI, protocol, and smartcam tests (#1687) ... Add type annotations (`-> None` return types and parameter types) to test files in the `tests/cli/`, `tests/protocols/`, and `tests/smartcam/` directories. This enables mypy to check test function bodies, catching type errors that were previously hidden.	2026-07-05 18:46:01 +02:00
ZeliardM	da2588291d	tests: add type annotations to IoT tests (#1685) ... Add type annotations to all test functions across 8 files in `tests/iot/`, improving type safety and enabling mypy to check function bodies.	2026-07-05 18:31:48 +02:00
ZeliardM	bb27a43027	docs: modernize docstrings across the repository (#1682) ... Comprehensive docstring cleanup across the repository — fix Sphinx cross-references, Python REPL continuation syntax, stale class names, and modernize the IotBulb docstring to use the `Module.Light`/`Module.LightPreset` interface.	2026-07-05 18:30:01 +02:00
ZeliardM	7f10a39655	tests: centralize transport and session cleanup in conftest (#1683)	2026-07-05 18:27:25 +02:00
ZeliardM	440f1f453b	tests: fix typos, child device subtype, CLI patch path, and deprecation test logic (#1677)	2026-07-05 18:16:41 +02:00
ZeliardM	76d9f68547	Add LB130(US) device fixture (#1669)	2026-04-05 21:19:25 +02:00
ijaron	3aedc87c28	Add C101 test fixture (#1673)	2026-04-05 21:16:58 +02:00
wh1t3f1r3	99fca940cf	Add ENETUNREACH to non-retryable errors in XorTransport (#1668) ... `ENETUNREACH` is semantically equivalent to `EHOSTUNREACH` (which is already in `_NO_RETRY_ERRORS`) — both indicate the destination cannot be reached at the network layer. Retrying immediately will not resolve the condition. In containerized environments (e.g., Home Assistant running in Docker with bridge networking), a single ICMP "Network unreachable" response can temporarily poison the container's routing cache. The unnecessary retries reinforce the poisoned cache entry, causing cascading failures for other devices on the same subnet.	2026-03-02 22:03:46 +01:00
Davide Fiocco	be5ce08f45	Fix mop set_waterlevel sending setCleanAttr without type field (#1667)	2026-03-01 23:36:49 +01:00
ZeliardM	c9c80619d7	Fix camera login version in CLI (#1658) ... Fix handling of --login-version/-lv for the CLI with --type "camera".	2026-02-27 00:46:11 +01:00
ZeliardM	932f3e21e0	Implement IOT Time Module Failover (#1583) ... Adds a failover in the IOT Time Module to handle issues where the system default time zone files don't have the correct time zone info.	2026-02-22 19:57:23 +01:00
ZeliardM	eefbf9ec1c	Add support for tapo login_version 3 in sslaestransport (#1638) ... Updates to get_default_credentials and DEFAULT_CREDENTIALS for handling a new default password for encryption_type 3 in TAPOCAMERA devices that use encryption_type 3. This adds support for devices like TC40.	2026-02-22 19:56:26 +01:00
ZeliardM	30a8fd45a8	New Wi-Fi handling for SMARTCAM devices (#1639) ... Updated scanning and joining Wi-Fi for SMARTCAM devices that may use a newer connection process.	2026-02-22 00:03:52 +01:00
ZeliardM	494db73fa8	Update GitHub Workflows and Actions (#1622) ... This PR is to update the GitHub Workflows and Actions to resolve residual warnings and errors and using the latest versions available.	2026-02-21 22:09:57 +01:00
Mark Van Praet	ade64c64af	Add Tapo C460 support (#1645) ... Changes include: - New smartcam fixture for C460 - Battery module updates to safely handle optional temperature and voltage fields	2026-02-21 16:20:01 +01:00
Wojciech Guziak	55f9959777	Add preset support for Tapo cameras (#1615)	2026-02-21 16:11:28 +01:00
Alexander D. Kanevskiy	b22917a888	Allow SSL connections to older devices (#1654) ... With recent firmware updates for older devices (like C120) the embedded SSL certificate on the deivce is RSA 1024 type, which is considered insecure nowadays. 0 s:CN=TPRI-DEVICE, O=TPRI, C=US i:CN=TPRI-DEVICE, O=TPRI, C=US a:PKEY: RSA, 1024 (bit); sigalg: sha256WithRSAEncryption v:NotBefore: Jan 1 00:00:00 2001 GMT; NotAfter: Dec 31 23:59:59 2070 GMT This fix add cipher used by TP-Link to list of allowed ones. Related: https://github.com/home-assistant/core/issues/162498 Signed-off-by: Alexander D. Kanevskiy <kad@kad.name>	2026-02-21 15:04:55 +01:00
ZeliardM	a8e398403c	Add KL110B(UN) device fixture (#1657)	2026-02-21 15:01:08 +01:00
ZeliardM	122849f784	Add L430C(EU) device fixture (#1643)	2026-01-26 21:14:53 +00:00