Different devices and different firmwares report overheated status in
different ways.
Some devices indicate support for `overheat_protect` component, but
there are devices that report `overheat_status` even when it is not
listed.
Some other devices use `overheated` boolean that was already previously
supported, but this PR adds support for much more devices that use
`overheat_status` for reporting.
The "overheated" feature is moved into its own module, and uses either
of the ways to report this information.
This will also rename `REQUIRED_KEY_ON_PARENT` to `SYSINFO_LOOKUP_KEYS`
and change its logic to check if any of the keys in the list are found
in the sysinfo.
```
tpr@lumipyry ~/c/p/tests (fix/overheated)> ag 'overheat_protect' -c|wc -l
15
tpr@lumipyry ~/c/p/tests (fix/overheated)> ag 'overheated' -c|wc -l
38
tpr@lumipyry ~/c/p/tests (fix/overheated)> ag 'overheat_status' -c|wc -l
20
```
---------
Co-authored-by: Steven B. <51370195+sdb9696@users.noreply.github.com>
This PR changes the behavior of `brightness` module if an effect is
active.
Currently, changing the brightness disables the effect when the
brightness is changed, this fixes that.
This will also improve the `set_effect` interface to use the current
brightness when an effect is activated.
* light_strip_effect: passing `bAdjusted` with the changed properties
changes the brightness.
* light_effect: the brightness is stored only in the rule, so we modify
it when adjusting the brightness. This is also done during the initial
effect activation.
---------
Co-authored-by: Steven B <51370195+sdb9696@users.noreply.github.com>
Adds light preset common module for switching to presets and saving presets.
Deprecates the `presets` attribute and `save_preset` method from the `bulb`
interface in favour of the modular approach. Allows setting preset for `iot`
which was not previously supported.
Implements the `light_strip_lighting_effect` components for
`smart` devices. Uses a new list of effects captured from a L900 which
are similar to the `iot` effects but include some additional properties
and a few extra effects.
Assumes that a device only implements `light_strip_lighting_effect` or
`light_effect` but not both.
Address the inconsistent naming of smart modules by removing all "Module" suffixes and aligning filenames with class names. Removes the casting of modules to the correct module type now that is is redundant. Update the adding of iot modules to use the ModuleName class rather than a free string.
Support the `light_effect` module which allows setting the effect to Off
or Party or Relax. Uses the new `Feature.Type.Choice`. Does not
currently allow editing of effects.
This improves the temperature control features to allow implementing
climate platform support for homeassistant.
Also adds frostprotection module, which is also used to turn
the thermostat on and off.
Also updates CI pypy versions to be 3.9 and 3.10 which are the currently
[supported
versions](https://www.pypy.org/posts/2024/01/pypy-v7315-release.html).
Otherwise latest cryptography doesn't ship with pypy3.8 wheels and is
unable to build on windows.
Also updates the `codecov-action` to v4 which fixed some intermittent
uploading errors.
Allow controlling the color temperature via features interface:
```
$ kasa --host 192.168.xx.xx feature color_temperature
Color temperature (color_temperature): 0
$ kasa --host 192.168.xx.xx feature color_temperature 2000
Setting color_temperature to 2000
Raised error: Temperature should be between 2500 and 6500, was 2000
Run with --debug enabled to see stacktrace
$ kasa --host 192.168.xx.xx feature color_temperature 3000
Setting color_temperature to 3000
$ kasa --host 192.168.xx.xx feature color_temperature
Color temperature (color_temperature): 3000
```
Adds initial support for H100 and its alarmmodule.
Also implements the following modules for T315:
* reportmodule (reporting interval)
* battery
* humidity
* temperature
Adds auto-off implementation. The feature stays enabled after the timer runs out, and it will start the countdown if the device is turned on again without explicitly disabling it.
New features:
* Switch to select if enabled: `Auto off enabled (auto_off_enabled): False`
* Setting to change the delay: `Auto off minutes (auto_off_minutes): 222`
* If timer is active, datetime object when the device gets turned off: `Auto off at (auto_off_at): None`
The initial steps to modularize the smartdevice. Modules are initialized based on the component negotiation, and each module can indicate which features it supports and which queries should be run during the update cycle.
