1007 Commits

This Branch

This Branch

All Branches

Author	SHA1	Message	Date
Steven B.	8418ba3eef	Treat smartcam 500 errors after handshake as retryable (#1395) ... `smartcam` devices can respond with 500 if another session is created from the same host	2024-12-20 19:23:18 +00:00
Steven B.	93ca3ad2e1	Handle smartcam device blocked response (#1393) ... Devices that have failed authentication multiple times due to bad credentials go into a blocked state for 30 mins. Handle that as a different error type instead of treating it as a normal `AuthenticationError`.	2024-12-20 14:55:15 +00:00
Steven B.	296af3192e	Handle KeyboardInterrupts in the cli better (#1391) ... Addresses an issue with how `asyncclick` deals with `KeyboardInterrupt` errors. Instead of the `click.main` receiving `KeyboardInterrupt` it receives `CancelledError` because it's a task running inside the loop. Also ensures that discovery catches the `CancelledError` and closes the http clients.	2024-12-20 14:21:38 +01:00
Teemu R.	fe88b52e19	Fallback to other module data on get_energy_usage errors (#1245) ... - The `get_energy_usage` query can fail if the device time is not set because the response includes the device time. - Make `get_energy_usage` an optional query response so the energy module can fall back to getting the power from `get_emeter_data` or `get_current_power` on error. - Devices on `energy_monitoring` version 1 still fail as they have no additional queries to fall back to.	2024-12-20 08:53:07 +00:00
Steven B.	83eb73cc7f	Add rssi and signal_level to smartcam (#1392)	2024-12-20 06:16:18 +00:00
Steven B.	d890b0a3ac	Add smartcam detection modules (#1389) ... - Motion detection - Person detection - Tamper detection - Baby Cry Detection	2024-12-20 00:22:08 +01:00
Steven B.	b5f49a3c8a	Fix lens mask required component and state (#1386) ... Fixes a few issues with the lens mask since migrating it into its own module: - The module didn't provide itself as the container and hence the feature was accessing the same properties on the device. - `enabled` getter on the module incorrect but not picked up due to the previous issue. - No `REQUIRED_COMPONENT` set to ensure the module only created if available. Also changes attribute names to `enabled` from `state` to avoid confusion with device states.	2024-12-19 14:52:25 +01:00
Steven B.	b78e09caa0	Add TC70 3.0 1.3.11 fixture (#1390) ... Many thanks to @allanbeth for the fixture!	2024-12-19 14:48:03 +01:00
Steven B.	47934dbf96	Add C325WB(EU) 1.0 1.1.17 Fixture (#1379)	2024-12-18 11:43:20 +00:00
Steven B.	ba273f308e	Add LensMask module to smartcam (#1385) ... Ensures no error with devices that do not have the `lens_mask` component.	2024-12-17 20:15:42 +00:00
Teemu R.	37ef7b0463	cli: print model, https, and lv for discover list (#1339) ... ``` kasa --target 192.168.xx.xx discover list HOST MODEL DEVICE FAMILY ENCRYPT HTTPS LV ALIAS 192.168.xxx.xxx KP115(EU) IOT.SMARTPLUGSWITCH XOR 0 - Fridge 192.168.xxx.xxx L900-5 SMART.TAPOBULB KLAP 0 2 L900 192.168.xxx.xxx P115 SMART.TAPOPLUG AES 0 2 Nightdesk 192.168.xxx.xxx TC65 SMART.IPCAMERA AES 1 2 Tapo_TC65_B593 ``` Also handles `TimeoutError` and `Exception` during `update()` --------- Co-authored-by: Steven B <51370195+sdb9696@users.noreply.github.com>	2024-12-17 21:09:17 +01:00
Steven B.	14d5629de1	Update C520WS fixture with new methods (#1384)	2024-12-17 10:59:57 +00:00
Steven B.	c6c4490a49	Add C100 4.0 1.3.14 Fixture (#1378)	2024-12-17 10:59:24 +00:00
Steven B.	fe072657b4	Simplify get_protocol to prevent clashes with smartcam and robovac (#1377)	2024-12-17 07:39:17 +00:00
Steven B.	5918e4daa7	Enable saving of fixture files without git clone (#1375) ... Allows `dump_devinfo` to be run without fixture subfolders present from cloned repository	2024-12-16 13:42:42 +00:00
Steven B.	d03a387a74	Add new methods to dump_devinfo (#1373) ... Adds `getMatterSetupInfo`, `getConnectStatus` and `scanApList`	2024-12-16 13:06:26 +00:00
Steven B.	e206d9b4df	Miscellaneous minor fixes to dump_devinfo (#1382) ... Fixes: - Decrypted discovery data saved under `discovery_result` instead of `result` - `smart` child data not redacted - `smartcam` child component list `device_id` not `SCRUBBED`	2024-12-16 13:00:28 +00:00
Steven B.	62345be916	Add timeout parameter to dump_devinfo (#1381)	2024-12-16 13:48:27 +01:00
Steven B.	e9109447a7	Add smartcam modules to package inits (#1376)	2024-12-16 13:20:26 +01:00
Steven B.	031ebcd97f	Update docs for Tapo Lab Third-Party compatibility (#1380)	2024-12-16 13:19:25 +01:00
Steven B.	f8503e4df6	Force single for some smartcam requests (#1374) ... `onboarding` requests do not return the method key and need to be sent as single requests.	2024-12-15 16:03:12 +00:00
Steven B.	c439530f93	Add bare bones homekit modules smart and smartcam devices (#1370)	2024-12-14 13:34:58 +00:00
Steven B.	59e5073509	Update docs for new FeatureAttribute behaviour (#1365) ... Co-authored-by: Teemu R. <tpr@iki.fi>	2024-12-13 22:23:58 +01:00
Steven B.	2ca6d3ebe9	Add bare-bones matter modules to smart and smartcam devices (#1371)	2024-12-13 19:45:38 +00:00
Steven B.	223f3318ea	Use DeviceInfo consistently across devices (#1338) ... - Make model exclude region for `iot` devices. This is consistent with `smart` and `smartcam` devices. - Make region it's own attribute on `Device`. - Ensure that devices consistently use `_get_device_info` static methods for all information relating to device models. - Fix issue with firmware and hardware being the wrong way round for `smartcam` devices.	2024-12-13 12:37:13 +00:00
Teemu R.	5f84c69774	Add homebridge-kasa-python link to README (#1367)	2024-12-12 09:51:45 +00:00
Steven B.	7709bb967f	Update cli, light modules, and docs to use FeatureAttributes (#1364)	2024-12-11 15:53:35 +00:00
Steven B.	f8a46f74cd	Pass raw components to SmartChildDevice init (#1363) ... Clean up and consolidate the processing of raw component query responses and simplify the code paths for creating smartcam child devices when supported.	2024-12-11 14:38:38 +00:00
Steven B.	8cb5c2e180	Update dump_devinfo for raw discovery json and common redactors (#1358) ... This PR does a few related things to dump_devinfo: - Store the raw discovery result in the fixture. - Consolidate redaction logic so it's not duplicated in dump_devinfo. - Update existing fixtures to: - Store raw discovery result under `result` - Use `SCRUBBED_CHILD_DEVICE_ID` everywhere - Have correct values as per the consolidated redactors.	2024-12-11 14:18:44 +01:00
Teemu R.	032cd5d2cc	Improve overheat reporting (#1335) ... Different devices and different firmwares report overheated status in different ways. Some devices indicate support for `overheat_protect` component, but there are devices that report `overheat_status` even when it is not listed. Some other devices use `overheated` boolean that was already previously supported, but this PR adds support for much more devices that use `overheat_status` for reporting. The "overheated" feature is moved into its own module, and uses either of the ways to report this information. This will also rename `REQUIRED_KEY_ON_PARENT` to `SYSINFO_LOOKUP_KEYS` and change its logic to check if any of the keys in the list are found in the sysinfo. ``` tpr@lumipyry ~/c/p/tests (fix/overheated)> ag 'overheat_protect' -c|wc -l 15 tpr@lumipyry ~/c/p/tests (fix/overheated)> ag 'overheated' -c|wc -l 38 tpr@lumipyry ~/c/p/tests (fix/overheated)> ag 'overheat_status' -c|wc -l 20 ``` --------- Co-authored-by: Steven B. <51370195+sdb9696@users.noreply.github.com>	2024-12-11 01:01:36 +01:00
Steven B.	bf8f0adabe	Return raw discovery result in cli discover raw (#1342) ... Add `on_discovered_raw` callback to Discover and adds a cli command `discover raw` which returns the raw json before serializing to a `DiscoveryResult` and attempting to create a device class.	2024-12-10 22:42:14 +00:00
Steven B.	464683e09b	Tweak RELEASING.md instructions for patch releases (#1347)	2024-12-10 22:23:04 +01:00
Steven B.	ed0481918c	Fix line endings in device_fixtures.py (#1361)	2024-12-10 08:37:57 +00:00
ZeliardM	2f87ccd201	Add KS200 (US) IOT Fixture and P115 (US) Smart Fixture (#1355)	2024-12-10 06:14:17 +00:00
Happy-Cadaver	fd74b07e2c	Add C520WS camera fixture (#1352) ... Adding the C520WS fixture file --------- Co-authored-by: Steven B <51370195+sdb9696@users.noreply.github.com>	2024-12-10 00:24:27 +01:00
Puxtril	cb89342be1	Add LinkieTransportV2 and basic IOT.IPCAMERA support (#1270) ... Add LinkieTransportV2 transport used by kasa cameras and a basic implementation for IOT.IPCAMERA (kasacam) devices. --------- Co-authored-by: Zach Price <pricezt@ornl.gov> Co-authored-by: Steven B <51370195+sdb9696@users.noreply.github.com> Co-authored-by: Teemu Rytilahti <tpr@iki.fi>	2024-12-07 00:06:58 +01:00
Steven B.	6d9b4421fe	Merge patch into master (#1346)	2024-12-06 12:01:24 +00:00
Steven B	7b9fe7f693	Merge patch into local master	2024-12-06 11:51:26 +00:00
Steven B.	611cd66266	0.8.1 (#1345) ... ## [0.8.1](https://github.com/python-kasa/python-kasa/tree/0.8.1) (2024-12-06) This patch release fixes some issues with newly supported smartcam devices. [Full Changelog](https://github.com/python-kasa/python-kasa/compare/0.8.0...0.8.1) **Fixed bugs:** - Fix update errors on hubs with unsupported children [\#1344](https://github.com/python-kasa/python-kasa/pull/1344) (@sdb9696) - Fix smartcam missing device id [\#1343](https://github.com/python-kasa/python-kasa/pull/1343) (@sdb9696)	2024-12-06 11:36:51 +00:00
Steven B	5a596dbcc9	Prepare 0.8.1	2024-12-06 11:18:48 +00:00
Steven B.	5465b66dee	Fix update errors on hubs with unsupported children (#1344)	2024-12-06 11:07:28 +00:00
Steven B.	7e8b83edb9	Fix smartcam missing device id (#1343)	2024-12-06 11:07:22 +00:00
Steven B.	be8b7139b8	Fix update errors on hubs with unsupported children (#1344)	2024-12-06 11:01:44 +00:00
Steven B.	1c9ee4d537	Fix smartcam missing device id (#1343)	2024-12-06 09:40:44 +00:00
Steven B.	8814d94989	Provide alternative camera urls (#1316)	2024-12-05 16:49:35 +00:00
Steven B.	4eed945e00	Do not error when accessing smart device_type before update (#1319)	2024-12-05 09:14:45 +00:00
Teemu R.	123ea107b1	Add link to related homeassistant-tapo-control (#1333)	2024-12-02 16:38:20 +01:00
Teemu R.	74b59d7f98	Scrub more vacuum keys (#1328)	2024-12-01 18:07:05 +01:00
Teemu R.	9966c6094a	Add ssltransport for robovacs (#943) ... This PR implements a clear-text, token-based transport protocol seen on RV30 Plus (#937). - Client sends `{"username": "email@example.com", "password": md5(password)}` and gets back a token in the response - Rest of the communications are done with POST at `/app?token=<token>` --------- Co-authored-by: Steven B. <51370195+sdb9696@users.noreply.github.com>	2024-12-01 18:06:48 +01:00
Teemu R.	9a52056522	Remove unnecessary check for python <3.10 (#1326)	2024-11-30 15:35:38 +00:00