[module] update instructions and add dkms.conf

Fixes #148

VERSION

@@ -1 +1 @@
-a12-222-g9378f69653+1
+a12-223-g1492196bbf+1

module/Makefile

@@ -12,4 +12,3 @@ test:	all
 	grep -q '^kvmfr' /proc/modules && sudo rmmod kvmfr || true
 	sudo insmod ./kvmfr.ko
 	sudo chown $(USER) /dev/uio0
-	../client/bin/looking-glass-client -f /dev/uio0 -L 128

module/README.md

@@ -1,7 +1,7 @@
 This kernel module implements a basic interface to the IVSHMEM device for
 LookingGlass when using LookingGlass in VM->VM mode.
 
-## Compiling
+## Compiling (Manual)
 
 Make sure you have your kernel headers installed first, on Debian/Ubuntu use
 the following command.
@@ -10,7 +10,7 @@ the following command.
 
 Then simply run `make` and you're done.
 
-## Usage
+### Loading
 
 This module requires the `uio` module to be loaded first, loading it is as
 simple as:
@@ -18,6 +18,21 @@ simple as:
     modprobe uio
     insmod kvmfr.ko
 
+## Compiling & Installing (DKMS)
+
+You can install this module into DKMS so that it persists across kernel
+upgrades. Simply run:
+
+    dkms install .
+
+### Loading 
+
+Simply modprobe the module:
+
+    modprobe kvmfr
+
+## Usage
+
 This will create the `/dev/uio0` node that represents the KVMFR interface.
 To use the interface you need permission to access it by either creating a
 udev rule to ensure your user can read and write to it, or simply change it's
@@ -25,17 +40,8 @@ ownership manually, ie:
 
     sudo chown user:user /dev/uid0
 
-Usage with looking glass is simple, but you do need to speecify both the path
-and the size as LookingGlass can not determine the size by itself at this time.
+Usage with looking glass is simple, you only need to specify the path to the
+device node, for example:
 
     ./looking-glass-client -f /dev/uio0 -L 16
 
-## Note
-
-This module is not strictly required, it is possible to access the device
-via the /sys interface directly, for example:
-
-    ./looking-glass-client -f /sys/devices/pci0000:00/0000:00:03.0/resource2_wc
-
-Obviously adjusting the PCI device IDs as required. However while this is
-possible it is not recommended as access to the shared memory is much slower.

module/dkms.conf

@@ -0,0 +1,8 @@
+PACKAGE_NAME=kvmfr
+PACKAGE_VERSION=0.1
+BUILT_MODULE_NAME[0]="$PACKAGE_NAME"
+MAKE[0]="make -C ${kernel_source_dir} M=${dkms_tree}/${PACKAGE_NAME}/${PACKAGE_VERSION}/build"
+CLEAN="make -C ${kernel_source_dir} M=${dkms_tree}/${PACKAGE_NAME}/${PACKAGE_VERSION}/build clean"
+DEST_MODULE_LOCATION[0]=/extra
+REMAKE_INITRD=yes
+AUTOINSTALL=yes