#!/bin/bash
#
# https://github.com/brezlord/iDRAC7_fan_control
# Modified by Zeb Hering
# A simple script to control fan speeds on Dell generation 12 PowerEdge servers. 
# If the inlet temperature is above $TEMP_THRESHOLD C enable iDRAC dynamic control and exit program.
# If inlet temp is below $TEMP_THRESHOLD C set fan control to manual and set fan speed to predetermined value.
# The tower servers T320, T420 & T620 inlet temperature sensor is after the HDDs so temperature will
# be higher than the ambient temperature.

# Variables
IDRAC_IP="10.1.1.251"
IDRAC_USER="root"
IDRAC_PASSWORD="*^b#!efRhE8qULqUCa4U"
# Fan speed in %
SPEED0="0x00"
SPEED5="0x05"
SPEED10="0x0a"
SPEED15="0x0f"
SPEED20="0x14"
SPEED25="0x19"
SPEED30="0x1e"
SPEED35="0x23"
TEMP_THRESHOLD="65"  # iDRAC dynamic control enable threshold
TEMP_SENSOR="0Eh"  # CPU 1 Temp 
TEMP_SENSOR="0Fh"  # CPU 2 Temp 
SENSOR_NAME="Sensor"

if [ "$TEMP_SENSOR" == "04h" ]  
then 
    SENSOR_NAME="Inlet" 
elif [ "$TEMP_SENSOR" == "01h" ]  
then 
    SENSOR_NAME="Exhaust" 
elif [ "$TEMP_SENSOR" == "0Eh" ]  
then 
    SENSOR_NAME="CPU1" 
elif [ "$TEMP_SENSOR" == "0Fh" ]  
then 
    SENSOR_NAME="CPU2"             
fi 

# Get system date & time.
DATE=$(date +%d-%m-%Y\ %H:%M:%S) 
echo "Date $DATE" 

# Get temperature from iDRAC for CPU1 and CPU2.
T_CPU1=$(ipmitool -I lanplus -H $IDRAC_IP -U $IDRAC_USER -P $IDRAC_PASSWORD sdr type temperature | grep "0Eh" | cut -d"|" -f5 | cut -d" " -f2)
T_CPU2=$(ipmitool -I lanplus -H $IDRAC_IP -U $IDRAC_USER -P $IDRAC_PASSWORD sdr type temperature | grep "0Fh" | cut -d"|" -f5 | cut -d" " -f2)

echo "--> iDRAC IP Address: $IDRAC_IP"
echo "--> Current CPU1 Temp: $T_CPU1"
echo "--> Current CPU2 Temp: $T_CPU2"

# Compare the temperatures of CPU1 and CPU2 and set $T to the hotter one.
if [ $(echo "$T_CPU1 > $T_CPU2" | bc) -eq 1 ]; then
    T=$T_CPU1
    SENSOR_NAME="CPU1"
else
    T=$T_CPU2
    SENSOR_NAME="CPU2"
fi

echo "--> Hottest Sensor: $SENSOR_NAME - Temp: $T"

# If ambient temperature is above $TEMP_THRESHOLD C enable dynamic control and exit, if below set manual control.
if [[ $T > $TEMP_THRESHOLD ]]
then
  echo "--> Temperature is above Dynamic Threshold - $TEMP_THRESHOLD C"
  echo "--> Enabled dynamic fan control"
  ipmitool -I lanplus -H $IDRAC_IP -U $IDRAC_USER -P $IDRAC_PASSWORD  raw 0x30 0x30 0x01 0x01
  exit 1
else
  echo "--> Temperature is below Dynamic Threshold - $TEMP_THRESHOLD C"
  echo "--> Disabled dynamic fan control"
  ipmitool -I lanplus -H $IDRAC_IP -U $IDRAC_USER -P $IDRAC_PASSWORD  raw 0x30 0x30 0x01 0x00
fi

# Set fan speed dependant on ambient temperature if inlet temperaturte is below $TEMP_THRESHOLD C.
# If inlet temperature between 0 and 30deg C then set fans to 10%.
if [ "$T" -ge 0 ] && [ "$T" -le 30 ]
then
  echo "--> Setting fan speed to 10%"
  ipmitool -I lanplus -H $IDRAC_IP -U $IDRAC_USER -P $IDRAC_PASSWORD raw 0x30 0x30 0x02 0xff $SPEED10

# If inlet temperature between 35 and 40deg C then set fans to 15%
elif [ "$T" -ge 35 ] && [ "$T" -le 40 ]
then
  echo "--> Setting fan speed to 15%"
  ipmitool -I lanplus -H $IDRAC_IP -U $IDRAC_USER -P $IDRAC_PASSWORD  raw 0x30 0x30 0x02 0xff $SPEED15

# If inlet temperature between 40 and 50deg C then set fans to 20%
elif [ "$T" -ge 40 ] && [ "$T" -le 50 ]
then
  echo "--> Setting fan speed to 20%"
  ipmitool -I lanplus -H $IDRAC_IP -U $IDRAC_USER -P $IDRAC_PASSWORD  raw 0x30 0x30 0x02 0xff $SPEED20

# If inlet temperature between 55 and $TEMP_THRESHOLD C then set fans to 25%
elif [ "$T" -ge 51 ] && [ "$T" -le $TEMP_THRESHOLD ]
then
  echo "--> Setting fan speed to 25%"
  ipmitool -I lanplus -H $IDRAC_IP -U $IDRAC_USER -P $IDRAC_PASSWORD  raw 0x30 0x30 0x02 0xff $SPEED25
fi