mirror of
https://github.com/gtxaspec/wz_mini_hacks.git
synced 2024-12-23 04:33:36 +00:00
update install and booting method
This commit is contained in:
parent
fe9e712c38
commit
b63fe86438
72
README.md
72
README.md
@ -1,58 +1,61 @@
|
|||||||
# wz_mini_hacks
|
# wz_mini_hacks
|
||||||
### v3 devices ONLY
|
### v3 devices ONLY
|
||||||
|
|
||||||
Run the latest stable ( 4.36.8.32 ) firmware on your v3 cam and have root access to the device. This is in early stages of testing, use CAUTION if you are unsure of what you are doing. No support whatsoever is offered with this release.
|
Run the latest stable ( 4.36.8.32 ) firmware on your v3 cam and have root access to the device. This is in early stages of testing, use CAUTION if you are unsure of what you are doing. No support whatsoever is offered with this release.
|
||||||
|
**Do not contact the manufacturer for information or support, they will not be able to assist you!**
|
||||||
|
|
||||||
|
### Related Projects:
|
||||||
|
* wz_mini_debian: run full debian in a chroot, on the v3!
|
||||||
|
* wz_mini_utils: various statically compiled binaries for use with the v3 (mipsel)
|
||||||
|
|
||||||
|
|
||||||
## Features
|
## Features
|
||||||
|
|
||||||
* Modifies /dev/mtd2, changes the unknown root password to WYom2020, adds a hook to /etc/init.d/rcS to run a script ( /media/mmc/run_mmc.sh ) from the micro sd card 30 seconds after the camera has booted successfully.
|
* No modification is done to the system. **_Zero!_**
|
||||||
* Flashes the latest firmware during installation ( 4.36.8.32, as of this writing )
|
* Custom kernel loads all required files from micro-sd card
|
||||||
* Enables SSH, telnet will be disabled after installation.
|
* Easy uninstall, just remove files from micro-sd card, or don't use a micro-sd card at all!
|
||||||
* Add your own changes to run at boot into the script on the micro sd card located at /media/mmc/run_mmc.sh, mount nfs, run ping, whatever you want.
|
* Add your own changes to run at boot into the script on the micro sd card located at /media/mmc/run_mmc.sh, mount nfs, run ping, whatever you want
|
||||||
* Ability to update to the latest stable or beta firmware, this mod should survive updates ( as long as the firmware update does not change /dev/mtd2.
|
* Ability to update to the latest stable or beta firmware, this mod should survive updates as long as the bootloader remains the same
|
||||||
* Ability to block remote AND app initiated firmware updates.
|
* Ability to block remote AND app initiated firmware updates
|
||||||
* An Internet connection is required to download and patch the files required for this to work.
|
* Works on ANY ( tested up to 4.36.8.32, even RTSP ) v3 firmware release
|
||||||
* Inspired by HclX and WyzeHacks, borrowed busybox and dropbearmulti from his v2 repo. Bless you for all your work! You are the master!
|
* DNS Spoofing or Telnet mod are *not* required prior to installation
|
||||||
* Works on ANY ( tested up to 4.36.8.32 ) v3 firmware relase
|
* *NEW* Automated installer, put files on the micro sd card and wait for the unit to reboot
|
||||||
* DNS Spoofing or Telnet mod are *not* required prior to installation.
|
|
||||||
* *NEW* Automated installer, put files on the micro sd card and wait for the unit to reboot.
|
|
||||||
* PAN v2 Support coming soon
|
* PAN v2 Support coming soon
|
||||||
|
* Inspired by HclX and WyzeHacks, borrowed busybox and dropbearmulti from his v2 repo. Bless you for all your work! You are the master!
|
||||||
|
|
||||||
## Prerequisites
|
## Prerequisites
|
||||||
|
|
||||||
* Linux
|
* Person
|
||||||
* squashfs-tools ( install with your favorite package manager )
|
* Computer
|
||||||
* wget
|
* Micro-SD Card is required!
|
||||||
|
|
||||||
## Setup
|
## Setup
|
||||||
|
|
||||||
1. git clone the repo, then run ./setup.sh compile to generate the files to be copied to your SD card
|
1. git clone the repo or download the repo zip
|
||||||
2. copy all the files inside of SD_ROOT to your micro sd card
|
2. copy all the files inside of SD_ROOT to your micro sd card
|
||||||
|
|
||||||
On PC:
|
|
||||||
```bash
|
|
||||||
./setup.sh compile
|
|
||||||
```
|
|
||||||
To disable automatic firmware updates, edit run_mmc.sh on your micro sd card, un-comment the lines following:
|
|
||||||
```bash
|
|
||||||
#echo "Disable remote firmware upgrade, uncomment lines below to enable"
|
|
||||||
```
|
|
||||||
|
|
||||||
If a remote or app update is initiated, the camera will reboot due to the failure of the update. The firmware update should not proceed again for some time, or at all again.
|
|
||||||
|
|
||||||
## Installation
|
## Installation
|
||||||
1. Turn off the v3 camera
|
1. Turn off the v3 camera
|
||||||
2. Insert the micro sd memory card into the v3 camera
|
2. Insert the micro sd memory card into the v3 camera
|
||||||
3. Turn on the v3 camera
|
3. Turn on the v3 camera
|
||||||
4. The installation will begin when the front led light blinks slowly between red and blue.
|
4. The camera will boot, then you may connect via the IP address of your device using SSH, port 22. username is root password is WYom2020. It may take a few minutes for the device to finish booting and connect to wifi, then launch the SSH server. Be patient.
|
||||||
5. The installation will complete when the front led light blinks rapidly red and blue.
|
|
||||||
6. The camera will reboot, then you may connect via the IP address of your device using SSH, port 22. username is root password is WYom2020. It may take a few minutes for the device to finish booting and connect to wifi, then launch the SSH server. Be patient.
|
## Removal
|
||||||
|
1. Delete the files you copied to the memory card. The next time you boot the camera, you will return to stock firmware.
|
||||||
|
|
||||||
## Customization
|
## Customization
|
||||||
|
|
||||||
Edit run_mmc.sh, this is a script stored on the micro sd card that is run when the camera boots. You can change the hostname of the camera, mount NFS, add ping commands, anything you like.
|
Edit run_mmc.sh, this is a script stored on the micro sd card that is run when the camera boots. You can change the hostname of the camera, mount NFS, add ping commands, anything you like.
|
||||||
|
|
||||||
|
To disable automatic firmware updates, edit run_mmc.sh on your micro sd card, un-comment the lines following:
|
||||||
|
```bash
|
||||||
|
#echo "Disable remote firmware upgrade, uncomment lines below to enable"
|
||||||
|
```
|
||||||
|
If a remote or app update is initiated, the camera will reboot due to the failure of the update. The firmware update should not proceed again for some time, or at all again.
|
||||||
|
|
||||||
## Latest Updates
|
## Latest Updates
|
||||||
|
|
||||||
|
* 04-12-22: Updated, custom kernel loads all required items from micro sd card. System modification no longer needed.
|
||||||
* 04-05-22: Update readme to indicate that telnet mod nor DNS spoofing is required for installation, and add pre-requisites section.
|
* 04-05-22: Update readme to indicate that telnet mod nor DNS spoofing is required for installation, and add pre-requisites section.
|
||||||
* 04-02-22: Update to automatic install method, remove manual install.
|
* 04-02-22: Update to automatic install method, remove manual install.
|
||||||
|
|
||||||
@ -70,8 +73,9 @@ DO NOT USE THIS SOFTWARE IF YOU ARE NOT CONFIDENT IN RESTORING YOUR DEVICE FROM
|
|||||||
Pull requests are welcome. For major changes, please open an issue first to discuss what you would like to change.
|
Pull requests are welcome. For major changes, please open an issue first to discuss what you would like to change.
|
||||||
|
|
||||||
## Thank You
|
## Thank You
|
||||||
Thank you to everyone who is passionate about Wyze products for making the devices popular, and thank you to Wyze for producing them. Sign up for CamPlus, show some love to the company.
|
Thank you to everyone who is passionate about Wyze products for making the devices popular, and thank you to Wyze for producing them. Sign up for CamPlus, show some love and support to the company.
|
||||||
|
|
||||||
Thanks for HclX for WyzeHacks!
|
Thanks for HclX for WyzeHacks! https://github.com/HclX/WyzeHacks/
|
||||||
Thank you bakueikozo for his atomcam_tools repo! https://github.com/bakueikozo/atomcam_tools
|
Thank you mnakada for his atomcam_tools fork! https://github.com/mnakada/atomcam_tools
|
||||||
Thank you to virmaior for the atomcam_tools info!
|
Thank you bakueikozo for his atomcam_tools repo! https://github.com/bakueikozo/atomcam_tools
|
||||||
|
Thank you to virmaior for the atomcam_tools tip!
|
||||||
|
BIN
SD_ROOT/factory_t31_ZMC6tiIDQN
Executable file
BIN
SD_ROOT/factory_t31_ZMC6tiIDQN
Executable file
Binary file not shown.
BIN
SD_ROOT/wz_mini/bin/busybox
Normal file
BIN
SD_ROOT/wz_mini/bin/busybox
Normal file
Binary file not shown.
1
SD_ROOT/wz_mini/etc/shadow
Normal file
1
SD_ROOT/wz_mini/etc/shadow
Normal file
@ -0,0 +1 @@
|
|||||||
|
root:aVG8.5PMEOfnQ:0:0:99999:7:::
|
55
SD_ROOT/wz_mini/run_mmc.sh
Executable file
55
SD_ROOT/wz_mini/run_mmc.sh
Executable file
@ -0,0 +1,55 @@
|
|||||||
|
#!/bin/sh
|
||||||
|
|
||||||
|
echo "check if ethernet adapter is present"
|
||||||
|
if [[ ! -d /sys/class/net/eth* ]]; then
|
||||||
|
echo "usb ethernet not present"
|
||||||
|
if [[ ! -d /sys/class/net/usb0* ]]; then
|
||||||
|
echo "usb host not present"
|
||||||
|
else
|
||||||
|
ifconfig usb0 down
|
||||||
|
ifconfig wlan0 down
|
||||||
|
/media/mmc/busybox ip link set wlan0 address 02:01:02:03:04:08
|
||||||
|
/media/mmc/busybox ip link set wlan0 name wlanold
|
||||||
|
/media/mmc/busybox ip link set usb0 name wlan0
|
||||||
|
|
||||||
|
ifconfig wlan0 up
|
||||||
|
udhcpc -i wlan0
|
||||||
|
/media/mmc/dropbearmulti dropbear -R -m &
|
||||||
|
sleep 5
|
||||||
|
mount -o bind /media/mmc/wpa_cli.sh /bin/wpa_cli
|
||||||
|
fi
|
||||||
|
else
|
||||||
|
ifconfig eth0 down
|
||||||
|
ifconfig wlan0 down
|
||||||
|
|
||||||
|
/media/mmc/busybox ip link set wlan0 name wlanold
|
||||||
|
/media/mmc/busybox ip link set eth0 name wlan0
|
||||||
|
|
||||||
|
ifconfig wlan0 up
|
||||||
|
udhcpc -i wlan0
|
||||||
|
/media/mmc/dropbearmulti dropbear -R -m &
|
||||||
|
sleep 5
|
||||||
|
mount -o bind /media/mmc/wpa_cli.sh /bin/wpa_cli
|
||||||
|
fi
|
||||||
|
|
||||||
|
echo set hostname
|
||||||
|
hostname WCV3_spare_test
|
||||||
|
|
||||||
|
echo Store dmesg logs
|
||||||
|
dmesg > /media/mmc/wz_mini/logs/dmesg.log
|
||||||
|
|
||||||
|
echo Run dropbear ssh server
|
||||||
|
/media/mmc/wz_mini/bin/dropbearmulti dropbear -R -m
|
||||||
|
|
||||||
|
#echo Disable remote firmware upgrade, uncomment lines below to enable
|
||||||
|
#mkdir /tmp/Upgrade
|
||||||
|
#mount -t tmpfs -o size=1,nr_inodes=1 none /tmp/Upgrade
|
||||||
|
#echo -e 127.0.0.1 localhost n127.0.0.1 wyze-upgrade-service.wyzecam.com > /tmp/hosts_wz
|
||||||
|
#mount --bind /tmp/hosts_wz /etc/hosts
|
||||||
|
|
||||||
|
sleep 3
|
||||||
|
|
||||||
|
#Place commands here to run 30 seconds after boot
|
||||||
|
#such as mount nfs, ping, etc
|
||||||
|
|
||||||
|
#mount -t nfs -o nolock,rw,noatime,nodiratime 192.168.1.1:/volume1 /media/mmc/record
|
BIN
SD_ROOT/wz_mini/usr/share/terminfo.tar
Normal file
BIN
SD_ROOT/wz_mini/usr/share/terminfo.tar
Normal file
Binary file not shown.
24
SD_ROOT/wz_mini/v3_init.sh
Executable file
24
SD_ROOT/wz_mini/v3_init.sh
Executable file
@ -0,0 +1,24 @@
|
|||||||
|
#!/bin/sh
|
||||||
|
###
|
||||||
|
###DO NOT MODIFY UNLESS YOU KNOW WHAT YOU ARE DOING
|
||||||
|
###
|
||||||
|
|
||||||
|
echo '
|
||||||
|
__ ________ __ __ _____ _ _ _____
|
||||||
|
\ \ / |___ / | \/ |_ _| \ | |_ _|
|
||||||
|
\ \ /\ / / / / | \ / | | | | \| | | |
|
||||||
|
\ \/ \/ / / / | |\/| | | | | . ` | | |
|
||||||
|
\ /\ / / /__ | | | |_| |_| |\ |_| |_
|
||||||
|
\/ \/ /_____| |_| |_|_____|_| \_|_____|
|
||||||
|
______
|
||||||
|
|______|
|
||||||
|
'
|
||||||
|
|
||||||
|
mount -t tmpfs /tmp
|
||||||
|
cp /opt/wz_mini/etc/shadow /tmp/
|
||||||
|
mount --bind /tmp/shadow /etc/shadow
|
||||||
|
chmod 400 /etc/shadow
|
||||||
|
|
||||||
|
{ sleep 30; /media/mmc/wz_mini/run_mmc.sh > /media/mmc/wz_mini/wz_mini_hacks.log; } &
|
||||||
|
|
||||||
|
/linuxrc
|
103
setup.sh
103
setup.sh
@ -1,103 +0,0 @@
|
|||||||
#!/bin/bash
|
|
||||||
|
|
||||||
LATEST_ROOTFS="4.36.3.19"
|
|
||||||
LATEST_FW="4.36.8.32"
|
|
||||||
|
|
||||||
clean() {
|
|
||||||
rm -rf tmp_root
|
|
||||||
rm -rf SD_ROOT
|
|
||||||
}
|
|
||||||
|
|
||||||
|
|
||||||
setup() {
|
|
||||||
echo "Create SD Card root directory"
|
|
||||||
mkdir SD_ROOT
|
|
||||||
|
|
||||||
echo "Copy test to SD_ROOT"
|
|
||||||
cp Test.tar SD_ROOT
|
|
||||||
|
|
||||||
echo "Download utilities to SD_ROOT"
|
|
||||||
wget https://www.busybox.net/downloads/binaries/1.21.1/busybox-mipsel -O SD_ROOT/busybox
|
|
||||||
|
|
||||||
echo "Copy locla utilities to SD_ROOT"
|
|
||||||
cp dropbearmulti SD_ROOT
|
|
||||||
|
|
||||||
echo "Download latest rootfs firmware $LATEST_ROOTFS"
|
|
||||||
|
|
||||||
wget https://s3-us-west-2.amazonaws.com/wuv2/upgrade/WYZE_CAKP2JFUS/firmware/$LATEST_ROOTFS.tar --directory-prefix=./tmp_root/
|
|
||||||
mkdir ./tmp_root/"$LATEST_ROOTFS"_ext
|
|
||||||
tar -xf ./tmp_root/$LATEST_ROOTFS.tar -C ./tmp_root/"$LATEST_ROOTFS"_ext
|
|
||||||
|
|
||||||
echo "Download latest stable firmware $LATEST_FW"
|
|
||||||
|
|
||||||
mkdir ./tmp_root/"$LATEST_FW"_ext
|
|
||||||
wget https://s3-us-west-2.amazonaws.com/wuv2/upgrade/WYZE_CAKP2JFUS/firmware/$LATEST_FW.tar --directory-prefix=./tmp_root/
|
|
||||||
tar -xf ./tmp_root/$LATEST_FW.tar -C ./tmp_root/"$LATEST_FW"_ext
|
|
||||||
|
|
||||||
echo "Extract rootfs, prepare for modification"
|
|
||||||
unsquashfs -d ./tmp_root/"$LATEST_ROOTFS"_ext/Upgrade/rootfs_dir ./tmp_root/"$LATEST_ROOTFS"_ext/Upgrade/rootfs
|
|
||||||
|
|
||||||
##test
|
|
||||||
|
|
||||||
mkdir ./tmp_root/"$LATEST_ROOTFS"_ext/Upgrade/rootfs_dir/.ssh
|
|
||||||
|
|
||||||
echo "Change unknown stock password to WYom2020 in /etc/shadow"
|
|
||||||
rm -rf ./tmp_root/"$LATEST_ROOTFS"_ext/Upgrade/rootfs_dir/etc/shadow
|
|
||||||
echo "root:aVG8.5PMEOfnQ:0:0:99999:7:::" > ./tmp_root/"$LATEST_ROOTFS"_ext/Upgrade/rootfs_dir/etc/shadow
|
|
||||||
chmod 400 ./tmp_root/"$LATEST_ROOTFS"_ext/Upgrade/rootfs_dir/etc/shadow
|
|
||||||
|
|
||||||
echo "Add run_mmc.sh to rootfs rcS init.d script"
|
|
||||||
sed -i '/\-f\ \/system\/init\/app_init.sh/a { sleep 30; /media/mmc/run_mmc.sh > /media/mmc/wz_mini_hacks.log; } &' ./tmp_root/"$LATEST_ROOTFS"_ext/Upgrade/rootfs_dir/etc/init.d/rcS
|
|
||||||
|
|
||||||
echo "repack rootfs for flashing"
|
|
||||||
mksquashfs ./tmp_root/"$LATEST_ROOTFS"_ext/Upgrade/rootfs_dir SD_ROOT/rootfs2.bin -noappend -all-root -comp xz
|
|
||||||
|
|
||||||
echo "copy latest appfs and kernel to SD_ROOT"
|
|
||||||
cp ./tmp_root/"$LATEST_FW"_ext/Upgrade/app SD_ROOT/appfs.bin
|
|
||||||
cp ./tmp_root/"$LATEST_FW"_ext/Upgrade/kernel SD_ROOT/kernel.bin
|
|
||||||
|
|
||||||
echo "extract run_mmc.sh script to SD_ROOT"
|
|
||||||
|
|
||||||
echo "#!/bin/sh
|
|
||||||
|
|
||||||
echo "set hostname"
|
|
||||||
hostname WCV3
|
|
||||||
|
|
||||||
echo "Store dmesg logs"
|
|
||||||
dmesg > /media/mmc/dmesg.log
|
|
||||||
|
|
||||||
#echo "Run telnetd"
|
|
||||||
#/media/mmc/busybox telnetd &
|
|
||||||
|
|
||||||
echo "Run dropbear ssh server"
|
|
||||||
/media/mmc/dropbearmulti dropbear -R -m
|
|
||||||
|
|
||||||
#echo "Disable remote firmware upgrade, uncomment lines below to enable"
|
|
||||||
#mkdir /tmp/Upgrade
|
|
||||||
#mount -t tmpfs -o size=1,nr_inodes=1 none /tmp/Upgrade
|
|
||||||
#echo -e "127.0.0.1 localhost \n127.0.0.1 wyze-upgrade-service.wyzecam.com" > /tmp/hosts_wz
|
|
||||||
#mount --bind /tmp/hosts_wz /etc/hosts
|
|
||||||
|
|
||||||
sleep 3
|
|
||||||
|
|
||||||
#Place commands here to run 30 seconds after boot
|
|
||||||
#such as mount nfs, ping, etc
|
|
||||||
|
|
||||||
#mount -t nfs -o nolock,rw,noatime,nodiratime 192.168.1.1:/volume1 /media/mmc/record
|
|
||||||
|
|
||||||
" > SD_ROOT/run_mmc.sh
|
|
||||||
chmod 755 SD_ROOT/run_mmc.sh
|
|
||||||
|
|
||||||
}
|
|
||||||
|
|
||||||
|
|
||||||
if [ "$1" == "clean" ]; then
|
|
||||||
clean
|
|
||||||
elif [ "$1" == "compile" ]; then
|
|
||||||
setup
|
|
||||||
else
|
|
||||||
echo "wz_mini_hacks setup script"
|
|
||||||
echo "Usage:"
|
|
||||||
echo "./setup.sh compile to download and patch firmware"
|
|
||||||
echo "./setup.sh clean to delete all downloaded files and clean directory"
|
|
||||||
fi
|
|
Loading…
Reference in New Issue
Block a user