New init system (#216)

* new init system

* update new init scripts

* update checksum

* fix broken audio promps with new init scripts

* fix debug/upgrade mode

* fix bonding and eth0 hw addr

* add checksum

* fix bonding setup

* add rtsp auth disable

* adjust network init scripts path

* recreated repo and re added cron scripts (#211)

* recreated repo and re added cron scripts

* rename cron script and move it to the right folder.

* Delete .vs directory

remove .vs directory

* add deubg message to bonding rc.d script

* add crontab variable to wz_mini.conf

* fix mp4write

* add syslog debug feature

* fix syslog init blocking

* fix syslog save function

* increase imp_helper rerun delay

* update init scripts

* fix bonding and usb-direct

* update checksum

* add netmon for bonding

* fix supervisor function

* update model detection

* fix debugging injection on T20 devices

Co-authored-by: sideup66 <47700565+sideup66@users.noreply.github.com>
This commit is contained in:
gtxaspec 2022-08-07 18:46:00 -07:00 committed by GitHub
parent 98743f21c9
commit 9ce6bbd92a
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
59 changed files with 2131 additions and 1222 deletions

View File

@ -300,7 +300,7 @@ RTSP_HI_RES_ENABLE_AUDIO="true"
RTSP_HI_RES_MAX_BITRATE="2048" RTSP_HI_RES_MAX_BITRATE="2048"
RTSP_HI_RES_TARGET_BITRATE="1024" RTSP_HI_RES_TARGET_BITRATE="1024"
RTSP_HI_RES_ENC_PARAMETER="2" RTSP_HI_RES_ENC_PARAMETER="2"
RTSP_HI_RES_FPS="15" RTSP_HI_RES_FPS=""
RTSP_LOW_RES_ENABLED="false" RTSP_LOW_RES_ENABLED="false"
RTSP_LOW_RES_ENABLE_AUDIO="false" RTSP_LOW_RES_ENABLE_AUDIO="false"
@ -308,10 +308,17 @@ RTSP_LOW_RES_MAX_BITRATE=""
RTSP_LOW_RES_TARGET_BITRATE="" RTSP_LOW_RES_TARGET_BITRATE=""
RTSP_LOW_RES_ENC_PARAMETER="" RTSP_LOW_RES_ENC_PARAMETER=""
RTSP_LOW_RES_FPS="" RTSP_LOW_RES_FPS=""
RTSP_AUTH_DISABLE="false"
``` ```
the singular stream will be located at ```rtsp://login:password@IP_ADDRESS:8554/unicast``` the singular stream will be located at ```rtsp://login:password@IP_ADDRESS:8554/unicast```
multiple streams are located at ```rtsp://login:password@IP_ADDRESS:8554/video1_unicast``` and ```rtsp://login:password@IP_ADDRESS:8554/video2_unicast``` multiple streams are located at ```rtsp://login:password@IP_ADDRESS:8554/video1_unicast``` and ```rtsp://login:password@IP_ADDRESS:8554/video2_unicast```
You may disable authentication by setting `RTSP_AUTH_DISABLE` to true.
Setting the FPS is not required unless you want to change the default device settings.
Note: If you don't set the password, the password will be set to the unique MAC address of the camera, in all uppercase, including the colons... for example:. AA:BB:CC:00:11:22. It's typically printed on the camera. Higher video bitrates may overload your Wi-Fi connection, so a wired connection is recommended. Note: If you don't set the password, the password will be set to the unique MAC address of the camera, in all uppercase, including the colons... for example:. AA:BB:CC:00:11:22. It's typically printed on the camera. Higher video bitrates may overload your Wi-Fi connection, so a wired connection is recommended.
Huge credit to @mnakada for his libcallback library: [https://github.com/mnakada/atomcam_tools](https://github.com/mnakada/atomcam_tools) Huge credit to @mnakada for his libcallback library: [https://github.com/mnakada/atomcam_tools](https://github.com/mnakada/atomcam_tools)
@ -321,7 +328,7 @@ Huge credit to @mnakada for his libcallback library: [https://github.com/mnakada
mp4_write: mp4_write:
``` ```
ENABLE_MP4_WRITE="false" ENABLE_MP4_WRITE="true"
``` ```
Forces the camera to skip writing files to /tmp, and write them directly to your storage medium or network mount, prevents trashing. Normally videos are written to /tmp then moved using `mv`, which can overload camera and or remote network connections. Useful for NFS/CIFS remote video storage. Forces the camera to skip writing files to /tmp, and write them directly to your storage medium or network mount, prevents trashing. Normally videos are written to /tmp then moved using `mv`, which can overload camera and or remote network connections. Useful for NFS/CIFS remote video storage.
@ -434,7 +441,7 @@ NOTE: if you are upgrading a V2 camera from a release older than 06-16-22, you m
--- ---
``` ```
NIGHT_DROP_DISABLE="false" NIGHT_DROP_DISABLE="true"
``` ```
Stop the camera from dropping the frame rate during nightvision. Stop the camera from dropping the frame rate during nightvision.
@ -495,8 +502,25 @@ Enables the local webserver, for configuration, car control, or to retreive an i
--- ---
```
ENABLE_SYSLOG_SAVE="true"
```
Save the syslog to the `logs/` directory
---
```
ENABLE_CRONTAB="true"
```
Enable crontab. Located at `wz_mini/etc/cron/root`
---
## Latest Updates ## Latest Updates
* 08-07-22: Updated init.d scripts. Added syslog save feature. Fixed orientation issue on T31 devices in webcam mode. Added crontab support.
* 07-25-22: Add dnsmasq local dns option in configuration to prevent dns flooding on local networks. Added web server capability for configuration and car control. * 07-25-22: Add dnsmasq local dns option in configuration to prevent dns flooding on local networks. Added web server capability for configuration and car control.
* 07-14-22: Add car compatability with normally unsupported devices. * 07-14-22: Add car compatability with normally unsupported devices.
* 07-13-22: Includes latest build of libcallback, better RTSP video and audio performance: fixed broken audio caused by motor_stop on T20 devices, fixed waitMotion errors. `cmd jpeg` currently still broken on T20 devices, updated scripts to account for changed. Some usage of `cmd` has changes, please see command output. Kernel & modules updated to prepare for H265 support on T31. * 07-13-22: Includes latest build of libcallback, better RTSP video and audio performance: fixed broken audio caused by motor_stop on T20 devices, fixed waitMotion errors. `cmd jpeg` currently still broken on T20 devices, updated scripts to account for changed. Some usage of `cmd` has changes, please see command output. Kernel & modules updated to prepare for H265 support on T31.

View File

@ -10,7 +10,7 @@ if [ -d /opt/wz_mini/tmp/log_gather ] ; then
rm -rf /opt/wz_mini/tmp/log_gather rm -rf /opt/wz_mini/tmp/log_gather
create_dir create_dir
else else
create_dir create_dir
fi fi
echo "copy wz_mini logs" echo "copy wz_mini logs"

View File

@ -0,0 +1,9 @@
# Example of job definition:
# .---------------- minute (0 - 59)
# | .------------- hour (0 - 23)
# | | .---------- day of month (1 - 31)
# | | | .------- month (1 - 12) OR jan,feb,mar,apr ...
# | | | | .---- day of week (0 - 6) (Sunday=0 or 7) OR sun,mon,tue,wed,thu,fri,sat
# | | | | |
# * * * * * user-name command to be executed
#45 05 * * * /sbin/reboot

View File

@ -0,0 +1,41 @@
#!/bin/sh
### BEGIN INIT INFO
# Provides:
# Short-Description: Bind mount system files.
# Description: Replace specific system files with our customized versions via bind mount
### END INIT INFO
. /opt/wz_mini/wz_mini.conf
case "$1" in
start)
echo "#####$(basename "$0")#####"
echo "Replace stock busybox"
mount --bind /opt/wz_mini/bin/busybox /bin/busybox
echo "Replace stock fstab"
mount --bind /opt/wz_mini/etc/fstab /etc/fstab
echo "Replace stock inittab"
mount --bind /opt/wz_mini/etc/inittab /etc/inittab
echo "Replace /etc/profile for local/ssh shells"
mount --bind /opt/wz_mini/etc/profile /etc/profile
if [ -d /lib/modules ]; then
echo "Mount kernel modules in /lib"
mount --bind /opt/wz_mini/lib/modules /lib/modules
fi
echo "Replace system hostname"
echo $CUSTOM_HOSTNAME > /opt/wz_mini/etc/hostname
mount --bind /opt/wz_mini/etc/hostname /etc/hostname
;;
*)
echo "Usage: $0 {start}"
exit 1
;;
esac

View File

@ -0,0 +1,30 @@
#!/bin/sh
### BEGIN INIT INFO
# Provides:
# Short-Description: Mount tmpfs
# Description: Mount tmpfs for system and wz_mini
### END INIT INFO
./opt/wz_mini/wz_mini.conf
case "$1" in
start)
echo "#####$(basename "$0")#####"
echo "Mount wz_mini tmpfs"
mount -t tmpfs /opt/wz_mini/tmp
echo "Create workspace directory"
mkdir /opt/wz_mini/tmp/.storage
echo "Mounting global tmpfs"
mount -t tmpfs /tmp
;;
*)
echo "Usage: $0 {start}"
exit 1
;;
esac

View File

@ -0,0 +1,23 @@
#!/bin/sh
### BEGIN INIT INFO
# Provides:
# Short-Description: Setup BusyBox
# Description: Install BusyBox applets to wz_mini $PATH
### END INIT INFO
case "$1" in
start)
echo "#####$(basename "$0")#####"
echo "Install busybox applets"
mkdir /opt/wz_mini/tmp/.bin
/opt/wz_mini/bin/busybox --install -s /opt/wz_mini/tmp/.bin
;;
*)
echo "Usage: $0 {start}"
exit 1
;;
esac

View File

@ -0,0 +1,47 @@
#!/bin/sh
### BEGIN INIT INFO
# Provides:
# Short-Description: Detect device model
# Description: Detect which model device we are, and configure the system accordingly
### END INIT INFO
case "$1" in
start)
echo "#####$(basename "$0")#####"
##DETECT CAMERA MODEL & PLATFORM TYPE
#V2=WYZEC1-JZ
#PANv1=WYZECP1_JEF
#PANv2=HL_PAN2
#V3=WYZE_CAKP2JFUS
#DB3=WYZEDB3
#V3C=ATOM_CamV3C
#mtdblock9 only exists on the T20 platform, indicating V2 or PANv1
if [ -b /dev/mtdblock9 ]; then
mkdir /opt/wz_mini/tmp/params
mount -t jffs2 /dev/mtdblock9 /opt/wz_mini/tmp/params
touch /opt/wz_mini/tmp/.$(cat /opt/wz_mini/tmp/params/config/.product_config | grep PRODUCT_MODEL | sed -e 's#.*=\(\)#\1#')
touch /opt/wz_mini/tmp/.T20
echo "$(cat /opt/wz_mini/tmp/params/config/.product_config | grep PRODUCT_MODEL | sed -e 's#.*=\(\)#\1#') detected"
umount /opt/wz_mini/tmp/params
rm -rf /opt/wz_mini/tmp/params
elif [ -b /dev/mtdblock6 ]; then
mkdir /opt/wz_mini/tmp/configs
mount -t jffs2 /dev/mtdblock6 /opt/wz_mini/tmp/configs
touch /opt/wz_mini/tmp/.$(cat /opt/wz_mini/tmp/configs/.product_config | grep PRODUCT_MODEL | sed -e 's#.*=\(\)#\1#')
touch /opt/wz_mini/tmp/.T31
echo "$(cat /opt/wz_mini/tmp/configs/.product_config | grep PRODUCT_MODEL | sed -e 's#.*=\(\)#\1#') detected"
umount /opt/wz_mini/tmp/configs
rm -rf /opt/wz_mini/tmp/configs
fi
;;
*)
echo "Usage: $0 {start}"
exit 1
;;
esac

View File

@ -0,0 +1,28 @@
#!/bin/sh
### BEGIN INIT INFO
# Provides:
# Short-Description: Mount /system
# Description: Mount /system for manipulation, before app_init.sh does
### END INIT INFO
case "$1" in
start)
echo "#####$(basename "$0")#####"
if [ -f /opt/wz_mini/tmp/.T20 ]; then
echo "mounting /system"
mount -t jffs2 /dev/mtdblock4 /system
elif [ -f /opt/wz_mini/tmp/.T31 ]; then
echo "mounting /system"
mount /dev/mtdblock3 /system
fi
;;
*)
echo "Usage: $0 {start}"
exit 1
;;
esac

View File

@ -0,0 +1,30 @@
#!/bin/sh
### BEGIN INIT INFO
# Provides:
# Short-Description: Detect device CAR
# Description: Detect which CAR device
### END INIT INFO
case "$1" in
start)
echo "#####$(basename "$0")#####"
echo "Checking for CAR FW"
if [ -f /opt/wz_mini/tmp/.WYZEC1-JZ ]; then
if cat /system/bin/app.ver | grep 4.55; then
touch /opt/wz_mini/tmp/.CAR
echo "CAR FW detected!"
else
echo "CAR not detected"
fi
fi
;;
*)
echo "Usage: $0 {start}"
exit 1
;;
esac

View File

@ -0,0 +1,69 @@
#!/bin/sh
### BEGIN INIT INFO
# Provides:
# Short-Description: Inject commands into app_init.sh
# Description: Patch app_init.sh to inject wz_mini's init.d scripts
### END INIT INFO
. /opt/wz_mini/wz_mini.conf
case "$1" in
start)
echo "#####$(basename "$0")#####"
echo "Copy stock rcS"
cp /etc/init.d/rcS /opt/wz_mini/tmp/.storage/rcS
echo "Add verbose debugging to rcS"
sed -i '/^\# Set mdev.*/iset -x\n' /opt/wz_mini/tmp/.storage/rcS
echo "Inject init.d scripts to rcS"
sed -i '/^# Run init script.*/i/opt/wz_mini/etc/rc.d/K01network \&\n' /opt/wz_mini/tmp/.storage/rcS
sed -i '/^# Run init script.*/i/opt/wz_mini/etc/rc.d/K03rcd\n' /opt/wz_mini/tmp/.storage/rcS
echo "Modify Global Paths in rcS"
sed -i '/sbin:/s/$/:\/opt\/wz_mini\/bin/' /opt/wz_mini/tmp/.storage/rcS
sed -i '/system\/\lib/s/$/:\/opt\/wz_mini\/lib/' /opt/wz_mini/tmp/.storage/rcS
#Custom PATH hooks
#sed -i '/^# Run init script.*/i#Hook Library PATH here\nexport LD_LIBRARY_PATH=/tmp/test/lib:$LD_LIBRARY_PATH\n' /opt/wz_mini/tmp/.storage/rcS
#sed -i '/^# Run init script.*/i#Hook system PATH here\nexport PATH=/tmp/test/bin:$PATH\n' /opt/wz_mini/tmp/.storage/rcS
echo "Copy factory app_init.sh"
cp /system/init/app_init.sh /opt/wz_mini/tmp/.storage/app_init.sh
echo "Replace factory app_init.sh path"
sed -i '/\/system\/init\/app_init.sh/,+4d' /opt/wz_mini/tmp/.storage/rcS
sed -i '/Run init script.*/a /opt/wz_mini/tmp/.storage/app_init.sh \&\n' /opt/wz_mini/tmp/.storage/rcS
sed -i '/\/system\/init\/app_init.sh/,+2d' /opt/wz_mini/tmp/.storage/rcS
if [[ "$DEBUG_ENABLED" == "true" ]]; then
sed -i '/app_init.sh/,+4d' /opt/wz_mini/tmp/.storage/rcS
sed -i '/^# Run init/i/bin/sh /etc/profile' /opt/wz_mini/tmp/.storage/rcS
touch /tmp/dbgflag
elif [[ "$WEB_CAM_ENABLE" == "true" ]]; then
sed -i '/app_init.sh/,+4d' /opt/wz_mini/tmp/.storage/rcS
sed -i '/^# Run init/i/opt/wz_mini/etc/rc.d/K02webcam &' /opt/wz_mini/tmp/.storage/rcS
touch /tmp/dbgflag
elif [[ -d /opt/Upgrade ]]; then
sed -i '/app_init.sh/,+4d' /opt/wz_mini/tmp/.storage/rcS
sed -i '/^# Run init/i/bin/sh /etc/profile' /opt/wz_mini/tmp/.storage/rcS
sed -i '/^# Mount configs.*/i/opt/wz_mini/bin/upgrade-run.sh &\n' /opt/wz_mini/tmp/.storage/rcS
touch /tmp/dbgflag
fi
echo "Enable libcallback"
if [[ "$LIBCALLBACK_ENABLE" == "true" ]] || ([[ "$RTSP_HI_RES_ENABLED" == "true" ]] || [[ "$RTSP_LOW_RES_ENABLED" == "true" ]]); then
echo "set path for iCamera"
sed -i 's/\/system\/bin\/iCamera/\/opt\/wz_mini\/usr\/bin\/iCamera/g' /opt/wz_mini/tmp/.storage/app_init.sh
fi
;;
*)
echo "Usage: $0 {start}"
exit 1
;;
esac

View File

@ -0,0 +1,30 @@
#!/bin/sh
### BEGIN INIT INFO
# Provides:
# Short-Description: Change system password
# Description: Replace system password with wz_mini's version
### END INIT INFO
. /opt/wz_mini/wz_mini.conf
case "$1" in
start)
echo "#####$(basename "$0")#####"
echo "Replace stock password"
cp /opt/wz_mini/etc/shadow /opt/wz_mini/tmp/.storage/shadow
if [[ "$DEBUG_PASSWORD" == "true" ]]; then
sed -i 's/:[^:]*/:/' /opt/wz_mini/tmp/.storage/shadow
echo "Remove stock password"
fi
mount --bind /opt/wz_mini/tmp/.storage/shadow /etc/shadow
chmod 400 /etc/shadow
;;
*)
echo "Usage: $0 {start}"
exit 1
;;
esac

View File

@ -0,0 +1,40 @@
#!/bin/sh
### BEGIN INIT INFO
# Provides:
# Short-Description: Check for first boot of wz_mini
# Description: Check to see if this is the first time wz_mini is booting, if it is, play an audio prompt
### END INIT INFO
. /opt/wz_mini/wz_mini.conf
. /opt/wz_mini/etc/rc.common
case "$1" in
start)
echo "#####$(basename "$0")#####"
if [ -e /opt/wz_mini/etc/.first_boot ]; then
echo "First boot already completed"
else
echo "First boot, initializing"
touch /opt/wz_mini/etc/.first_boot
#May need different gpio for PANv1
#We don't rmmod this module, as it is marked [permanent] by the kernel on T20
if [ -f /opt/wz_mini/tmp/.T20 ]; then
insmod /opt/wz_mini/lib/modules/3.10.14/extra/audio.ko sign_mode=0
LD_LIBRARY_PATH='/opt/wz_mini/lib' /opt/wz_mini/bin/audioplay_t20 /opt/wz_mini/usr/share/audio/init_v2.wav $AUDIO_PROMPT_VOLUME
else
insmod /opt/wz_mini/lib/modules/3.10.14__isvp_swan_1.0__/extra/audio.ko spk_gpio=$GPIO alc_mode=0 mic_gain=0
/opt/wz_mini/bin/audioplay_t31 /opt/wz_mini/usr/share/audio/init.wav $AUDIO_PROMPT_VOLUME
rmmod audio
fi
fi
;;
*)
echo "Usage: $0 {start}"
exit 1
;;
esac

View File

@ -0,0 +1,160 @@
#!/bin/sh
### BEGIN INIT INFO
# Provides:
# Short-Description: Load kernel modules
# Description: Load kernel modules depending on model and configuration
### END INIT INFO
. /opt/wz_mini/wz_mini.conf
. /opt/wz_mini/etc/rc.common
case "$1" in
start)
echo "#####$(basename "$0")#####"
if [[ "$ENABLE_RTL8189FS_DRIVER" == "true" ]] || [[ "$ENABLE_RTL8189FS_DRIVER" == "" ]]; then
echo "Enable 8189fs"
if [ -f /opt/wz_mini/tmp/.WYZEC1-JZ ]; then
sed -i 's/\/driver\/rtl8189ftv.ko/\/opt\/wz_mini\/lib\/modules\/3.10.14\/extra\/8189fs.ko rtw_power_mgnt=0 rtw_enusbss=0 rtw_drv_log_level=0/g' /opt/wz_mini/tmp/.storage/app_init.sh
elif [ -f /opt/wz_mini/tmp/.WYZECP1_JEF ]; then
sed -i 's/insmod \/driver\/8189es.ko/insmod \/opt\/wz_mini\/lib\/modules\/3.10.14\/extra\/8189es.ko rtw_power_mgnt=0 rtw_enusbss=0 rtw_drv_log_level=0/g' /opt/wz_mini/tmp/.storage/app_init.sh
elif [ -f /opt/wz_mini/tmp/.WYZE_CAKP2JFUS ]; then
sed -i 's/\/system\/driver\/rtl8189ftv.ko/\/opt\/wz_mini\/lib\/modules\/3.10.14\_\_isvp_swan_1.0\_\_\/extra\/8189fs.ko rtw_power_mgnt=0 rtw_enusbss=0 rtw_drv_log_level=0/g' /opt/wz_mini/tmp/.storage/app_init.sh
elif [ -f /opt/wz_mini/tmp/.ATOM_CamV3C ]; then
sed -i 's/\/system\/driver\/rtl8189ftv.ko/\/opt\/wz_mini\/lib\/modules\/3.10.14\_\_isvp_swan_1.0\_\_\/extra\/8189fs.ko rtw_power_mgnt=0 rtw_enusbss=0 rtw_drv_log_level=0/g' /opt/wz_mini/tmp/.storage/app_init.sh
fi
fi
if [[ "$ENABLE_ATBM603X_DRIVER" == "true" ]] || [[ "$ENABLE_ATBM603X_DRIVER" == "" ]]; then
echo "Enable atbm603x_wifi_sdio"
if [ -f /opt/wz_mini/tmp/.ATOM_CamV3C ]; then
sed -i 's/\/thirdlib\/atbm603x_wifi_sdio.ko/\/opt\/wz_mini\/lib\/modules\/3.10.14\_\_isvp_swan_1.0\_\_\/extra\/atbm603x_wifi_sdio.ko atbm_printk_mask=0/g' /opt/wz_mini/tmp/.storage/app_init.sh
elif [ -f /opt/wz_mini/tmp/.T31 ] && ! [ -f /opt/wz_mini/tmp/.ATOM_CamV3C ]; then
sed -i 's/\/system\/driver\/atbm603x_wifi_sdio.ko/\/opt\/wz_mini\/lib\/modules\/3.10.14\_\_isvp_swan_1.0\_\_\/extra\/atbm603x_wifi_sdio.ko atbm_printk_mask=0/g' /opt/wz_mini/tmp/.storage/app_init.sh
fi
fi
if [ -f /opt/wz_mini/tmp/.CAR ] || [[ "$ENABLE_CAR_DRIVER" == "true" ]]; then
echo "Enable cp210x serial driver for car"
modprobe cp210x
fi
if ([[ "$RTSP_HI_RES_ENABLED" == "true" ]] || [[ "$RTSP_LOW_RES_ENABLED" == "true" ]]) && ! [[ -e /tmp/dbgflag ]]; then
if [[ "$RTSP_LOW_RES_ENABLED" == "true" ]] && [[ "$RTSP_HI_RES_ENABLED" == "true" ]]; then
if [ -f /opt/wz_mini/tmp/.T20 ]; then
echo "Load video loopback driver at video6 video7"
insmod /opt/wz_mini/lib/modules/3.10.14/extra/v4l2loopback_V2.ko video_nr=6,7
else
echo "Load video loopback driver at video1 video2"
insmod /opt/wz_mini/lib/modules/3.10.14__isvp_swan_1.0__/extra/v4l2loopback.ko video_nr=1,2
fi
elif [[ "$RTSP_LOW_RES_ENABLED" == "true" ]]; then
if [ -f /opt/wz_mini/tmp/.T20 ]; then
echo "Load video loopback driver at video7"
insmod /opt/wz_mini/lib/modules/3.10.14/extra/v4l2loopback_V2.ko video_nr=7
else
echo "Load video loopback driver at video2"
insmod /opt/wz_mini/lib/modules/3.10.14__isvp_swan_1.0__/extra/v4l2loopback.ko video_nr=2
fi
elif [[ "$RTSP_HI_RES_ENABLED" == "true" ]]; then
if [ -f /opt/wz_mini/tmp/.T20 ]; then
echo "Load video loopback driver at video6"
insmod /opt/wz_mini/lib/modules/3.10.14/extra/v4l2loopback_V2.ko video_nr=6
else
echo "Load video loopback driver at video1"
insmod /opt/wz_mini/lib/modules/3.10.14__isvp_swan_1.0__/extra/v4l2loopback.ko video_nr=1
fi
fi
fi
if [[ "$ENABLE_NFSv4" == "true" ]]; then
insmod $KMOD_PATH/kernel/lib/oid_registry.ko
insmod $KMOD_PATH/kernel/net/dns_resolver/dns_resolver.ko
insmod $KMOD_PATH/kernel/fs/nfs/nfsv4.ko
insmod $KMOD_PATH/kernel/net/sunrpc/auth_gss/auth_rpcgss.ko
echo "NFSv4 enabled"
fi
if [[ "$ENABLE_IPTABLES" == "true" ]]; then
insmod $KMOD_PATH/kernel/net/netfilter/x_tables.ko
insmod $KMOD_PATH/kernel/net/ipv4/netfilter/ip_tables.ko
insmod $KMOD_PATH/kernel/net/ipv4/netfilter/ipt_REJECT.ko
insmod $KMOD_PATH/kernel/net/ipv4/netfilter/iptable_filter.ko
insmod $KMOD_PATH/kernel/net/ipv4/netfilter/iptable_mangle.ko
echo "iptables IPv4 enabled"
if [[ "$ENABLE_IPV6" == "true" ]]; then
insmod $KMOD_PATH/kernel/net/ipv6/netfilter/ip6_tables.ko
insmod $KMOD_PATH/kernel/net/ipv6/netfilter/ip6t_REJECT.ko
insmod $KMOD_PATH/kernel/net/ipv6/netfilter/ip6table_filter.ko
insmod $KMOD_PATH/kernel/net/ipv6/netfilter/ip6table_mangle.ko
echo "iptables IPv6 enabled"
fi
fi
if [[ "$ENABLE_WIREGUARD" == "true" ]]; then
insmod $KMOD_PATH/kernel/net/ipv4/tunnel4.ko
insmod $KMOD_PATH/kernel/net/ipv4/ip_tunnel.ko
insmod $KMOD_PATH/kernel/net/wireguard/wireguard.ko
echo "Wireguard enabled"
fi
if [[ "$ENABLE_CIFS" == "true" ]]; then
insmod $KMOD_PATH/kernel/fs/cifs/cifs.ko
echo "CIFS enabled"
fi
if [[ "$ENABLE_USB_STORAGE" == "true" ]]; then
insmod $KMOD_PATH/kernel/drivers/scsi/scsi_mod.ko
insmod $KMOD_PATH/kernel/drivers/scsi/sd_mod.ko
insmod $KMOD_PATH/kernel/drivers/usb/storage/usb-storage.ko
echo "usb_storage enabled"
fi
if [[ "$ENABLE_EXT4" == "true" ]]; then
if [ -f /opt/wz_mini/tmp/.T20 ]; then
insmod $KMOD_PATH/kernel/lib/crc16.ko
fi
insmod $KMOD_PATH/kernel/fs/jbd2/jbd2.ko
insmod $KMOD_PATH/kernel/fs/mbcache.ko
insmod $KMOD_PATH/kernel/fs/ext4/ext4.ko
echo "ext4 support enabled"
fi
if [[ "$BONDING_ENABLED" == "true" ]]; then
if [[ "$BONDING_LINK_MONITORING_FREQ_MS" == "" ]]; then
BONDING_LINK_MONITORING_FREQ_MS="100"
fi
if [[ "$BONDING_DOWN_DELAY_MS" == "" ]]; then
BONDING_DOWN_DELAY_MS="5000"
fi
if [[ "$BONDING_UP_DELAY_MS" == "" ]]; then
BONDING_UP_DELAY_MS="5000"
fi
if [[ "$BONDING_PRIMARY_INTERFACE" == "" ]]; then
BONDING_PRIMARY_INTERFACE="eth0"
fi
if [[ "$BONDING_SECONDARY_INTERFACE" == "" ]]; then
BONDING_SECONDARY_INTERFACE="wlan0"
fi
if [[ "$BONDING_FAIL_OVER_MAC" == "" ]]; then
BONDING_FAIL_OVER_MAC="0"
fi
echo "Insert the bonding driver into the kernel"
insmod $KMOD_PATH/kernel/drivers/net/bonding/bonding.ko mode=active-backup miimon="$BONDING_LINK_MONITORING_FREQ_MS" downdelay="$BONDING_DOWN_DELAY_MS" updelay="$BONDING_UP_DELAY_MS" primary="$BONDING_PRIMARY_INTERFACE" fail_over_mac="$BONDING_FAIL_OVER_MAC"
echo "Network bonding enabled"
fi
;;
*)
echo "Usage: $0 {start}"
exit 1
;;
esac

View File

@ -0,0 +1,52 @@
#!/bin/sh
### BEGIN INIT INFO
# Provides:
# Short-Description: Backup critical device files
# Description: Backup /configs and /params directory, these files are unique to the device, and if lost the camera is unusable.
### END INIT INFO
. /opt/wz_mini/wz_mini.conf
case "$1" in
start)
echo "#####$(basename "$0")#####"
if [ -d /opt/.wz_backup ]; then
echo "Factory config backup directory missing"
else
echo "Creating factory config backup directory"
mkdir /opt/.wz_backup
fi
if [ -f /opt/wz_mini/tmp/.T31 ]; then
echo "T31 platform backup"
if [ -d /opt/.wz_backup/configs ]; then
echo "Factory configs backup directory present, not backing up again"
else
echo "Backup /configs"
cp -R /configs/ /opt/.wz_backup/
fi
elif [ -f /opt/wz_mini/tmp/.T20 ]; then
echo "T20 platform backup"
if [ -d /opt/.wz_backup/configs ]; then
echo "Factory configs backup directory present, not backing up again"
else
echo "Backup /configs"
cp -R /configs/ /opt/.wz_backup/
fi
if [ -d /opt/.wz_backup/params ]; then
echo "Factory params backup directory present, not backing up again"
else
echo "Backup /params"
cp -R /params/ /opt/.wz_backup/
fi
fi
;;
*)
echo "Usage: $0 {start}"
exit 1
;;
esac

View File

@ -0,0 +1,23 @@
#!/bin/sh
### BEGIN INIT INFO
# Provides:
# Short-Description: Start ssh daemon
# Description: Run the dropbear ssh daemon
### END INIT INFO
. /opt/wz_mini/wz_mini.conf
case "$1" in
start)
echo "#####$(basename "$0")#####"
echo "Running dropbear ssh server"
/opt/wz_mini/bin/dropbear -R -s -g
;;
*)
echo "Usage: $0 {start}"
exit 1
;;
esac

View File

@ -0,0 +1,27 @@
#!/bin/sh
### BEGIN INIT INFO
# Provides:
# Short-Description: Check for terminfo directory
# Description: Provide the proper terminfo files for nano and shells
### END INIT INFO
. /opt/wz_mini/wz_mini.conf
case "$1" in
start)
echo "#####$(basename "$0")#####"
if [ -d /opt/wz_mini/usr/share/terminfo ]; then
echo "Terminfo already present"
else
echo "Terminfo not present, extract"
tar xf /opt/wz_mini/usr/share/terminfo.tar -C /opt/wz_mini/usr/share/
fi
;;
*)
echo "Usage: $0 {start}"
exit 1
;;
esac

View File

@ -0,0 +1,26 @@
#!/bin/sh
### BEGIN INIT INFO
# Provides:
# Short-Description: Disable factorycheck
# Description: On T31 devices, we must disable factory check to prevent it from unmounting our binds.
### END INIT INFO
. /opt/wz_mini/wz_mini.conf
case "$1" in
start)
echo "#####$(basename "$0")#####"
if [ -f /opt/wz_mini/tmp/.T31 ]; then
mount --bind /opt/wz_mini/bin/factorycheck /system/bin/factorycheck
touch /tmp/usrflag
echo "Replace factorycheck with dummy, to prevent bind unmount"
fi
;;
*)
echo "Usage: $0 {start}"
exit 1
;;
esac

205
SD_ROOT/wz_mini/etc/init.d/wz_init.sh Executable file → Normal file
View File

@ -1,5 +1,10 @@
#!/bin/sh #!/bin/sh
#init.d/ = early boot, before inittab is run
#rc.d/ = runs after /linuxrc, but before app_init.sh
#network.d/ runs after app_init.sh, and after wlan hw is ready
#rc.local.d/ = runs after app_init.sh and network has acquired an address
###This file is run by switch_root, from the initramfs in the kernel. ###This file is run by switch_root, from the initramfs in the kernel.
LOG_NAME=/opt/wz_mini/log/wz_init LOG_NAME=/opt/wz_mini/log/wz_init
if [[ -e $LOG_NAME.log || -L $LOG_NAME.log ]] ; then if [[ -e $LOG_NAME.log || -L $LOG_NAME.log ]] ; then
@ -13,10 +18,6 @@ fi
touch -- "$LOG_NAME".log touch -- "$LOG_NAME".log
exec 1> $LOG_NAME.log 2>&1 exec 1> $LOG_NAME.log 2>&1
export WZMINI_CFG=/opt/wz_mini/wz_mini.conf
[ -f $WZMINI_CFG ] && source $WZMINI_CFG
echo "welcome to wz_init.sh" echo "welcome to wz_init.sh"
echo "PID $$" echo "PID $$"
@ -31,182 +32,28 @@ echo '
|______| |______|
' '
set -x # Start all init scripts in /etc/init.d
# executing them in numerical order.
#
for i in /opt/wz_mini/etc/init.d/S??* ;do
echo "replace stock busybox" # Ignore dangling symlinks (if any).
mount --bind /opt/wz_mini/bin/busybox /bin/busybox [ ! -f "$i" ] && continue
echo "replace stock fstab" case "$i" in
mount --bind /opt/wz_mini/etc/fstab /etc/fstab *.sh)
# Source shell script for speed.
echo "mount wz_mini tmpfs" (
mount -t tmpfs /opt/wz_mini/tmp trap - INT QUIT TSTP
set start
echo "install busybox applets" . $i
mkdir /opt/wz_mini/tmp/.bin )
/opt/wz_mini/bin/busybox --install -s /opt/wz_mini/tmp/.bin ;;
*)
##DETECT CAMERA MODEL & PLATFORM TYPE # No sh extension, so fork subprocess.
#V2=WYZEC1-JZ $i start
#PANv1=WYZECP1_JEF ;;
#PANv2=HL_PAN2 esac
#V3=WYZE_CAKP2JFUS done
#DB3=WYZEDB3
#V3C=ATOM_CamV3C
#mtdblock9 only exists on the T20 platform, indicating V2 or PANv1
if [ -b /dev/mtdblock9 ]; then
mkdir /opt/wz_mini/tmp/params
mount -t jffs2 /dev/mtdblock9 /opt/wz_mini/tmp/params
touch /opt/wz_mini/tmp/.$(cat /opt/wz_mini/tmp/params/config/.product_config | grep PRODUCT_MODEL | sed -e 's#.*=\(\)#\1#')
touch /opt/wz_mini/tmp/.T20
umount /opt/wz_mini/tmp/params
rm -rf /opt/wz_mini/tmp/params
elif [ -b /dev/mtdblock6 ]; then
mkdir /opt/wz_mini/tmp/configs
mount -t jffs2 /dev/mtdblock6 /opt/wz_mini/tmp/configs
touch /opt/wz_mini/tmp/.$(cat /opt/wz_mini/tmp/configs/.product_config | grep PRODUCT_MODEL | sed -e 's#.*=\(\)#\1#')
touch /opt/wz_mini/tmp/.T31
umount /opt/wz_mini/tmp/configs
rm -rf /opt/wz_mini/tmp/configs
fi
#Set the correct GPIO for the audio driver (T31 only)
if [ -f /opt/wz_mini/tmp/.HL_PAN2 ]; then
GPIO=7
elif [ -f /opt/wz_mini/tmp/.WYZE_CAKP2JFUS ]; then
GPIO=63
fi
if [ -e /opt/wz_mini/etc/.first_boot ]; then
echo "first boot already completed"
else
echo "first boot, initializing"
if [ -f /opt/wz_mini/tmp/.T20 ]; then
#May need different gpio for PANv1
#We don't rmmod this module, as it is marked [permanent] by the kernel on T20
insmod /opt/wz_mini/lib/modules/3.10.14/extra/audio.ko sign_mode=0
LD_LIBRARY_PATH='/opt/wz_mini/lib' /opt/wz_mini/bin/audioplay_t20 /opt/wz_mini/usr/share/audio/init_v2.wav $AUDIO_PROMPT_VOLUME
else
insmod /opt/wz_mini/lib/modules/3.10.14__isvp_swan_1.0__/extra/audio.ko spk_gpio=$GPIO alc_mode=0 mic_gain=0
/opt/wz_mini/bin/audioplay_t31 /opt/wz_mini/usr/share/audio/init.wav $AUDIO_PROMPT_VOLUME
rmmod audio
fi
fi
if [ -f /opt/wz_mini/etc/.first_boot ]; then
echo "Not first_boot"
else
echo "Set first_boot"
touch /opt/wz_mini/etc/.first_boot
fi
echo "replace stock inittab"
mount --bind /opt/wz_mini/etc/inittab /etc/inittab
echo "bind /etc/profile for local/ssh shells"
mount --bind /opt/wz_mini/etc/profile /etc/profile
echo "mounting global tmpfs"
mount -t tmpfs /tmp
echo "mount system to replace factorycheck with dummy, to prevent bind unmount"
if [ -f /opt/wz_mini/tmp/.T31 ]; then
mount /dev/mtdblock3 /system
mount --bind /opt/wz_mini/bin/factorycheck /system/bin/factorycheck
fi
touch /tmp/usrflag
echo "create workspace directory"
mkdir /opt/wz_mini/tmp/.storage
echo "copy stock rcS"
cp /etc/init.d/rcS /opt/wz_mini/tmp/.storage/rcS
echo "add wz_post inject to stock rcS"
sed -i '/^".*/aset -x' /opt/wz_mini/tmp/.storage/rcS
sed -i '/^# Run init script.*/i/opt/wz_mini/etc/init.d/wz_post.sh\n' /opt/wz_mini/tmp/.storage/rcS
sed -i '/sbin:/s/$/:\/opt\/wz_mini\/bin/' /opt/wz_mini/tmp/.storage/rcS
sed -i '/system\/\lib/s/$/:\/opt\/wz_mini\/lib/' /opt/wz_mini/tmp/.storage/rcS
#Custom PATH hooks
#sed -i '/^# Run init script.*/i#Hook Library PATH here\nexport LD_LIBRARY_PATH=/tmp/test/lib:$LD_LIBRARY_PATH\n' /opt/wz_mini/tmp/.storage/rcS
#sed -i '/^# Run init script.*/i#Hook system PATH here\nexport PATH=/tmp/test/bin:$PATH\n' /opt/wz_mini/tmp/.storage/rcS
if [ -f /opt/wz_mini/tmp/.T20 ]; then
mount -t jffs2 /dev/mtdblock4 /system
fi
#Check for Car FW
if [ -f /opt/wz_mini/tmp/.WYZEC1-JZ ]; then
if cat /system/bin/app.ver | grep 4.55; then
touch /opt/wz_mini/tmp/.CAR
fi
fi
echo "Copy factory app_init.sh"
cp /system/init/app_init.sh /opt/wz_mini/tmp/.storage/app_init.sh
echo "Replace factory app_init.sh path"
sed -i '/\/system\/init\/app_init.sh/,+4d' /opt/wz_mini/tmp/.storage/rcS
sed -i '/Run init script.*/a /opt/wz_mini/tmp/.storage/app_init.sh\n' /opt/wz_mini/tmp/.storage/rcS
sed -i '/\/system\/init\/app_init.sh/,+2d' /opt/wz_mini/tmp/.storage/rcS
echo "replace stock password"
cp /opt/wz_mini/etc/shadow /opt/wz_mini/tmp/.storage/shadow
if [[ "$DEBUG_PASSWORD" == "true" ]]; then
sed -i 's/:[^:]*/:/' /opt/wz_mini/tmp/.storage/shadow
fi
mount --bind /opt/wz_mini/tmp/.storage/shadow /etc/shadow
chmod 400 /etc/shadow
if [[ -e /opt/wz_mini/swap.gz ]]; then
if [ -f /opt/wz_mini/tmp/.T20 ]; then
LD_LIBRARY_PATH='/opt/wz_mini/lib' /opt/wz_mini/bin/audioplay_t20 /opt/wz_mini/usr/share/audio/swap_v2.wav $AUDIO_PROMPT_VOLUME
else
insmod /opt/wz_mini/lib/modules/3.10.14__isvp_swan_1.0__/extra/audio.ko spk_gpio=$GPIO alc_mode=0 mic_gain=0
/opt/wz_mini/bin/audioplay_t31 /opt/wz_mini/usr/share/audio/swap.wav $AUDIO_PROMPT_VOLUME
rmmod audio
fi
echo "swap archive present, extracting"
gzip -d /opt/wz_mini/swap.gz
mkswap /opt/wz_mini/swap
sync;echo 3 > /proc/sys/vm/drop_caches
else
echo "swap archive missing, not extracting"
fi
if [ -d /opt/wz_mini/usr/share/terminfo ]; then
echo "terminfo already present"
else
echo "terminfo not present, extract"
tar xf /opt/wz_mini/usr/share/terminfo.tar -C /opt/wz_mini/usr/share/
fi
echo "Run dropbear ssh server"
/opt/wz_mini/bin/dropbear -R -s -g
if [[ "$DEBUG_ENABLED" == "true" ]]; then
sed -i '/app_init.sh/,+4d' /opt/wz_mini/tmp/.storage/rcS
sed -i '/^# Run init/i/bin/sh /etc/profile' /opt/wz_mini/tmp/.storage/rcS
touch /tmp/dbgflag
elif [[ "$WEB_CAM_ENABLE" == "true" ]]; then
sed -i '/app_init.sh/,+4d' /opt/wz_mini/tmp/.storage/rcS
sed -i '/^# Run init/i/opt/wz_mini/etc/init.d/wz_cam.sh &' /opt/wz_mini/tmp/.storage/rcS
touch /tmp/dbgflag
elif [[ -d /opt/Upgrade ]]; then
sed -i '/app_init.sh/,+4d' /opt/wz_mini/tmp/.storage/rcS
sed -i '/^# Run init/i/bin/sh /etc/profile' /opt/wz_mini/tmp/.storage/rcS
sed -i '/^# Mount configs.*/i/opt/wz_mini/bin/upgrade-run.sh &\n' /opt/wz_mini/tmp/.storage/rcS
touch /tmp/dbgflag
fi
/linuxrc /linuxrc

View File

@ -1,153 +0,0 @@
#!/bin/sh
### This file is called by /etc/init.d/rcS, and is run before app_init.sh
LOG_NAME=/opt/wz_mini/log/wz_post
if [[ -e $LOG_NAME.log || -L $LOG_NAME.log ]] ; then
i=0
while [[ -e $LOG_NAME.log.$i || -L $LOG_NAME.log.$i ]] ; do
let i++
done
mv $LOG_NAME.log $LOG_NAME.log.$i
LOG_NAME=$LOG_NAME
fi
touch -- "$LOG_NAME".log
exec 1> $LOG_NAME.log 2>&1
set -x
if [ -e /tmp/dbgflag ];then
echo "debug mode, disabled"
exit 0
fi
export WZMINI_CFG=/opt/wz_mini/wz_mini.conf
[ -f $WZMINI_CFG ] && source $WZMINI_CFG
echo "welcome to wz_post.sh"
echo "PID $$"
#CAMERA CONFIGURATION FILES BACKUP
if [ -d /opt/.wz_backup ]; then
echo "backup directory missing"
else
echo "creating backup directory"
mkdir /opt/.wz_backup
fi
if [ -f /opt/wz_mini/tmp/.T31 ]; then
echo "T31 platform backup"
if [ -d /opt/.wz_backup/configs ]; then
echo "configs backup directory present, not backing up again"
else
echo "backup /configs"
cp -R /configs/ /opt/.wz_backup/
fi
elif [ -f /opt/wz_mini/tmp/.T20 ]; then
echo "T20 platform backup"
if [ -d /opt/.wz_backup/configs ]; then
echo "configs backup directory present, not backing up again"
else
echo "backup /configs"
cp -R /configs/ /opt/.wz_backup/
fi
if [ -d /opt/.wz_backup/params ]; then
echo "configs backup directory present, not backing up again"
else
echo "backup /params"
cp -R /params/ /opt/.wz_backup/
fi
fi
#SWAP FILE, REQUIRED FOR OPERATION!
if [[ "$ENABLE_SWAP" == "true" ]] && [[ -e /opt/wz_mini/swap ]]; then
echo "swap file found, enable"
swapon /opt/wz_mini/swap
else
echo "swap file missing"
fi
if [ -d /lib/modules ]; then
echo "mount kernel modules"
mount --bind /opt/wz_mini/lib/modules /lib/modules
fi
## REPLACE STOCK MODULES
if [[ "$ENABLE_RTL8189FS_DRIVER" == "true" ]] || [[ "$ENABLE_RTL8189FS_DRIVER" == "" ]]; then
echo "Enable 8189fs"
if [ -f /opt/wz_mini/tmp/.WYZEC1-JZ ]; then
sed -i 's/\/driver\/rtl8189ftv.ko/\/opt\/wz_mini\/lib\/modules\/3.10.14\/extra\/8189fs.ko rtw_power_mgnt=0 rtw_enusbss=0 rtw_drv_log_level=0/g' /opt/wz_mini/tmp/.storage/app_init.sh
elif [ -f /opt/wz_mini/tmp/.WYZECP1_JEF ]; then
sed -i 's/insmod \/driver\/8189es.ko/insmod \/opt\/wz_mini\/lib\/modules\/3.10.14\/extra\/8189es.ko rtw_power_mgnt=0 rtw_enusbss=0 rtw_drv_log_level=0/g' /opt/wz_mini/tmp/.storage/app_init.sh
elif [ -f /opt/wz_mini/tmp/.WYZE_CAKP2JFUS ]; then
sed -i 's/\/system\/driver\/rtl8189ftv.ko/\/opt\/wz_mini\/lib\/modules\/3.10.14\_\_isvp_swan_1.0\_\_\/extra\/8189fs.ko rtw_power_mgnt=0 rtw_enusbss=0 rtw_drv_log_level=0/g' /opt/wz_mini/tmp/.storage/app_init.sh
elif [ -f /opt/wz_mini/tmp/.ATOM_CamV3C ]; then
sed -i 's/\/system\/driver\/rtl8189ftv.ko/\/opt\/wz_mini\/lib\/modules\/3.10.14\_\_isvp_swan_1.0\_\_\/extra\/8189fs.ko rtw_power_mgnt=0 rtw_enusbss=0 rtw_drv_log_level=0/g' /opt/wz_mini/tmp/.storage/app_init.sh
fi
fi
if [[ "$ENABLE_ATBM603X_DRIVER" == "true" ]] || [[ "$ENABLE_ATBM603X_DRIVER" == "" ]]; then
echo "Enable atbm603x_wifi_sdio"
if [ -f /opt/wz_mini/tmp/.ATOM_CamV3C ]; then
sed -i 's/\/thirdlib\/atbm603x_wifi_sdio.ko/\/opt\/wz_mini\/lib\/modules\/3.10.14\_\_isvp_swan_1.0\_\_\/extra\/atbm603x_wifi_sdio.ko atbm_printk_mask=0/g' /opt/wz_mini/tmp/.storage/app_init.sh
elif [ -f /opt/wz_mini/tmp/.T31 ] && ! [ -f /opt/wz_mini/tmp/.ATOM_CamV3C ]; then
sed -i 's/\/system\/driver\/atbm603x_wifi_sdio.ko/\/opt\/wz_mini\/lib\/modules\/3.10.14\_\_isvp_swan_1.0\_\_\/extra\/atbm603x_wifi_sdio.ko atbm_printk_mask=0/g' /opt/wz_mini/tmp/.storage/app_init.sh
fi
fi
##ENABLE LIBCALLBACK BY DEFAULT
if [[ "$LIBCALLBACK_ENABLE" == "true" ]] || ([[ "$RTSP_HI_RES_ENABLED" == "true" ]] || [[ "$RTSP_LOW_RES_ENABLED" == "true" ]]); then
echo "set path for iCamera"
sed -i 's/\/system\/bin\/iCamera/\/opt\/wz_mini\/usr\/bin\/iCamera/g' /opt/wz_mini/tmp/.storage/app_init.sh
fi
#RTSP SERVER
if ([[ "$RTSP_HI_RES_ENABLED" == "true" ]] || [[ "$RTSP_LOW_RES_ENABLED" == "true" ]]) && ! [[ -e /tmp/dbgflag ]]; then
if [[ "$RTSP_LOW_RES_ENABLED" == "true" ]] && [[ "$RTSP_HI_RES_ENABLED" == "true" ]]; then
if [ -f /opt/wz_mini/tmp/.T20 ]; then
echo "load video loopback driver at video6 video7"
insmod /opt/wz_mini/lib/modules/3.10.14/extra/v4l2loopback_V2.ko video_nr=6,7
else
echo "load video loopback driver at video1 video2"
insmod /opt/wz_mini/lib/modules/3.10.14__isvp_swan_1.0__/extra/v4l2loopback.ko video_nr=1,2
fi
elif [[ "$RTSP_LOW_RES_ENABLED" == "true" ]]; then
if [ -f /opt/wz_mini/tmp/.T20 ]; then
echo "load video loopback driver at video7"
insmod /opt/wz_mini/lib/modules/3.10.14/extra/v4l2loopback_V2.ko video_nr=7
else
echo "load video loopback driver at video2"
insmod /opt/wz_mini/lib/modules/3.10.14__isvp_swan_1.0__/extra/v4l2loopback.ko video_nr=2
fi
elif [[ "$RTSP_HI_RES_ENABLED" == "true" ]]; then
if [ -f /opt/wz_mini/tmp/.T20 ]; then
echo "load video loopback driver at video6"
insmod /opt/wz_mini/lib/modules/3.10.14/extra/v4l2loopback_V2.ko video_nr=6
else
echo "load video loopback driver at video1"
insmod /opt/wz_mini/lib/modules/3.10.14__isvp_swan_1.0__/extra/v4l2loopback.ko video_nr=1
fi
fi
fi
#MOTORIZED CAMERA CONTROL
if [[ "$DISABLE_MOTOR" == "true" ]]; then
echo "Motor Disabled"
touch /opt/wz_mini/tmp/.ms
fi
#Enable serial driver for car
if [ -f /opt/wz_mini/tmp/.CAR ] || [[ "$ENABLE_CAR_DRIVER" == "true" ]]; then
modprobe cp210x
fi
/opt/wz_mini/etc/init.d/wz_user.sh &
##LIBRARY DEBUG
#cp /opt/wz_mini/lib/uClibc.tar /tmp
#tar -xf /tmp/uClibc.tar -C /tmp
#mount --bind /tmp/lib /lib
#cp /system/bin/iCamera /opt/wz_mini/tmp/.storage/
#mount -o ro,bind /opt/wz_mini/usr/bin/iCamera-dbg /system/bin/iCamera

View File

@ -1,625 +0,0 @@
#!/bin/sh
LOG_NAME=/opt/wz_mini/log/wz_user
if [[ -e $LOG_NAME.log || -L $LOG_NAME.log ]] ; then
i=0
while [[ -e $LOG_NAME.log.$i || -L $LOG_NAME.log.$i ]] ; do
let i++
done
mv $LOG_NAME.log $LOG_NAME.log.$i
LOG_NAME=$LOG_NAME
fi
touch -- "$LOG_NAME".log
exec 1> $LOG_NAME.log 2>&1
set -x
echo "welcome to wz_user.sh"
echo "PID $$"
if [[ -e /tmp/dbgflag ]];then
echo "debug mode, disabled"
exit 0
fi
export WZMINI_CFG=/opt/wz_mini/wz_mini.conf
[ -f $WZMINI_CFG ] && source $WZMINI_CFG
hostname_set() {
echo "set hostname"
hostname $CUSTOM_HOSTNAME
}
first_run_check() {
if [ -e /opt/wz_mini/tmp/.wz_user_firstrun ]; then
echo "wz_user.sh already run once, exit."
exit 0
fi
}
store_mac() {
echo "store original mac"
cat /sys/class/net/wlan0/address | tr '[:lower:]' '[:upper:]' > /opt/wz_mini/tmp/wlan0_mac
}
wait_wlan() {
##Check if the driver has been loaded for the onboard wlan0, store the MAC.
while true
do
if ifconfig wlan0 | grep "HWaddr"; then
echo "wlan0 hwaddr is up"
store_mac
break
else
echo "wlan0 hwaddr not ready yet..."
sleep 5
fi
done
}
wpa_check() {
##Check if wpa_supplicant has been created by iCamera
if [ -e /tmp/wpa_supplicant.conf ]; then
wait_wlan
echo "wpa_supplicant.conf ready"
else
echo "wpa_supplicant.conf not ready, wait some time for creation."
COUNT=0
ATTEMPTS=15
until [[ -e /tmp/wpa_supplicant.conf ]] || [[ $COUNT -eq $ATTEMPTS ]]; do
echo -e "$(( COUNT++ ))... \c"
sleep 5
wpa_check
done
if [[ $COUNT -eq $ATTEMPTS ]]; then
echo "time exceeded waiting for iCamera, continue potentially broken condition without network."
fi
fi
}
wlanold_check() {
#Have we renamed interfaces yet?
if [ -d /sys/class/net/wlanold ]; then
echo "wlanold exist"
eth_wlan_up
else
echo "wlanold doesn't exist"
if [[ "$BONDING_ENABLED" == "true" ]] && ([[ "$ENABLE_USB_ETH" == "true" ]] || [[ "$ENABLE_USB_DIRECT" == "true" ]]); then
rename_interface_and_setup_bonding bond0 "$BONDING_PRIMARY_INTERFACE" "$BONDING_SECONDARY_INTERFACE"
else
rename_interface $1
fi
fi
}
netloop() {
##While loop for check
while true
do
wlanold_check $1
echo "wlan0 not ready yet..."
sleep 5
done
}
rename_interface() {
##Fool iCamera by renaming the hardline interface to wlan0
echo "renaming interfaces"
ifconfig $1 down
ifconfig wlan0 down
/opt/wz_mini/bin/busybox ip link set wlan0 name wlanold
/opt/wz_mini/bin/busybox ip addr flush dev wlanold
/opt/wz_mini/bin/busybox ip link set $1 name wlan0
eth_wlan_up
}
rename_interface_and_setup_bonding() {
##Fool iCamera by renaming the hardline interface to wlan0
## $1 Bonding Interface, $2 Primary Interface, $3 Secondary Interface
bonding_interface=$1
primary_interface=$2
secondary_interface=$3
echo "renaming interfaces"
# Bring all interfaces down
ifconfig $bonding_interface down
ifconfig $primary_interface down
ifconfig $secondary_interface down
# Have to bring bonding interface up to be able to bond our slaves.
/opt/wz_mini/bin/busybox ip link set $bonding_interface up
# Rename the real wlan0 interface if needed/used
if [[ "$primary_interface" == "wlan0" ]]; then
/opt/wz_mini/bin/busybox ip link set $primary_interface name wlanold
/opt/wz_mini/bin/busybox ip addr flush dev wlanold
primary_interface="wlanold"
# Because we just changed the name of the primary interface, we need to
# tell the bonding driver about the name change as well.
echo "$primary_interface" > /sys/devices/virtual/net/$bonding_interface/bonding/primary
fi
if [[ "$secondary_interface" == "wlan0" ]]; then
/opt/wz_mini/bin/busybox ip link set $secondary_interface name wlanold
/opt/wz_mini/bin/busybox ip addr flush dev wlanold
secondary_interface="wlanold"
fi
# Enslave the Ethernet and Original Wifi interfaces
# under the bonding interface.
/opt/wz_mini/tmp/.bin/ifenslave $bonding_interface $primary_interface $secondary_interface
# Have to bring bonding interface down to be rename the interface
/opt/wz_mini/bin/busybox ip link set $bonding_interface down
# Name the bonding interface to be the "new" wlan0 interface
/opt/wz_mini/bin/busybox ip link set $bonding_interface name wlan0
# Bring the newly renamed wlan0 (actually the bond interface) back up
eth_wlan_up
}
bonding_setup() {
echo "bonding kernel module setup"
if [[ "$BONDING_ENABLED" == "true" ]]; then
if [[ "$BONDING_LINK_MONITORING_FREQ_MS" == "" ]]; then
BONDING_LINK_MONITORING_FREQ_MS="100"
fi
if [[ "$BONDING_DOWN_DELAY_MS" == "" ]]; then
BONDING_DOWN_DELAY_MS="5000"
fi
if [[ "$BONDING_UP_DELAY_MS" == "" ]]; then
BONDING_UP_DELAY_MS="5000"
fi
if [[ "$BONDING_PRIMARY_INTERFACE" == "" ]]; then
BONDING_PRIMARY_INTERFACE="$1"
fi
if [[ "$BONDING_SECONDARY_INTERFACE" == "" ]]; then
BONDING_SECONDARY_INTERFACE="$2"
fi
if [[ "$BONDING_FAIL_OVER_MAC" == "" ]]; then
BONDING_FAIL_OVER_MAC="0"
fi
# Insert the bonding driver into the kernel
insmod $KMOD_PATH/kernel/drivers/net/bonding/bonding.ko mode=active-backup miimon="$BONDING_LINK_MONITORING_FREQ_MS" downdelay="$BONDING_DOWN_DELAY_MS" updelay="$BONDING_UP_DELAY_MS" primary="$BONDING_PRIMARY_INTERFACE" fail_over_mac="$BONDING_FAIL_OVER_MAC"
fi
}
eth_wlan_up() {
##Run DHCP client, and bind mount our fake wpa_cli.sh to fool iCamera
ifconfig wlan0 up
pkill udhcpc
udhcpc -i wlan0 -x hostname:$CUSTOM_HOSTNAME -p /var/run/udhcpc.pid -b
# If running with Interface Bonding enabled, kill any existing
# wpa_supplicant that might be running and spawn our own instead
if [[ "$BONDING_ENABLED" == "true" ]] && ([[ "$ENABLE_USB_ETH" == "true" ]] || [[ "$ENABLE_USB_DIRECT" == "true" ]]); then
/opt/wz_mini/bin/busybox killall wpa_supplicant
wpa_supplicant -D nl80211 -i wlanold -c /tmp/wpa_supplicant.conf -B -s
fi
if [ -f /opt/wz_mini/tmp/.T20 ]; then
mount -o bind /opt/wz_mini/bin/wpa_cli.sh /system/bin/wpa_cli
else
mount -o bind /opt/wz_mini/bin/wpa_cli.sh /bin/wpa_cli
fi
break
}
swap_enable() {
if [ -e /opt/wz_mini/swap ]; then
echo "Swap file exists"
if cat /proc/swaps | grep "mini" ; then
echo "Swap is already enabled"
else
echo "Enable swap"
swapon /opt/wz_mini/swap
fi
else
echo "Swap file missing!"
fi
}
dmesg_log() {
DMESG_LOG=/opt/wz_mini/log/dmesg
if [[ -e $DMESG_LOG.log || -L $DMESG_LOG.log ]] ; then
i=0
while [[ -e $DMESG_LOG.log.$i || -L $DMESG_LOG.log.$i ]] ; do
let i++
done
mv $DMESG_LOG.log $DMESG_LOG.log.$i
DMESG_LOG=$DMESG_LOG
fi
touch -- "$DMESG_LOG".log
dmesg > $DMESG_LOG.log 2>&1
}
trim_logs() {
echo "Deleting logs older than 5 boots..."
find /opt/wz_mini/log -name '*log*' | while read file; do
[ "${file#/opt/wz_mini/log/*log.}" -gt 5 ] && rm -v "$file"
done
}
first_run_check
wpa_check
#Set module dir depending on platform
if [ -f /opt/wz_mini/tmp/.T20 ]; then
KMOD_PATH="/opt/wz_mini/lib/modules/3.10.14"
else
KMOD_PATH="/opt/wz_mini/lib/modules/3.10.14__isvp_swan_1.0__"
fi
swap_enable
if [[ "$ENABLE_IPV6" == "true" ]]; then
echo "ipv6 enabled"
else
echo "ipv6 disabled"
sysctl -w net.ipv6.conf.all.disable_ipv6=1
fi
if [[ "$ENABLE_NFSv4" == "true" ]]; then
insmod $KMOD_PATH/kernel/lib/oid_registry.ko
insmod $KMOD_PATH/kernel/net/dns_resolver/dns_resolver.ko
insmod $KMOD_PATH/kernel/fs/nfs/nfsv4.ko
insmod $KMOD_PATH/kernel/net/sunrpc/auth_gss/auth_rpcgss.ko
echo nfsv4 enabled
else
echo nfsv4 disabled
fi
if [[ "$ENABLE_IPTABLES" == "true" ]]; then
insmod $KMOD_PATH/kernel/net/netfilter/x_tables.ko
insmod $KMOD_PATH/kernel/net/ipv4/netfilter/ip_tables.ko
insmod $KMOD_PATH/kernel/net/ipv4/netfilter/ipt_REJECT.ko
insmod $KMOD_PATH/kernel/net/ipv4/netfilter/iptable_filter.ko
insmod $KMOD_PATH/kernel/net/ipv4/netfilter/iptable_mangle.ko
echo "iptables ipv4 enabled"
if [[ "$ENABLE_IPV6" == "true" ]]; then
insmod $KMOD_PATH/kernel/net/ipv6/netfilter/ip6_tables.ko
insmod $KMOD_PATH/kernel/net/ipv6/netfilter/ip6t_REJECT.ko
insmod $KMOD_PATH/kernel/net/ipv6/netfilter/ip6table_filter.ko
insmod $KMOD_PATH/kernel/net/ipv6/netfilter/ip6table_mangle.ko
echo "iptables ipv6 enabled"
fi
else
echo "iptables disabled"
fi
if [[ "$ENABLE_USB_ETH" == "true" ]]; then
insmod $KMOD_PATH/kernel/drivers/net/usb/usbnet.ko
# Auto-Detect an Ethernet Driver and load it
if [[ "$ENABLE_USB_ETH_MODULE_AUTODETECT" == "true" ]]; then
for DEVICE in `lsusb | awk '{print $6}'| tr '[:upper:]' '[:lower:]'`; do
case $DEVICE in
'077b:2226' | '0846:1040' | '2001:1a00' | '0b95:1720' | '07b8:420a' |\
'08dd:90ff' | '0557:2009' | '0411:003d' | '0411:006e' | '6189:182d' |\
'0df6:0056' | '07aa:0017' | '1189:0893' | '1631:6200' | '04f1:3008' |\
'17ef:7203' | '0b95:772b' | '0b95:7720' | '0b95:1780' | '0789:0160' |\
'13b1:0018' | '1557:7720' | '07d1:3c05' | '2001:3c05' | '2001:1a02' |\
'1737:0039' | '04bb:0930' | '050d:5055' | '05ac:1402' | '0b95:772a' |\
'14ea:ab11' | '0db0:a877' | '0b95:7e2b' | '0b95:172a' | '066b:20f9')
echo "Loading ASIX Ethernet driver..."
modprobe asix
;;
'0b95:1790' | '0b95:178a' | '0df6:0072')
echo "Loading AX88179 Gigabit Ethernet driver..."
modprobe ax88179_178a
;;
'1004:61aa' | '046d:c11f' | '1410:b001' | '1410:9010' | '413c:8195' |\
'413c:8196' | '413c:819b' | '16d5:650a' | '12d1:14ac')
echo "Loading USB CDC Ethernet driver..."
modprobe cdc_ether
;;
'0bda:8152')
echo "Loading Realtek RTL8152 driver..."
modprobe r8152
;;
esac
done
fi
# Manually load any other Ethernet Drivers if asked for
if [[ "$ENABLE_USB_ETH_MODULE_MANUAL" != "" ]]; then
for i in $(echo "$ENABLE_USB_ETH_MODULE_MANUAL" | tr "," "\n")
do
insmod $KMOD_PATH/kernel/drivers/net/usb/$i.ko
done
fi
bonding_setup eth0 wlan0
swap_enable
netloop eth0
else
echo "USB Ethernet disabled"
fi
if [[ "$ENABLE_USB_DIRECT" == "true" ]]; then
HOST_MACADDR=$(echo "$CUSTOM_HOSTNAME"|md5sum|sed 's/^\(..\)\(..\)\(..\)\(..\)\(..\).*$/02:\1:\2:\3:\4:\5/')
if [ -f /opt/wz_mini/tmp/.T20 ]; then
echo connect > /sys/devices/platform/jz-dwc2/dwc2/udc/dwc2/soft_connect
sleep 1
devmem 0x10000040 32 0x0b800096
sleep 1
devmem 0x13500000 32 0x001100cc
else
#Set dwc2 ID_PIN driver memory
devmem 0x13500000 32 0x001100cc
devmem 0x10000040 32 0x0b000096
#wipe the bits to set the ID_PIN, only for the V3.
devmem 0x10000040 32 0x0b000FFF
fi
insmod $KMOD_PATH/kernel/drivers/usb/gadget/libcomposite.ko
if [ -f /opt/wz_mini/tmp/.T31 ]; then
insmod /opt/wz_mini/lib/modules/3.10.14__isvp_swan_1.0__/kernel/drivers/usb/gadget/u_ether.ko
insmod /opt/wz_mini/lib/modules/3.10.14__isvp_swan_1.0__/kernel/drivers/usb/gadget/usb_f_ncm.ko
fi
insmod $KMOD_PATH/kernel/drivers/usb/gadget/g_ncm.ko iManufacturer=wz_mini_ncm host_addr="$HOST_MACADDR" dev_addr="$USB_DIRECT_MAC_ADDR"
sleep 1
bonding_setup usb0 wlan0
swap_enable
netloop usb0
else
echo "USB Direct disabled"
fi
if [[ "$ENABLE_USB_RNDIS" == "true" ]]; then
if [[ "$ENABLE_USB_ETH" == "true" ]] || [[ "$ENABLE_USB_DIRECT" == "true" ]]; then
echo "RNDIS is not compatible with ENABLE_USB_ETH or ENABLE_USB_DIRECT. Please enable only ENABLE_USB_RNDIS"
else
insmod $KMOD_PATH/kernel/drivers/net/usb/usbnet.ko
insmod $KMOD_PATH/kernel/drivers/net/usb/cdc_ether.ko
insmod $KMOD_PATH/kernel/drivers/net/usb/rndis_host.ko
sleep 1
swap_enable
netloop usb0
fi
else
echo "usb rndis disabled"
fi
if [[ "$ENABLE_WIREGUARD" == "true" ]]; then
insmod $KMOD_PATH/kernel/net/ipv4/tunnel4.ko
insmod $KMOD_PATH/kernel/net/ipv4/ip_tunnel.ko
insmod $KMOD_PATH/kernel/net/wireguard/wireguard.ko
if [[ "$WIREGUARD_IPV4" != "" ]]; then
if [ -d /opt/wz_mini/etc/wireguard ]; then
echo "wireguard dir exists"
else
mkdir -p /opt/wz_mini/etc/wireguard
fi
if [ ! -f /opt/wz_mini/etc/wireguard/privatekey ]; then
(umask 277 && /opt/wz_mini/bin/wg genkey | /opt/wz_mini/bin/busybox tee /opt/wz_mini/etc/wireguard/privatekey | /opt/wz_mini/bin/wg pubkey > /opt/wz_mini/etc/wireguard/publickey)
fi
/opt/wz_mini/bin/busybox ip link add dev wg0 type wireguard
/opt/wz_mini/bin/busybox ip address add dev wg0 "$WIREGUARD_IPV4"
/opt/wz_mini/bin/wg set wg0 private-key /opt/wz_mini/etc/wireguard/privatekey
/opt/wz_mini/bin/busybox ip link set wg0 up
fi
if [[ "$WIREGUARD_PEER_PUBLIC_KEY" != "" ]] && [[ "$WIREGUARD_PEER_ALLOWED_IPS" != "" ]] && [[ "$WIREGUARD_PEER_ENDPOINT" != "" ]] && [[ "$WIREGUARD_PEER_KEEP_ALIVE" != "" ]]; then
/opt/wz_mini/bin/wg set wg0 peer "$WIREGUARD_PEER_PUBLIC_KEY" allowed-ips "$WIREGUARD_PEER_ALLOWED_IPS" endpoint "$WIREGUARD_PEER_ENDPOINT" persistent-keepalive "$WIREGUARD_PEER_KEEP_ALIVE"
/opt/wz_mini/bin/busybox ip route add "$WIREGUARD_PEER_ALLOWED_IPS" dev wg0
fi
else
echo "wireguard disabled"
fi
if [[ "$ENABLE_CIFS" == "true" ]]; then
insmod $KMOD_PATH/kernel/fs/cifs/cifs.ko
else
echo "cifs disabled"
fi
if [[ "$ENABLE_USB_STORAGE" == "true" ]]; then
insmod $KMOD_PATH/kernel/drivers/scsi/scsi_mod.ko
insmod $KMOD_PATH/kernel/drivers/scsi/sd_mod.ko
insmod $KMOD_PATH/kernel/drivers/usb/storage/usb-storage.ko
else
echo "usb_storage disabled"
fi
if [[ "$ENABLE_EXT4" == "true" ]]; then
if [ -f /opt/wz_mini/tmp/.T20 ]; then
insmod $KMOD_PATH/kernel/lib/crc16.ko
fi
insmod $KMOD_PATH/kernel/fs/jbd2/jbd2.ko
insmod $KMOD_PATH/kernel/fs/mbcache.ko
insmod $KMOD_PATH/kernel/fs/ext4/ext4.ko
else
echo "ext4 disabled"
fi
if [[ "$DISABLE_FW_UPGRADE" == "true" ]]; then
mkdir /tmp/Upgrade
mount -t tmpfs -o size=1,nr_inodes=1 none /tmp/Upgrade
#Setting this host causes iCamera to segfault, lets ignore it for now
#echo -e "127.0.0.1 localhost \n127.0.0.1 wyze-upgrade-service.wyzecam.com" > /opt/wz_mini/tmp/.storage/hosts
#mount --bind /opt/wz_mini/tmp/.storage/hosts /etc/hosts
/opt/wz_mini/bin/busybox inotifyd /opt/wz_mini/usr/bin/watch_up.sh /tmp:n > /dev/null 2>&1 &
else
mkdir /tmp/Upgrade
/opt/wz_mini/bin/busybox inotifyd /opt/wz_mini/usr/bin/watch_up.sh /tmp:n > /dev/null 2>&1 &
fi
if [[ "$REMOTE_SPOTLIGHT" == "true" ]]; then
/opt/wz_mini/bin/socat pty,link=/dev/ttyUSB0,raw tcp:"$REMOTE_SPOTLIGHT_HOST":9000 &
echo "remote accessory enabled"
else
echo "remote accessory disabled"
fi
if [[ "$ENABLE_MP4_WRITE" == "true" ]]; then
if [ -f /opt/wz_mini/tmp/.T20 ]; then
echo "mp4_write is not supported on T20"
else
/opt/wz_mini/bin/cmd mp4write on
echo "mp4_write enabled"
fi
else
echo "mp4 write disabled"
fi
if [[ "$RTSP_HI_RES_ENABLED" == "true" ]]; then
if [ -f /opt/wz_mini/tmp/.T20 ]; then
HI_VIDEO_DEV="/dev/video6"
else
HI_VIDEO_DEV="/dev/video1"
fi
swap_enable
if [[ "$RTSP_PASSWORD" = "" ]]; then
RTSP_PASSWORD=$(cat /opt/wz_mini/tmp/wlan0_mac)
fi
/opt/wz_mini/bin/cmd video 0 on
if [[ "$RTSP_HI_RES_ENABLE_AUDIO" == "true" ]]; then
/opt/wz_mini/bin/cmd audio 0 on
AUDIO_CH="-C 1"
AUDIO_FMT="-a S16_LE"
DEVICE1="$HI_VIDEO_DEV,hw:0,0"
else
DEVICE1="$HI_VIDEO_DEV"
echo "rtsp audio disabled"
fi
else
echo "rtsp disabled"
fi
if [[ "$RTSP_LOW_RES_ENABLED" == "true" ]]; then
if [ -f /opt/wz_mini/tmp/.T20 ]; then
LOW_VIDEO_DEV="/dev/video7"
else
LOW_VIDEO_DEV="/dev/video2"
fi
swap_enable
/opt/wz_mini/bin/cmd video 1 on
if [[ "$RTSP_PASSWORD" = "" ]]; then
RTSP_PASSWORD=$(cat /opt/wz_mini/tmp/wlan0_mac)
fi
if [[ "$RTSP_LOW_RES_ENABLE_AUDIO" == "true" ]]; then
/opt/wz_mini/bin/cmd audio 1 on
AUDIO_CH="-C 1"
AUDIO_FMT="-a S16_LE"
DEVICE2="$LOW_VIDEO_DEV,hw:2,0"
else
DEVICE2="$LOW_VIDEO_DEV"
echo "rtsp audio disabled"
fi
else
echo "rtsp disabled"
fi
if [[ "$RTSP_LOW_RES_ENABLED" == "true" ]] || [[ "$RTSP_HI_RES_ENABLED" == "true" ]]; then
echo "delay RTSP for iCamera"
#This delay is required. Sometimes, if you start the rtsp server too soon, live view will break on the app.
sleep 5
LD_LIBRARY_PATH=/opt/wz_mini/lib /opt/wz_mini/bin/v4l2rtspserver $AUDIO_CH $AUDIO_FMT -F0 -U "$RTSP_LOGIN":"$RTSP_PASSWORD" -P "$RTSP_PORT" $DEVICE1 $DEVICE2 &
sleep 1
echo "Set imp variables via helper"
/opt/wz_mini/usr/bin/imp_helper.sh > /dev/null 2>&1 &
fi
if ([[ "$RTSP_LOW_RES_ENABLED" == "true" ]] || [[ "$RTSP_HI_RES_ENABLED" == "true" ]]) && [[ "$RTMP_STREAM_ENABLED" == "true" ]] && ([[ "$RTSP_LOW_RES_ENABLE_AUDIO" == "true" ]] || [[ "$RTSP_HI_RES_ENABLE_AUDIO" == "true" ]]); then
if [[ "$RTMP_STREAM_DISABLE_AUDIO" == "true" ]]; then
RTMP_AUDIO="no_audio"
fi
echo "delay RTMP server"
#Follow the delay from the RTSP server
sleep 5
/opt/wz_mini/bin/rtmp-stream.sh "$RMTP_STREAM_SERVICE" "$RTMP_AUDIO" &
fi
if [[ "$NIGHT_DROP_DISABLE" == "true" ]]; then
touch /opt/wz_mini/tmp/.nd
fi
if [[ "$ENABLE_LOCAL_DNS" == "true" ]]; then
dnsmasq -C /opt/wz_mini/etc/dnsmasq.conf
rm -f /tmp/resolv.conf
cp /opt/wz_mini/etc/resolv.conf /tmp/resolv.conf
fi
if [[ "$WEB_SERVER_ENABLED" == "true" ]]; then
httpd -p 80 -h /opt/wz_mini/www
fi
hostname_set
touch /opt/wz_mini/tmp/.wz_user_firstrun
pkill -f dumpload #Kill dumpload so it won't waste cpu or ram gathering cores and uploading them when something crashes
sysctl -w kernel.core_pattern='|/bin/false'
dmesg_log
trim_logs
sync;echo 3 > /proc/sys/vm/drop_caches
if [ -f "$CUSTOM_SCRIPT_PATH" ]; then
echo "starting custom script"
$CUSTOM_SCRIPT_PATH &
else
echo "no custom script configured in wz_mini.conf"
fi
echo "searching for custom scripts in /opt/wz_mini/etc/rc.local.d"
if [ -d "${1:-/opt/wz_mini/etc/rc.local.d}" ] ; then
for filename in $(find /opt/wz_mini/etc/rc.local.d/ -name "*.sh" | /opt/wz_mini/bin/busybox sort) ; do
if [ -f "${filename}" ] && [ -x "${filename}" ]; then
echo "running ${filename}"
"${filename}" &
fi
done
fi
echo "finished executing custom scripts from /opt/wz_mini/etc/rc.local.d"
echo "wz_user.sh done" > /dev/kmsg

View File

@ -0,0 +1,25 @@
#!/bin/sh
### BEGIN INIT INFO
# Provides:
# Short-Description: WLAN HW Init check
# Description: Make sure the WLAN hardware is functional and initialized before proceeding.
### END INIT INFO
. /opt/wz_mini/etc/rc.common
case "$1" in
start)
echo "#####$(basename "$0")#####"
#Wait for wlan hardware to be intitialized in app_init.sh, this must be blocking.
#Lets come up with a solution for some cameras with failed wlan hw, someone on reddit mentioned it"
echo "Waiting for wlan hw init"
wait_for_wlan $(basename "$0")
;;
*)
echo "Usage: $0 {start}"
exit 1
;;
esac

View File

@ -0,0 +1,25 @@
#!/bin/sh
### BEGIN INIT INFO
# Provides:
# Short-Description: Enable/Disable IPv6
# Description: Enable/Disable IPv6 based on the user configuration
### END INIT INFO
. /opt/wz_mini/wz_mini.conf
case "$1" in
start)
echo "#####$(basename "$0")#####"
if ! [[ "$ENABLE_IPV6" == "true" ]]; then
sysctl -w net.ipv6.conf.all.disable_ipv6=1
echo "ipv6 disabled"
fi
;;
*)
echo "Usage: $0 {start}"
exit 1
;;
esac

View File

@ -0,0 +1,50 @@
#!/bin/sh
### BEGIN INIT INFO
# Provides:
# Short-Description: Wireguard support
# Description: Enable Wireguard support
### END INIT INFO
. /opt/wz_mini/wz_mini.conf
. /opt/wz_mini/etc/rc.common
case "$1" in
start)
echo "#####$(basename "$0")#####"
if [[ "$ENABLE_WIREGUARD" == "true" ]]; then
if [[ "$WIREGUARD_IPV4" != "" ]]; then
if [ -d /opt/wz_mini/etc/wireguard ]; then
echo "Wireguard dir exists"
else
mkdir -p /opt/wz_mini/etc/wireguard
fi
if [ ! -f /opt/wz_mini/etc/wireguard/privatekey ]; then
(umask 277 && /opt/wz_mini/bin/wg genkey | /opt/wz_mini/bin/busybox tee /opt/wz_mini/etc/wireguard/privatekey | /opt/wz_mini/bin/wg pubkey > /opt/wz_mini/etc/wireguard/publickey)
fi
/opt/wz_mini/bin/busybox ip link add dev wg0 type wireguard
/opt/wz_mini/bin/busybox ip address add dev wg0 "$WIREGUARD_IPV4"
/opt/wz_mini/bin/wg set wg0 private-key /opt/wz_mini/etc/wireguard/privatekey
/opt/wz_mini/bin/busybox ip link set wg0 up
fi
if [[ "$WIREGUARD_PEER_PUBLIC_KEY" != "" ]] && [[ "$WIREGUARD_PEER_ALLOWED_IPS" != "" ]] && [[ "$WIREGUARD_PEER_ENDPOINT" != "" ]] && [[ "$WIREGUARD_PEER_KEEP_ALIVE" != "" ]]; then
/opt/wz_mini/bin/wg set wg0 peer "$WIREGUARD_PEER_PUBLIC_KEY" allowed-ips "$WIREGUARD_PEER_ALLOWED_IPS" endpoint "$WIREGUARD_PEER_ENDPOINT" persistent-keepalive "$WIREGUARD_PEER_KEEP_ALIVE"
/opt/wz_mini/bin/busybox ip route add "$WIREGUARD_PEER_ALLOWED_IPS" dev wg0
fi
else
echo "Wireguard disabled"
fi
;;
*)
echo "Usage: $0 {start}"
exit 1
;;
esac

View File

@ -0,0 +1,25 @@
#!/bin/sh
### BEGIN INIT INFO
# Provides:
# Short-Description: Set system hostname
# Description: Set system hostname
### END INIT INFO
. /opt/wz_mini/wz_mini.conf
case "$1" in
start)
echo "#####$(basename "$0")#####"
echo "Set hostname to $CUSTOM_HOSTNAME"
hostname $CUSTOM_HOSTNAME
;;
*)
echo "Usage: $0 {start}"
exit 1
;;
esac

View File

@ -0,0 +1,34 @@
#!/bin/sh
### BEGIN INIT INFO
# Provides:
# Short-Description: Start daemon at boot time
# Description: Enable service provided by daemon.
### END INIT INFO
. /opt/wz_mini/wz_mini.conf
case "$1" in
start)
echo "#####$(basename "$0")#####"
if [[ "$ENABLE_LOCAL_DNS" == "true" ]]; then
dnsmasq -C /opt/wz_mini/etc/dnsmasq.conf
rm -f /tmp/resolv.conf
cp /opt/wz_mini/etc/resolv.conf /tmp/resolv.conf
echo "dnsmasq enabled"
fi
;;
stop)
pkill dnsmasq
;;
restart)
$0 stop
$0 start
;;
*)
echo "Usage: $0 {start|stop}"
exit 1
;;
esac

View File

@ -0,0 +1,32 @@
#!/bin/sh
### BEGIN INIT INFO
# Provides:
# Short-Description: Basic Web Server
# Description: If enabled, start the httpd web server
### END INIT INFO
. /opt/wz_mini/wz_mini.conf
case "$1" in
start)
echo "#####$(basename "$0")#####"
if [[ "$WEB_SERVER_ENABLED" == "true" ]]; then
httpd -p 80 -h /opt/wz_mini/www
echo "httpd enabled"
fi
;;
stop)
pkill dnsmasq
;;
restart)
$0 stop
$0 start
;;
*)
echo "Usage: $0 {start|stop}"
exit 1
;;
esac

View File

@ -0,0 +1,36 @@
#!/bin/sh
### BEGIN INIT INFO
# Provides:
# Short-Description: Remote USB Accessory Support
# Description: If enabled, support remote usb accessories using socat
### END INIT INFO
. /opt/wz_mini/etc/rc.common
. /opt/wz_mini/wz_mini.conf
remote() {
wait_for_wlan_ip $(basename "$0")
echo "#####$(basename "$0")#####"
if [[ "$REMOTE_SPOTLIGHT" == "true" ]]; then
/opt/wz_mini/bin/socat pty,link=/dev/ttyUSB0,raw tcp:"$REMOTE_SPOTLIGHT_HOST":9000 &
echo "Remote accessory support enabled"
else
echo "Remote accessory support disabled"
fi
}
case "$1" in
start)
remote &
;;
stop)
pkill socat
;;
*)
echo "Usage: $0 {start}"
exit 1
;;
esac

View File

@ -0,0 +1,29 @@
#!/bin/sh
### BEGIN INIT INFO
# Provides:
# Short-Description: Store WLAN HW Address
# Description: Store the WLAN HW Address for use by other scripts
### END INIT INFO
. /opt/wz_mini/etc/rc.common
storemac() {
wait_for_wlan_wpa $(basename "$0")
echo "#####$(basename "$0")#####"
cat /sys/class/net/wlan0/address | tr '[:lower:]' '[:upper:]' > /opt/wz_mini/tmp/wlan0_mac
echo "store original mac"
}
case "$1" in
start)
storemac
;;
*)
echo "Usage: $0 {start}"
exit 1
;;
esac

View File

@ -0,0 +1,129 @@
#!/bin/sh
### BEGIN INIT INFO
# Provides:
# Short-Description: Start RTSP Server
# Description: Provide RTSP Streaming Video over IP
### END INIT INFO
. /opt/wz_mini/wz_mini.conf
RTSP=/opt/wz_mini/log/v4l2rtspserver
if [[ -e $RTSP.log || -L $RTSP.log ]] ; then
i=0
while [[ -e $RTSP.log.$i || -L $RTSP.log.$i ]] ; do
let i++
done
mv $RTSP.log $RTSP.log.$i
RTSP=$RTSP
fi
touch -- "$RTSP".log
case "$1" in
start)
echo "#####$(basename "$0")#####"
if [[ "$RTSP_HI_RES_ENABLED" == "true" ]]; then
if [ -f /opt/wz_mini/tmp/.T20 ]; then
HI_VIDEO_DEV="/dev/video6"
else
HI_VIDEO_DEV="/dev/video1"
fi
if [[ "$RTSP_PASSWORD" = "" ]]; then
RTSP_PASSWORD=$(cat /opt/wz_mini/tmp/wlan0_mac)
fi
echo "Enable video ch 0"
/opt/wz_mini/bin/cmd video 0 on > /dev/null
if [[ "$RTSP_HI_RES_ENABLE_AUDIO" == "true" ]]; then
echo "Enable audio ch 0"
/opt/wz_mini/bin/cmd audio 0 on > /dev/null
AUDIO_CH="-C 1"
AUDIO_FMT="-a S16_LE"
DEVICE1="$HI_VIDEO_DEV,hw:0,0"
else
DEVICE1="$HI_VIDEO_DEV"
echo "rtsp audio disabled"
fi
else
echo "rtsp disabled"
fi
if [[ "$RTSP_LOW_RES_ENABLED" == "true" ]]; then
if [ -f /opt/wz_mini/tmp/.T20 ]; then
LOW_VIDEO_DEV="/dev/video7"
else
LOW_VIDEO_DEV="/dev/video2"
fi
echo "Enable video ch 1"
/opt/wz_mini/bin/cmd video 1 on > /dev/null
if [[ "$RTSP_PASSWORD" = "" ]]; then
RTSP_PASSWORD=$(cat /opt/wz_mini/tmp/wlan0_mac)
fi
if [[ "$RTSP_LOW_RES_ENABLE_AUDIO" == "true" ]]; then
echo "Enable video ch 1"
/opt/wz_mini/bin/cmd audio 1 on > /dev/null
AUDIO_CH="-C 1"
AUDIO_FMT="-a S16_LE"
DEVICE2="$LOW_VIDEO_DEV,hw:2,0"
else
DEVICE2="$LOW_VIDEO_DEV"
echo "rtsp audio disabled"
fi
else
echo "rtsp disabled"
fi
if [[ "$RTSP_LOW_RES_ENABLED" == "true" ]] || [[ "$RTSP_HI_RES_ENABLED" == "true" ]]; then
echo "delay RTSP for iCamera"
#This delay is required. Sometimes, if you start the rtsp server too soon, live view will break on the app.
sleep 5
if [[ "$RTSP_AUTH_DISABLE" == "true" ]]; then
echo "Starting RTSP server"
LD_LIBRARY_PATH=/opt/wz_mini/lib LD_PRELOAD=/system/lib/libsetunbuf.so /opt/wz_mini/bin/v4l2rtspserver $AUDIO_CH $AUDIO_FMT -F0 -P "$RTSP_PORT" $DEVICE1 $DEVICE2 > $RTSP.log 2>&1 &
else
echo "Starting RTSP server"
LD_LIBRARY_PATH=/opt/wz_mini/lib LD_PRELOAD=/system/lib/libsetunbuf.so /opt/wz_mini/bin/v4l2rtspserver $AUDIO_CH $AUDIO_FMT -F0 -U "$RTSP_LOGIN":"$RTSP_PASSWORD" -P "$RTSP_PORT" $DEVICE1 $DEVICE2 > $RTSP.log 2>&1 &
fi
sleep 1
echo "Set imp variables via helper"
/opt/wz_mini/usr/bin/imp_helper.sh > /dev/null 2>&1 &
fi
sync;echo 3 > /proc/sys/vm/drop_caches
;;
stop)
pkill v4l2rtspserver
cmd video 0 off
cmd audio 0 off
cmd video 1 off
cmd audio 1 off
pkill imp_helper.sh
;;
restart)
$0 stop
$0 start
;;
*)
echo "Usage: $0 {start|stop}"
exit 1
;;
esac

View File

@ -0,0 +1,36 @@
#!/bin/sh
### BEGIN INIT INFO
# Provides:
# Short-Description: Start rtsp service
# Description: Enable RTMP Streaming Video
### END INIT INFO
. /opt/wz_mini/wz_mini.conf
case "$1" in
start)
echo "#####$(basename "$0")#####"
if ([[ "$RTSP_LOW_RES_ENABLED" == "true" ]] || [[ "$RTSP_HI_RES_ENABLED" == "true" ]]) && [[ "$RTMP_STREAM_ENABLED" == "true" ]] && ([[ "$RTSP_LOW_RES_ENABLE_AUDIO" == "true" ]] || [[ "$RTSP_HI_RES_ENABLE_AUDIO" == "true" ]]); then
if [[ "$RTMP_STREAM_DISABLE_AUDIO" == "true" ]]; then
RTMP_AUDIO="no_audio"
fi
echo "delay RTMP server"
#Follow the delay from the RTSP server
sleep 5
/opt/wz_mini/bin/rtmp-stream.sh "$RMTP_STREAM_SERVICE" "$RTMP_AUDIO" &
fi
;;
stop)
pkill dnsmasq
;;
restart)
$0 stop
$0 start
;;
*)
echo "Usage: $0 {start|stop}"
exit 1
;;
esac

81
SD_ROOT/wz_mini/etc/rc.common Executable file
View File

@ -0,0 +1,81 @@
#!/bin/sh
source /opt/wz_mini/wz_mini.conf
#Set module dir depending on platform
if [ -f /opt/wz_mini/tmp/.T20 ]; then
KMOD_PATH="/opt/wz_mini/lib/modules/3.10.14"
else
KMOD_PATH="/opt/wz_mini/lib/modules/3.10.14__isvp_swan_1.0__"
fi
if [[ "$ENABLE_USB_ETH" == "true" ]]; then
ALT_IFACE=eth0
elif [[ "$ENABLE_USB_DIRECT" == "true" ]] || [[ "$ENABLE_USB_RNDIS" == "true" ]]; then
ALT_IFACE=usb0
fi
#Set the correct GPIO for the audio driver (T31 only)
if [ -f /opt/wz_mini/tmp/.HL_PAN2 ]; then
GPIO=7
elif [ -f /opt/wz_mini/tmp/.WYZE_CAKP2JFUS ]; then
GPIO=63
fi
wait_for_wlan() {
while true; do
if ifconfig wlan0 | grep "HWaddr" > /dev/null; then
break
fi
echo "$1: Network HW not ready yet, try again in 5 seconds"
sleep 5
done
}
wait_for_wlan_wpa() {
while true; do
if [ -e /tmp/wpa_supplicant.conf ]; then
break
fi
echo "$1: wpa_supplicant not initialized yet, try again in 5 seconds"
sleep 5
done
}
wait_for_wlan_ip() {
while true; do
if ifconfig wlan0 | grep "inet addr" > /dev/null; then
break
fi
echo "$1: IP Address not acquired yet, try again in 5 seconds"
sleep 5
done
}
wait_for_icamera() {
while ! pgrep -f "/system/bin/iCamera" > /dev/null; do
sleep 5
done
}
gateway_supervisor() {
count=0
while [ true ]; do
if ! ping -c1 -W 2 `/opt/wz_mini/bin/busybox ip route | awk '/default/ { print $3 }'` >& /dev/null; then
echo "$1: Unable to reach default route via USB Direct Link, ifdown usb0..."
count=0
ifconfig usb0 down
sleep 10
else
if [[ $count -ne 1 ]]
then
#echo "Connected."
count=1
sleep 5
fi
sleep 1
fi
done
}

View File

@ -0,0 +1,67 @@
#!/bin/sh
. /opt/wz_mini/etc/rc.common
. /opt/wz_mini/wz_mini.conf
if [ -e /tmp/dbgflag ]; then
echo "debug enabled, network.d disabled."
exit 0
fi
wait_for_wlan $(basename "$0")
for i in /opt/wz_mini/etc/network.d/S??* ;do
# Ignore dangling symlinks (if any).
[ ! -f "$i" ] && continue
case "$i" in
*.sh)
# Source shell script for speed.
(
trap - INT QUIT TSTP
set start
. $i
)
;;
*)
# No sh extension, so fork subprocess.
$i start
;;
esac
done
wait_for_wlan_ip $(basename "$0")
for i in /opt/wz_mini/etc/rc.local.d/* ;do
# Ignore dangling symlinks (if any).
[ ! -f "$i" ] && continue
case "$i" in
*.sh)
# Source shell script for speed.
(
trap - INT QUIT TSTP
set start
. $i
)
;;
*)
# No sh extension, so fork subprocess.
$i start
;;
esac
done
if [ -f "$CUSTOM_SCRIPT_PATH" ]; then
echo "Starting custom script"
$CUSTOM_SCRIPT_PATH &
else
echo "No custom script configured in wz_mini.conf"
fi
/opt/wz_mini/etc/rc.d/K15logging
echo "wz_mini done" > /dev/kmsg

View File

@ -16,12 +16,10 @@ export WZMINI_CFG=/opt/wz_mini/wz_mini.conf
[ -f $WZMINI_CFG ] && source $WZMINI_CFG [ -f $WZMINI_CFG ] && source $WZMINI_CFG
set -x
echo "welcome to wz_cam.sh" echo "welcome to wz_cam.sh"
echo "PID $$" echo "PID $$"
if [ -f /opt/wz_mini/tmp/.T31 ]; then if [ -f /opt/wz_mini/tmp/.T31 ]; then
cp /opt/wz_mini/etc/uvc.config /opt/wz_mini/usr/bin/uvc.config cp /opt/wz_mini/etc/uvc.config /opt/wz_mini/usr/bin/uvc.config
@ -49,10 +47,10 @@ echo "PID $$"
sleep 1 sleep 1
#Set dwc2 ID_PIN driver memory echo "Set dwc2 ID_PIN driver memory"
devmem 0x13500000 32 0x001100cc devmem 0x13500000 32 0x001100cc
devmem 0x10000040 32 0x0b000096 devmem 0x10000040 32 0x0b000096
#wipe the bits to set the ID_PIN echo "Wipe dwc2 memory bits to set the ID_PIN"
devmem 0x10000040 32 0x0b000FFF devmem 0x10000040 32 0x0b000FFF
sleep 1 sleep 1

View File

@ -0,0 +1,27 @@
#!/bin/sh
if [ -e /tmp/dbgflag ]; then
echo "debug enabled, rc.d disabled."
exit 0
fi
for i in /opt/wz_mini/etc/rc.d/S??* ;do
# Ignore dangling symlinks (if any).
[ ! -f "$i" ] && continue
case "$i" in
*.sh)
# Source shell script for speed.
(
trap - INT QUIT TSTP
set start
. $i
)
;;
*)
# No sh extension, so fork subprocess.
$i start
;;
esac
done

View File

@ -0,0 +1,23 @@
#!/bin/sh
source /opt/wz_mini/wz_mini.conf
echo "Store dmesg logs"
DMESG_LOG=/opt/wz_mini/log/dmesg
if [[ -e $DMESG_LOG.log || -L $DMESG_LOG.log ]] ; then
i=0
while [[ -e $DMESG_LOG.log.$i || -L $DMESG_LOG.log.$i ]] ; do
let i++
done
mv $DMESG_LOG.log $DMESG_LOG.log.$i
DMESG_LOG=$DMESG_LOG
fi
touch -- "$DMESG_LOG".log
dmesg > $DMESG_LOG.log 2>&1
echo "Deleting logs older than 5 boots..."
find /opt/wz_mini/log -name '*log*' | while read file; do
[ "${file#/opt/wz_mini/log/*log.}" -gt 5 ] && rm -v "$file"
done

View File

@ -0,0 +1,45 @@
#!/bin/sh
### BEGIN INIT INFO
# Provides:
# Short-Description: Extract Swap archive
# Description: Enable required swap file for system. System will crash without it.
### END INIT INFO
. /opt/wz_mini/wz_mini.conf
. /opt/wz_mini/etc/rc.common
case "$1" in
start)
echo "#####$(basename "$0")#####"
if [ -e /opt/wz_mini/swap.gz ]; then
if [ -f /opt/wz_mini/tmp/.T20 ]; then
LD_LIBRARY_PATH='/opt/wz_mini/lib' /opt/wz_mini/bin/audioplay_t20 /opt/wz_mini/usr/share/audio/swap_v2.wav $AUDIO_PROMPT_VOLUME
else
insmod /opt/wz_mini/lib/modules/3.10.14__isvp_swan_1.0__/extra/audio.ko spk_gpio=$GPIO alc_mode=0 mic_gain=0
/opt/wz_mini/bin/audioplay_t31 /opt/wz_mini/usr/share/audio/swap.wav $AUDIO_PROMPT_VOLUME
rmmod audio
fi
echo "Swap archive present, extracting"
gzip -d /opt/wz_mini/swap.gz
mkswap /opt/wz_mini/swap
sync;echo 3 > /proc/sys/vm/drop_caches
else
echo "Swap archive missing, not extracting"
fi
if [[ "$ENABLE_SWAP" == "true" ]] && [[ -e /opt/wz_mini/swap ]]; then
echo "Swap file found, enable"
/opt/wz_mini/bin/busybox swapon /opt/wz_mini/swap
else
echo "Swap file missing"
fi
;;
*)
echo "Usage: $0 {start}"
exit 1
;;
esac

View File

@ -0,0 +1,71 @@
#!/bin/sh
### BEGIN INIT INFO
# Provides:
# Short-Description: USB Ethernet Support
# Description: Enable USB Ethernet adapter support and kernel module
### END INIT INFO
. /opt/wz_mini/etc/rc.common
. /opt/wz_mini/wz_mini.conf
case "$1" in
start)
echo "#####$(basename "$0")#####"
if [[ "$ENABLE_USB_ETH" == "true" ]]; then
insmod $KMOD_PATH/kernel/drivers/net/usb/usbnet.ko
echo "Auto-Detect an Ethernet Driver and load it"
if [[ "$ENABLE_USB_ETH_MODULE_AUTODETECT" == "true" ]]; then
for DEVICE in `lsusb | awk '{print $6}'| tr '[:upper:]' '[:lower:]'`; do
case $DEVICE in
'077b:2226' | '0846:1040' | '2001:1a00' | '0b95:1720' | '07b8:420a' |\
'08dd:90ff' | '0557:2009' | '0411:003d' | '0411:006e' | '6189:182d' |\
'0df6:0056' | '07aa:0017' | '1189:0893' | '1631:6200' | '04f1:3008' |\
'17ef:7203' | '0b95:772b' | '0b95:7720' | '0b95:1780' | '0789:0160' |\
'13b1:0018' | '1557:7720' | '07d1:3c05' | '2001:3c05' | '2001:1a02' |\
'1737:0039' | '04bb:0930' | '050d:5055' | '05ac:1402' | '0b95:772a' |\
'14ea:ab11' | '0db0:a877' | '0b95:7e2b' | '0b95:172a' | '066b:20f9')
echo "Loading ASIX Ethernet driver..."
modprobe asix
;;
'0b95:1790' | '0b95:178a' | '0df6:0072')
echo "Loading AX88179 Gigabit Ethernet driver..."
modprobe ax88179_178a
;;
'1004:61aa' | '046d:c11f' | '1410:b001' | '1410:9010' | '413c:8195' |\
'413c:8196' | '413c:819b' | '16d5:650a' | '12d1:14ac')
echo "Loading USB CDC Ethernet driver..."
modprobe cdc_ether
;;
'0bda:8152')
echo "Loading Realtek RTL8152 driver..."
modprobe r8152
;;
esac
done
fi
echo "Manually load any other Ethernet Drivers if asked for"
if [[ "$ENABLE_USB_ETH_MODULE_MANUAL" != "" ]]; then
for i in $(echo "$ENABLE_USB_ETH_MODULE_MANUAL" | tr "," "\n")
do
insmod $KMOD_PATH/kernel/drivers/net/usb/$i.ko
done
fi
cat /sys/class/net/eth0/address | tr '[:lower:]' '[:upper:]' > /opt/wz_mini/tmp/eth0_mac
else
echo "USB Ethernet disabled"
fi
;;
*)
echo "Usage: $0 {start}"
exit 1
;;
esac

View File

@ -0,0 +1,54 @@
#!/bin/sh
### BEGIN INIT INFO
# Provides:
# Short-Description: USB Direct Networking
# Description: Enable USB Direct Networking kernel modules and support
### END INIT INFO
. /opt/wz_mini/etc/rc.common
. /opt/wz_mini/wz_mini.conf
case "$1" in
start)
echo "#####$(basename "$0")#####"
if [[ "$ENABLE_USB_DIRECT" == "true" ]]; then
HOST_MACADDR=$(echo "$CUSTOM_HOSTNAME"|md5sum|sed 's/^\(..\)\(..\)\(..\)\(..\)\(..\).*$/02:\1:\2:\3:\4:\5/')
if [ -f /opt/wz_mini/tmp/.T20 ]; then
echo connect > /sys/devices/platform/jz-dwc2/dwc2/udc/dwc2/soft_connect
sleep 1
devmem 0x10000040 32 0x0b800096
sleep 1
devmem 0x13500000 32 0x001100cc
else
echo "Set dwc2 ID_PIN driver memory"
devmem 0x13500000 32 0x001100cc
devmem 0x10000040 32 0x0b000096
echo "wipe dwc2 memory bits to set the ID_PIN, only for the V3"
devmem 0x10000040 32 0x0b000FFF
fi
insmod $KMOD_PATH/kernel/drivers/usb/gadget/libcomposite.ko
if [ -f /opt/wz_mini/tmp/.T31 ]; then
insmod /opt/wz_mini/lib/modules/3.10.14__isvp_swan_1.0__/kernel/drivers/usb/gadget/u_ether.ko
insmod /opt/wz_mini/lib/modules/3.10.14__isvp_swan_1.0__/kernel/drivers/usb/gadget/usb_f_ncm.ko
fi
insmod $KMOD_PATH/kernel/drivers/usb/gadget/g_ncm.ko iManufacturer=wz_mini_ncm host_addr="$HOST_MACADDR" dev_addr="$USB_DIRECT_MAC_ADDR"
echo "USB Direct enabled"
else
echo "USB Direct disabled"
fi
;;
*)
echo "Usage: $0 {start}"
exit 1
;;
esac

View File

@ -0,0 +1,35 @@
#!/bin/sh
### BEGIN INIT INFO
# Provides:
# Short-Description: USB RNDIS Tethering Support
# Description: Enable USB RNDIS Tethering kernel modules and support
### END INIT INFO
. /opt/wz_mini/etc/rc.common
. /opt/wz_mini/wz_mini.conf
case "$1" in
start)
if [[ "$ENABLE_USB_RNDIS" == "true" ]]; then
if [[ "$ENABLE_USB_ETH" == "true" ]] || [[ "$ENABLE_USB_DIRECT" == "true" ]]; then
echo "RNDIS is not compatible with ENABLE_USB_ETH or ENABLE_USB_DIRECT. Please enable only ENABLE_USB_RNDIS"
else
insmod $KMOD_PATH/kernel/drivers/net/usb/usbnet.ko
insmod $KMOD_PATH/kernel/drivers/net/usb/cdc_ether.ko
insmod $KMOD_PATH/kernel/drivers/net/usb/rndis_host.ko
fi
echo "USB RNDIS enabled"
else
echo "USB RNDIS disabled"
fi
;;
*)
echo "Usage: $0 {start}"
exit 1
;;
esac

View File

@ -0,0 +1,51 @@
#!/bin/sh
### BEGIN INIT INFO
# Provides:
# Short-Description: Configure alternate networking
# Description: Configure networking that is not onboard WLAN
### END INIT INFO
. /opt/wz_mini/etc/rc.common
. /opt/wz_mini/wz_mini.conf
alternate_iface() {
if [[ "$ENABLE_USB_ETH" == "true" ]] || [[ "$ENABLE_USB_DIRECT" == "true" ]] || [[ "$ENABLE_USB_RNDIS" == "true" ]]; then
wait_for_wlan_wpa $(basename "$0")
echo "#####$(basename "$0")#####"
echo "Renaming interfaces"
ifconfig $ALT_IFACE down
ifconfig wlan0 down
/opt/wz_mini/bin/busybox ip link set wlan0 name wlanold
/opt/wz_mini/bin/busybox ip addr flush dev wlanold
/opt/wz_mini/bin/busybox ip link set $ALT_IFACE name wlan0
if [ -f /opt/wz_mini/tmp/.T20 ]; then
mount -o bind /opt/wz_mini/bin/wpa_cli.sh /system/bin/wpa_cli
else
mount -o bind /opt/wz_mini/bin/wpa_cli.sh /bin/wpa_cli
fi
else
echo "No alternate iface enabled"
fi
}
case "$1" in
start)
if ! [[ "$BONDING_ENABLED" == "true" ]]; then
alternate_iface &
fi
;;
*)
echo "Usage: $0 {start}"
exit 1
;;
esac

View File

@ -0,0 +1,98 @@
#!/bin/sh
### BEGIN INIT INFO
# Provides:
# Short-Description: Network bonding support
# Description: Enable bonding support as configured by user
### END INIT INFO
. /opt/wz_mini/etc/rc.common
. /opt/wz_mini/wz_mini.conf
bonding_setup() {
echo "#####$(basename "$0")#####"
echo "waiting until wlan0 is up with the modified HWaddr"
wait_for_wlan_wpa $(basename "$0")
##Fool iCamera by renaming the hardline interface to wlan0
## $1 Bonding Interface, $2 Primary Interface, $3 Secondary Interface
echo "renaming interfaces"
#Prevent iCamera from cycling the wlan0 interface
mount --bind /opt/wz_mini/usr/bin/restart_wlan0.sh /system/bin/restart_wlan0.sh
# Bring all interfaces down
ifconfig bond0 down
ifconfig $BONDING_PRIMARY_INTERFACE down
ifconfig $BONDING_SECONDARY_INTERFACE down
# Have to bring bonding interface up to be able to bond our slaves.
/opt/wz_mini/bin/busybox ip link set bond0 up
# Rename the real wlan0 interface if needed/used
if [[ "$BONDING_PRIMARY_INTERFACE" == "wlan0" ]]; then
/opt/wz_mini/bin/busybox ip link set $BONDING_PRIMARY_INTERFACE name wlanold
/opt/wz_mini/bin/busybox ip addr flush dev wlanold
BONDING_PRIMARY_INTERFACE="wlanold"
# Because we just changed the name of the primary interface, we need to
# tell the bonding driver about the name change as well.
echo "$BONDING_PRIMARY_INTERFACE" > /sys/devices/virtual/net/bond0/bonding/primary
fi
if [[ "$BONDING_SECONDARY_INTERFACE" == "wlan0" ]]; then
/opt/wz_mini/bin/busybox ip link set $BONDING_SECONDARY_INTERFACE name wlanold
/opt/wz_mini/bin/busybox ip addr flush dev wlanold
BONDING_SECONDARY_INTERFACE="wlanold"
fi
# Enslave the Ethernet and Original Wifi interfaces
# under the bonding interface.
/opt/wz_mini/tmp/.bin/ifenslave bond0 $BONDING_PRIMARY_INTERFACE $BONDING_SECONDARY_INTERFACE
# Have to bring bonding interface down to be rename the interface
/opt/wz_mini/bin/busybox ip link set bond0 down
# Name the bonding interface to be the "new" wlan0 interface
/opt/wz_mini/bin/busybox ip link set bond0 name wlan0
# Bring the newly renamed wlan0 (actually the bond interface) back up in the next step
#Run the DHCP client, and bind mount our fake wpa_cli.sh to fool iCamera
ifconfig wlan0 up
pkill udhcpc
udhcpc -i wlan0 -x hostname:$CUSTOM_HOSTNAME -p /var/run/udhcpc.pid -b
# If running with Interface Bonding enabled, kill any existing
# wpa_supplicant that might be running and spawn our own instead
if [[ "$BONDING_ENABLED" == "true" ]] && ([[ "$ENABLE_USB_ETH" == "true" ]] || [[ "$ENABLE_USB_DIRECT" == "true" ]]); then
echo "Restarting wpa_supplicant due to bonding"
/opt/wz_mini/bin/busybox killall wpa_supplicant
wpa_supplicant -D nl80211 -i wlanold -c /tmp/wpa_supplicant.conf -B -s
fi
if [ -f /opt/wz_mini/tmp/.T20 ]; then
mount -o bind /opt/wz_mini/bin/wpa_cli.sh /system/bin/wpa_cli
else
mount -o bind /opt/wz_mini/bin/wpa_cli.sh /bin/wpa_cli
fi
echo "Run network monitor for USB Direct"
/opt/wz_mini/usr/bin/netmon.sh &
}
case "$1" in
start)
if [[ "$BONDING_ENABLED" == "true" ]] && ([[ "$ENABLE_USB_ETH" == "true" ]] || [[ "$ENABLE_USB_DIRECT" == "true" ]]); then
bonding_setup &
fi
;;
*)
echo "Usage: $0 {start}"
exit 1
;;
esac

View File

@ -0,0 +1,31 @@
#!/bin/sh
### BEGIN INIT INFO
# Provides:
# Short-Description: Disable coredump
# Description: Disable dumpload and disable kernel coredump support
### END INIT INFO
. /opt/wz_mini/etc/rc.common
core() {
wait_for_wlan_wpa $(basename "$0")
echo "#####$(basename "$0")#####"
echo "Killing dumpload"
/opt/wz_mini/bin/busybox pkill -f dumpload
echo "Setting kernel core pattern"
sysctl -w kernel.core_pattern='|/bin/false' > /dev/null
}
case "$1" in
start)
core &
;;
*)
echo "Usage: $0 {start}"
exit 1
;;
esac

View File

@ -0,0 +1,34 @@
#!/bin/sh
### BEGIN INIT INFO
# Provides:
# Short-Description: FW Upgrade Intercept
# Description: Intercept FW Upgrades from vendor
### END INIT INFO
. /opt/wz_mini/wz_mini.conf
case "$1" in
start)
echo "#####$(basename "$0")#####"
if [[ "$DISABLE_FW_UPGRADE" == "true" ]]; then
mkdir /tmp/Upgrade
mount -t tmpfs -o size=1,nr_inodes=1 none /tmp/Upgrade
#Setting this host causes iCamera to segfault, lets ignore it for now
#echo -e "127.0.0.1 localhost \n127.0.0.1 wyze-upgrade-service.wyzecam.com" > /opt/wz_mini/tmp/.storage/hosts
#mount --bind /opt/wz_mini/tmp/.storage/hosts /etc/hosts
/opt/wz_mini/bin/busybox inotifyd /opt/wz_mini/usr/bin/watch_up.sh /tmp:n > /dev/null 2>&1 &
echo "Firmware updates disabled"
else
echo "Firmwware updates enabled, monitor script running"
mkdir /tmp/Upgrade
/opt/wz_mini/bin/busybox inotifyd /opt/wz_mini/usr/bin/watch_up.sh /tmp:n > /dev/null 2>&1 &
fi
;;
*)
echo "Usage: $0 {start}"
exit 1
;;
esac

View File

@ -0,0 +1,38 @@
#!/bin/sh
### BEGIN INIT INFO
# Provides:
# Short-Description: MP4WRITE Support
# Description: Prevent system trashing with mp4write support provided by libcallback, temporary video files are written direct to media instead of /tmp
### END INIT INFO
. /opt/wz_mini/etc/rc.common
. /opt/wz_mini/wz_mini.conf
mp4write() {
wait_for_icamera
echo "#####$(basename "$0")#####"
if [[ "$ENABLE_MP4_WRITE" == "true" ]]; then
if [ -f /opt/wz_mini/tmp/.T20 ]; then
echo "mp4_write is not supported on T20"
else
/opt/wz_mini/bin/cmd mp4write on > /dev/null
echo "mp4_write enabled"
fi
else
echo "mp4_write disabled"
fi
}
case "$1" in
start)
mp4write &
;;
*)
echo "Usage: $0 {start}"
exit 1
;;
esac

View File

@ -0,0 +1,25 @@
#!/bin/sh
### BEGIN INIT INFO
# Provides:
# Short-Description: Enable NightDrop support
# Description: Prevent the system from dropping FPS during night mode
### END INIT INFO
. /opt/wz_mini/wz_mini.conf
case "$1" in
start)
echo "#####$(basename "$0")#####"
if [[ "$NIGHT_DROP_DISABLE" == "true" ]]; then
echo "Night Drop Disable, Enabled"
touch /opt/wz_mini/tmp/.nd
fi
;;
*)
echo "Usage: $0 {start}"
exit 1
;;
esac

View File

@ -0,0 +1,27 @@
#!/bin/sh
### BEGIN INIT INFO
# Provides:
# Short-Description: Disable Motor
# Description: Disable Motor on specified devices
### END INIT INFO
. /opt/wz_mini/wz_mini.conf
case "$1" in
start)
echo "#####$(basename "$0")#####"
if [[ "$DISABLE_MOTOR" == "true" ]]; then
echo "Motor Disabled"
touch /opt/wz_mini/tmp/.ms
else
echo "Motor enabled"
fi
;;
*)
echo "Usage: $0 {start}"
exit 1
;;
esac

View File

@ -0,0 +1,39 @@
#!/bin/sh
### BEGIN INIT INFO
# Provides:
# Short-Description: Set system FPS
# Description: Set system FPS if greater than factory defaults
### END INIT INFO
. /opt/wz_mini/wz_mini.conf
case "$1" in
start)
echo "#####$(basename "$0")#####"
echo "Seting system FPS if greater than default"
if [ $RTSP_HI_RES_FPS -gt 20 ]; then
if cat /configs/.user_config | grep fps; then
sed -i "s/fps.*/fps\=$RTSP_HI_RES_FPS/" /configs/.user_config
else
sed -i "/\[SETTING\].*/a fps=$RTSP_HI_RES_FPS" /configs/.user_config
fi
elif [ $RTSP_LOW_RES_FPS -gt 20 ]; then
if cat /configs/.user_config | grep fps; then
sed -i "s/fps.*/fps\=$RTSP_LOW_RES_FPS/" /configs/.user_config
else
sed -i "/\[SETTING\].*/a fps=$RTSP_LOW_RES_FPS" /configs/.user_config
fi
fi
;;
*)
echo "Usage: $0 {start}"
exit 1
;;
esac

View File

@ -0,0 +1,31 @@
#!/bin/sh
### BEGIN INIT INFO
# Provides:
# Short-Description: Start cron daemon
# Description: Enable cron service
### END INIT INFO
. /opt/wz_mini/etc/rc.common
. /opt/wz_mini/wz_mini.conf
autostart_crond() {
wait_for_wlan_ip $(basename "$0")
echo "#####$(basename "$0")#####"
/opt/wz_mini/tmp/.bin/crond -b -c /opt/wz_mini/etc/cron/
}
case "$1" in
start)
if [[ "$ENABLE_CRONTAB" == "true" ]]; then
autostart_crond &
fi
;;
*)
echo "Usage: $0 {start}"
exit 1
;;
esac

View File

@ -0,0 +1,43 @@
#!/bin/sh
### BEGIN INIT INFO
# Provides:
# Short-Description: Store syslogs
# Description: Enable storing of syslogs to media
### END INIT INFO
. /opt/wz_mini/etc/rc.common
. /opt/wz_mini/wz_mini.conf
syslog_save() {
wait_for_icamera
echo "#####$(basename "$0")#####"
if [[ "$ENABLE_SYSLOG_SAVE" == "true" ]]; then
echo "Store syslog logs"
SYSLOG_LOG=/opt/wz_mini/log/syslog
if [[ -e $SYSLOG_LOG.log || -L $SYSLOG_LOG.log ]] ; then
i=0
while [[ -e $SYSLOG_LOG.log.$i || -L $SYSLOG_LOG.log.$i ]] ; do
let i++
done
mv $SYSLOG_LOG.log $SYSLOG_LOG.log.$i
SYSLOG_LOG=$SYSLOG_LOG
fi
touch -- "$SYSLOG_LOG".log
logread -F > $SYSLOG_LOG.log &
fi
}
case "$1" in
start)
syslog_save &
;;
*)
echo "Usage: $0 {start}"
exit 1
;;
esac

View File

@ -0,0 +1,5 @@
#!/bin/sh
#This file executes last, after rc.local.d/

View File

@ -68,6 +68,8 @@ RTSP_LOW_RES_MAX_BITRATE=""
RTSP_LOW_RES_TARGET_BITRATE="" RTSP_LOW_RES_TARGET_BITRATE=""
RTSP_LOW_RES_ENC_PARAMETER="" RTSP_LOW_RES_ENC_PARAMETER=""
RTSP_AUTH_DISABLE="false"
#####RTMP STREAMING##### #####RTMP STREAMING#####
#### REQUIRES RTSP #### #### REQUIRES RTSP ####
### AND RTSP AUDIO ### ### AND RTSP AUDIO ###
@ -93,12 +95,14 @@ DISABLE_MOTOR="false"
ENABLE_FSCK_ON_BOOT="false" ENABLE_FSCK_ON_BOOT="false"
ENABLE_CAR_DRIVER="false" ENABLE_CAR_DRIVER="false"
ENABLE_LOCAL_DNS="false" ENABLE_LOCAL_DNS="false"
ENABLE_CRONTAB="false"
#####DEBUG##### #####DEBUG#####
#drops you to a shell via serial, doesn't load app_init.sh #drops you to a shell via serial, doesn't load app_init.sh
DEBUG_ENABLED="false" DEBUG_ENABLED="false"
DEBUG_INITRAMFS_ENABLED="false" DEBUG_INITRAMFS_ENABLED="false"
DEBUG_PASSWORD="false" DEBUG_PASSWORD="false"
ENABLE_SYSLOG_SAVE="false"
####WEB#### ####WEB####
WEB_SERVER_ENABLED="false" WEB_SERVER_ENABLED="false"

View File

@ -1 +1 @@
Wed Aug 3 07:53:41 PM PDT 2022 Sun Aug 7 06:32:44 PM PDT 2022

View File

@ -9,11 +9,11 @@ export WZMINI_CFG=/opt/wz_mini/wz_mini.conf
[ -f $WZMINI_CFG ] && source $WZMINI_CFG [ -f $WZMINI_CFG ] && source $WZMINI_CFG
DELAY_BETWEEN=2 DELAY_BETWEEN=2
RE_RUN_DELAY=45 RE_RUN_DELAY=60
PARM=1 PARM=1
hi_res_monitor() { hi_res_monitor() {
if [[ "$RTSP_HI_RES_ENABLED" == "true" ]]; then if [[ "$RTSP_HI_RES_ENABLED" == "true" ]]; then
if [[ "$RTSP_HI_RES_ENC_PARAMETER" != "" ]]; then if [[ "$RTSP_HI_RES_ENC_PARAMETER" != "" ]]; then
if [ -f /opt/wz_mini/tmp/.T20 ]; then if [ -f /opt/wz_mini/tmp/.T20 ]; then
@ -74,14 +74,14 @@ if [[ "$RTSP_HI_RES_ENABLED" == "true" ]]; then
fi fi
low_res_monitor low_res_monitor
else else
echo "Hi-Res RTSP not enabled" echo "Hi-Res RTSP not enabled"
low_res_monitor low_res_monitor
fi fi
} }
low_res_monitor () { low_res_monitor () {
if [[ "$RTSP_LOW_RES_ENABLED" == "true" ]]; then if [[ "$RTSP_LOW_RES_ENABLED" == "true" ]]; then
if [[ "$RTSP_LOW_RES_ENC_PARAMETER" != "" ]]; then if [[ "$RTSP_LOW_RES_ENC_PARAMETER" != "" ]]; then
if [ -f /opt/wz_mini/tmp/.T20 ]; then if [ -f /opt/wz_mini/tmp/.T20 ]; then
@ -141,14 +141,14 @@ if [[ "$RTSP_LOW_RES_ENABLED" == "true" ]]; then
echo "No Low-Res imp variables enabled, exit" echo "No Low-Res imp variables enabled, exit"
break break
fi fi
else else
echo "Low-Res RTSP not enabled" echo "Low-Res RTSP not enabled"
if [[ "$RTSP_HI_RES_ENABLED" == "true" ]] && [ $PARM -gt 1 ]; then if [[ "$RTSP_HI_RES_ENABLED" == "true" ]] && [ $PARM -gt 1 ]; then
hi_res_monitor hi_res_monitor
else else
break break
fi fi
fi fi
} }
while true; do while true; do

View File

@ -0,0 +1,14 @@
#!/bin/sh
. /opt/wz_mini/wz_mini.conf
. /opt/wz_mini/etc/rc.common
if [[ "$ENABLE_USB_DIRECT" == "true" ]]; then
wait_for_wlan_ip $(basename "$0")
sleep 5
gateway_supervisor $(basename "$0") &
fi
echo "kill udhcpc extra"
kill $(pgrep -f 'udhcpc -i wlan0 -H WyzeCam')

View File

@ -0,0 +1,3 @@
#!/bin/sh
echo "up"

View File

@ -68,6 +68,8 @@ RTSP_LOW_RES_MAX_BITRATE=""
RTSP_LOW_RES_TARGET_BITRATE="" RTSP_LOW_RES_TARGET_BITRATE=""
RTSP_LOW_RES_ENC_PARAMETER="" RTSP_LOW_RES_ENC_PARAMETER=""
RTSP_AUTH_DISABLE="false"
#####RTMP STREAMING##### #####RTMP STREAMING#####
#### REQUIRES RTSP #### #### REQUIRES RTSP ####
### AND RTSP AUDIO ### ### AND RTSP AUDIO ###
@ -93,12 +95,14 @@ DISABLE_MOTOR="false"
ENABLE_FSCK_ON_BOOT="false" ENABLE_FSCK_ON_BOOT="false"
ENABLE_CAR_DRIVER="false" ENABLE_CAR_DRIVER="false"
ENABLE_LOCAL_DNS="false" ENABLE_LOCAL_DNS="false"
ENABLE_CRONTAB="false"
#####DEBUG##### #####DEBUG#####
#drops you to a shell via serial, doesn't load app_init.sh #drops you to a shell via serial, doesn't load app_init.sh
DEBUG_ENABLED="false" DEBUG_ENABLED="false"
DEBUG_INITRAMFS_ENABLED="false" DEBUG_INITRAMFS_ENABLED="false"
DEBUG_PASSWORD="false" DEBUG_PASSWORD="false"
ENABLE_SYSLOG_SAVE="false"
####WEB#### ####WEB####
WEB_SERVER_ENABLED="false" WEB_SERVER_ENABLED="false"

View File

@ -21,21 +21,63 @@ e344ffc55222c029c5d324037a5aa1f3 SD_ROOT/wz_mini/www/car/car.js
540acfdf2638c341e1d168f1af5203de SD_ROOT/wz_mini/www/car/car.css 540acfdf2638c341e1d168f1af5203de SD_ROOT/wz_mini/www/car/car.css
63b23f78d6703f0c9a2e970604104996 SD_ROOT/wz_mini/www/car/car.html 63b23f78d6703f0c9a2e970604104996 SD_ROOT/wz_mini/www/car/car.html
bd11d9a8352eca6a16554c87be50b2f5 SD_ROOT/wz_mini/www/index.html bd11d9a8352eca6a16554c87be50b2f5 SD_ROOT/wz_mini/www/index.html
ad5cdda7609e706adb152c0c05e4133e SD_ROOT/wz_mini/etc/network.d/S16rtmp
a09fe94aa6f18319db58947a1f252c3f SD_ROOT/wz_mini/etc/network.d/S09dnsmasq
b77697b15e4d6e32e6e2c8c07cbceee2 SD_ROOT/wz_mini/etc/network.d/S04wireguard
8951687f507171ad88e79ad29aba4388 SD_ROOT/wz_mini/etc/network.d/S12remoteaccessory
5a3469d5e53cac8d59a0fb2feffaa9e3 SD_ROOT/wz_mini/etc/network.d/S15v4l2rtspserver
d3ac671f88b6d639926b9f5f9a40da6e SD_ROOT/wz_mini/etc/network.d/S01wlanhw
6621e94ec289678afff70a2b51b42f77 SD_ROOT/wz_mini/etc/network.d/S10httpd
9969970dc82daa31b41730ee460514b0 SD_ROOT/wz_mini/etc/network.d/S03ipv6
edebe65d895650235f05291618814ebe SD_ROOT/wz_mini/etc/network.d/S08hostname
9f59e3c2c3a4c9b6600eb5385e29720c SD_ROOT/wz_mini/etc/network.d/S14storemac
32373fa3531a11c1aad41d12830b9c04 SD_ROOT/wz_mini/etc/dnsmasq.conf 32373fa3531a11c1aad41d12830b9c04 SD_ROOT/wz_mini/etc/dnsmasq.conf
34c6a4c3a941ff2becd9f487826d7692 SD_ROOT/wz_mini/etc/uvc.config 34c6a4c3a941ff2becd9f487826d7692 SD_ROOT/wz_mini/etc/uvc.config
ad7d1a2f9db3079617731b5854ce3b6a SD_ROOT/wz_mini/etc/init.d/wz_cam.sh 071acd61334923a9a3e5b799e012697e SD_ROOT/wz_mini/etc/init.d/S09firstboot
f97ffcb1482d564bf2557684a4c68846 SD_ROOT/wz_mini/etc/init.d/wz_init.sh d59a0e8db7cec700c7ce4e7b2882e25e SD_ROOT/wz_mini/etc/init.d/S11configbackup
4a423cfe7bd91090480da83b85a248b9 SD_ROOT/wz_mini/etc/init.d/wz_user.sh 1b4037ffff5b86b31939ef20f2ec2a2c SD_ROOT/wz_mini/etc/init.d/S10kmod
4eaf541a47e60035992435b115463541 SD_ROOT/wz_mini/etc/init.d/wz_post.sh 0e868d15fb8b09915975bab48f5a78f2 SD_ROOT/wz_mini/etc/init.d/S06car
5e27d90e6888f9665da2fb442ebd500c SD_ROOT/wz_mini/etc/init.d/S08passwd
8d9b5da920bf9c739517de3843631334 SD_ROOT/wz_mini/etc/init.d/S12ssh
b947e5bcb9cccaaf7d970f03732fab67 SD_ROOT/wz_mini/etc/init.d/S05mount
0113d8e9beb7d393c61959889193ba0e SD_ROOT/wz_mini/etc/init.d/S01bind
74f398e735e66f91bb5ff1ea42c3760d SD_ROOT/wz_mini/etc/init.d/S03busybox
a27d4a0dd6582ae51db92c35cf396ac3 SD_ROOT/wz_mini/etc/init.d/wz_init.sh
93ac3cc23a532f73921244aa61b62362 SD_ROOT/wz_mini/etc/init.d/S16factorycheck
c457995a14d408c18bf03c6b0d613b58 SD_ROOT/wz_mini/etc/init.d/S04model
df3911f5443239982e184af022a15815 SD_ROOT/wz_mini/etc/init.d/S14terminfo
9427dddfbba0d1f3931ee8fcb1f22347 SD_ROOT/wz_mini/etc/init.d/S07inject
ce899168f0a576809238b338dec6a666 SD_ROOT/wz_mini/etc/init.d/S02tmpfs
e3034eac02d8eda9902ca9cf89f0a586 SD_ROOT/wz_mini/etc/inittab e3034eac02d8eda9902ca9cf89f0a586 SD_ROOT/wz_mini/etc/inittab
840aa9c26726201f7cffbf001bee193a SD_ROOT/wz_mini/etc/uvc_jxf22.config 840aa9c26726201f7cffbf001bee193a SD_ROOT/wz_mini/etc/uvc_jxf22.config
d41d8cd98f00b204e9800998ecf8427e SD_ROOT/wz_mini/etc/rc.local.d/.gitignore d41d8cd98f00b204e9800998ecf8427e SD_ROOT/wz_mini/etc/rc.local.d/.gitignore
ac436b39b69f26fb65e993c2dfefb421 SD_ROOT/wz_mini/etc/wz_mini.conf.dist 99a800721bfe8a1b0e98f039175c12fd SD_ROOT/wz_mini/etc/wz_mini.conf.dist
4291fb00ec609b5b007ff9b3048e9248 SD_ROOT/wz_mini/etc/hosts 4291fb00ec609b5b007ff9b3048e9248 SD_ROOT/wz_mini/etc/hosts
b23d0f3527ce4a13419981af52a449a2 SD_ROOT/wz_mini/etc/rc.common
8b5e58acfcbb20034dc4873a08b45fd9 SD_ROOT/wz_mini/etc/profile 8b5e58acfcbb20034dc4873a08b45fd9 SD_ROOT/wz_mini/etc/profile
574a0198606cf3a2255843cd1ed7860a SD_ROOT/wz_mini/etc/cron/root
2c2df1b9cb603f9c31c46162d6ac307f SD_ROOT/wz_mini/etc/alsa/alsa.conf 2c2df1b9cb603f9c31c46162d6ac307f SD_ROOT/wz_mini/etc/alsa/alsa.conf
482483f68e5f41e0c3792b2e77fc1028 SD_ROOT/wz_mini/etc/rc.d/S18fps
80650d58c240c642295448a72a49ad45 SD_ROOT/wz_mini/etc/rc.d/K01network
ca8d8d8a60b3dc255133151ba33e0eb3 SD_ROOT/wz_mini/etc/rc.d/S17motor
03ca145794cedfe4748692dd6341839e SD_ROOT/wz_mini/etc/rc.d/S10firmware
5e81ec81999790b247ef2af25cc34cb6 SD_ROOT/wz_mini/etc/rc.d/K03rcd
ebfa49291afc96c4dd306101b7dec31c SD_ROOT/wz_mini/etc/rc.d/K02webcam
60d4ae31b12857888ae1643c89ef3a53 SD_ROOT/wz_mini/etc/rc.d/S07bonding
de825dae173ec43983d6ffa1a293060e SD_ROOT/wz_mini/etc/rc.d/S06networkalt
10908c95aa008ffa6ae53c6583d16ad2 SD_ROOT/wz_mini/etc/rc.d/S14nightdrop
264bd2ac40adf4c24c081b53f9763996 SD_ROOT/wz_mini/etc/rc.d/S03ethernet
282e4e0ce3be2740403466bea0c380d9 SD_ROOT/wz_mini/etc/rc.d/S20cron
c64a9651df819401b04708736c29cf30 SD_ROOT/wz_mini/etc/rc.d/S13mp4write
28ddd36f07b39500630eccd16d9938aa SD_ROOT/wz_mini/etc/rc.d/S05rndis
8cd393bb2cda585061961dba143ae2bd SD_ROOT/wz_mini/etc/rc.d/S01swap
17ab0c2db34671e4dcc05cc4e6b440ee SD_ROOT/wz_mini/etc/rc.d/K15logging
55dfb3a95dec09663df5ae9da8e7a602 SD_ROOT/wz_mini/etc/rc.d/S21syslog
e76b57b067bc349fd3e977447b0316f4 SD_ROOT/wz_mini/etc/rc.d/S04usbdirect
70e289c992f46d69954f72b7550b9876 SD_ROOT/wz_mini/etc/rc.d/S09coredump
9e5591da95042bcca910403bde25dc60 SD_ROOT/wz_mini/etc/fstab 9e5591da95042bcca910403bde25dc60 SD_ROOT/wz_mini/etc/fstab
3962900301ef8743c68e42ecef4d2811 SD_ROOT/wz_mini/etc/passwd 3962900301ef8743c68e42ecef4d2811 SD_ROOT/wz_mini/etc/passwd
775b92a2052189e3e407cbceb548cae7 SD_ROOT/wz_mini/etc/rc.local
c838ac76efbe3d3fc3c4805789a6519f SD_ROOT/wz_mini/etc/uvc_jxf23.config c838ac76efbe3d3fc3c4805789a6519f SD_ROOT/wz_mini/etc/uvc_jxf23.config
9dafc0f6aa1ea4f8e7ccf0caafd5e28d SD_ROOT/wz_mini/etc/resolv.dnsmasq 9dafc0f6aa1ea4f8e7ccf0caafd5e28d SD_ROOT/wz_mini/etc/resolv.dnsmasq
d41d8cd98f00b204e9800998ecf8427e SD_ROOT/wz_mini/etc/configs/.gitignore d41d8cd98f00b204e9800998ecf8427e SD_ROOT/wz_mini/etc/configs/.gitignore
@ -86,7 +128,7 @@ e6a6a9dd8ce138686083a3d4303cea40 SD_ROOT/wz_mini/bin/iperf3
79d69cd251a8cdadd9957cdaec2034fc SD_ROOT/wz_mini/bin/rtmp-stream.sh 79d69cd251a8cdadd9957cdaec2034fc SD_ROOT/wz_mini/bin/rtmp-stream.sh
5d1359af0c7c5d326b8682a62f910620 SD_ROOT/wz_mini/bin/strace 5d1359af0c7c5d326b8682a62f910620 SD_ROOT/wz_mini/bin/strace
516118bfcc0f0ddc93fb9339b3c6a315 SD_ROOT/wz_mini/bin/xtables-multi 516118bfcc0f0ddc93fb9339b3c6a315 SD_ROOT/wz_mini/bin/xtables-multi
9be9aab45620d83fecc8b963954cf4f1 SD_ROOT/wz_mini/bin/gather_wz_logs.sh ba7475184c364fee8bba1f45b7c42070 SD_ROOT/wz_mini/bin/gather_wz_logs.sh
097cd91a56f2b0caea1dd87ae0e51a54 SD_ROOT/wz_mini/bin/screen 097cd91a56f2b0caea1dd87ae0e51a54 SD_ROOT/wz_mini/bin/screen
fbbc2a8f362d05fc31557b1a534b42c6 SD_ROOT/wz_mini/bin/wget fbbc2a8f362d05fc31557b1a534b42c6 SD_ROOT/wz_mini/bin/wget
35420095a770c9bb6177788842f55bba SD_ROOT/wz_mini/bin/dropbearconvert 35420095a770c9bb6177788842f55bba SD_ROOT/wz_mini/bin/dropbearconvert
@ -105,14 +147,16 @@ eaf86f91cb1b15b2191a8845ae88e3c8 SD_ROOT/wz_mini/usr/share/audio/init_v2.wav
02fed0e4b2382d839f630ce0477aba26 SD_ROOT/wz_mini/usr/share/audio/init.wav 02fed0e4b2382d839f630ce0477aba26 SD_ROOT/wz_mini/usr/share/audio/init.wav
5754f767c1334df202983aed2a20a050 SD_ROOT/wz_mini/usr/share/audio/binbin_v3.wav 5754f767c1334df202983aed2a20a050 SD_ROOT/wz_mini/usr/share/audio/binbin_v3.wav
6e01838f67f7e6e51a6891e1c411318a SD_ROOT/wz_mini/usr/share/audio/honk.wav 6e01838f67f7e6e51a6891e1c411318a SD_ROOT/wz_mini/usr/share/audio/honk.wav
71b26aa98e14c4a1f5798b3e3a2d9bab SD_ROOT/wz_mini/usr/bin/restart_wlan0.sh
ac9f3a5d097d25d5d972c3d2ad288df9 SD_ROOT/wz_mini/usr/bin/ucamera_v2 ac9f3a5d097d25d5d972c3d2ad288df9 SD_ROOT/wz_mini/usr/bin/ucamera_v2
7626ba23cc36b88491b010dd6eff72de SD_ROOT/wz_mini/usr/bin/iCamera 7626ba23cc36b88491b010dd6eff72de SD_ROOT/wz_mini/usr/bin/iCamera
1e64fdad40c82ecce420f71701ec3d6d SD_ROOT/wz_mini/usr/bin/watch_up.sh 1e64fdad40c82ecce420f71701ec3d6d SD_ROOT/wz_mini/usr/bin/watch_up.sh
b339aee882a5d1c943ad08e4282ec3fd SD_ROOT/wz_mini/usr/bin/iCamera-dbg b339aee882a5d1c943ad08e4282ec3fd SD_ROOT/wz_mini/usr/bin/iCamera-dbg
0de553a920d30d1e9d84c9ab4136df0d SD_ROOT/wz_mini/usr/bin/ucamera 20b061689308b2cee7edf3b9b906bca7 SD_ROOT/wz_mini/usr/bin/ucamera
3777d9e80c8b517c01a124e6360b6525 SD_ROOT/wz_mini/usr/bin/imp_helper.sh 071b974925501c4b83f2dd546d90febd SD_ROOT/wz_mini/usr/bin/netmon.sh
3e15a736b79854c35abb7fd4f7207064 SD_ROOT/wz_mini/usr/bin/imp_helper.sh
580b1b6e91e72b4a4fef7b21d8954403 SD_ROOT/wz_mini/usr/bin/getSensorType 580b1b6e91e72b4a4fef7b21d8954403 SD_ROOT/wz_mini/usr/bin/getSensorType
bd20117feddea81a3db3bb4471a088db SD_ROOT/wz_mini/usr/bin/app.ver 9f367ddd445aa9645d99e7467a5ce5e0 SD_ROOT/wz_mini/usr/bin/app.ver
4c780f0455481d106d47d89f0ae04ed5 SD_ROOT/wz_mini/lib/uClibc.tar 4c780f0455481d106d47d89f0ae04ed5 SD_ROOT/wz_mini/lib/uClibc.tar
9afeb088e4cbabbe0b04033b560204d0 SD_ROOT/wz_mini/lib/libimp.so 9afeb088e4cbabbe0b04033b560204d0 SD_ROOT/wz_mini/lib/libimp.so
4100755cb6cc6e3b76da20c7e3690e16 SD_ROOT/wz_mini/lib/libalog.so 4100755cb6cc6e3b76da20c7e3690e16 SD_ROOT/wz_mini/lib/libalog.so
@ -261,7 +305,7 @@ c6a2e765996b4a8bfe351757785fb989 SD_ROOT/wz_mini/lib/modules/3.10.14__isvp_swan
14865a6e2e2df87a8362c6f20377a934 SD_ROOT/wz_mini/lib/libtinyalsa.so.2 14865a6e2e2df87a8362c6f20377a934 SD_ROOT/wz_mini/lib/libtinyalsa.so.2
bd383994491e4bdca81788c168feb2eb SD_ROOT/wz_mini/lib/libasound.so.2 bd383994491e4bdca81788c168feb2eb SD_ROOT/wz_mini/lib/libasound.so.2
f6f0d5a9ebd916de6bdb9695067809ae SD_ROOT/wz_mini/lib/libaudioProcess.so f6f0d5a9ebd916de6bdb9695067809ae SD_ROOT/wz_mini/lib/libaudioProcess.so
ac436b39b69f26fb65e993c2dfefb421 SD_ROOT/wz_mini/wz_mini.conf 99a800721bfe8a1b0e98f039175c12fd SD_ROOT/wz_mini/wz_mini.conf
d41d8cd98f00b204e9800998ecf8427e SD_ROOT/wz_mini/tmp/.gitignore d41d8cd98f00b204e9800998ecf8427e SD_ROOT/wz_mini/tmp/.gitignore
283fca97d62c1c199eb2b04877998879 v2_install/compile_image.sh 283fca97d62c1c199eb2b04877998879 v2_install/compile_image.sh
53db8da5b90bc9b219dbb1d58e934bda v2_install/fw_tool.sh 53db8da5b90bc9b219dbb1d58e934bda v2_install/fw_tool.sh

View File

@ -1,47 +0,0 @@
#!/bin/sh
# devtmpfs does not get automounted for initramfs
set -x
mount -t devtmpfs devtmpfs /dev
mount -t proc proc /proc
mount -t sysfs sysfs /sys
sleep 1
mkdir -p /sdcard
mount -t vfat /dev/mmcblk0p1 /sdcard -o rw,umask=0000,dmask=0000
mkdir /v3
mount -t squashfs /dev/mtdblock2 /v3
if [ ! -f /sdcard/wz_mini/etc/init.d/v3_init.sh ]; then
echo "v3_init not found, booting stock"
mount --move /dev /v3/dev
mount --move /sys /v3/sys
mount --move /proc /v3/proc
umount /sdcard
exec busybox switch_root /v3 /linuxrc
else
mkdir -p /v3/dev
mkdir -p /v3/sys
mount --move /dev /v3/dev
mount --move /sys /v3/sys
mount --move /proc /v3/proc
#mkdir -p /v3/media/mmc
mount --move /sdcard /v3/opt
#exec busybox switch_root /v3 /linuxrc
exec busybox switch_root /v3 /opt/wz_mini/etc/init.d/v3_init.sh
fi

View File

@ -1,85 +0,0 @@
#!/bin/sh
set -x
# devtmpfs does not get automounted for initramfs
mount -t devtmpfs devtmpfs /dev
mount -t proc proc /proc
mount -t sysfs sysfs /sys
#Required delay on T20/T31
sleep 1
echo "Check for T20 platform"
if [ -b /dev/mtdblock10 ]; then
echo "Found T20"
#T20: Need to export the sd card enable gpio manually
echo 43 > /sys/class/gpio/export
echo in > /sys/class/gpio/gpio43/direction
#T20: Insert required delay for sd card init
sleep 3
else
echo "Not T20"
fi
mkdir -p /sdcard
mount -t vfat /dev/mmcblk0p1 /sdcard -o rw,umask=0000,dmask=0000
initram_init() {
mkdir /v3
mount -t squashfs /dev/mtdblock2 /v3
if [ ! -f /sdcard/wz_mini/etc/init.d/v3_init.sh ]; then
echo "wz_mini not found, booting stock"
mount --move /dev /v3/dev
mount --move /sys /v3/sys
mount --move /proc /v3/proc
umount /sdcard
exec busybox switch_root /v3 /linuxrc
else
echo "Loading wz_mini..."
mkdir -p /v3/dev
mkdir -p /v3/sys
mount --move /dev /v3/dev
mount --move /sys /v3/sys
mount --move /proc /v3/proc
#mkdir -p /v3/media/mmc
mount --move /sdcard /v3/opt
#exec busybox switch_root /v3 /linuxrc
exec busybox switch_root /v3 /opt/wz_mini/etc/init.d/v3_init.sh
fi
}
if [ -f /sdcard/wz_mini/wz_mini.conf ]; then
source /sdcard/wz_mini/wz_mini.conf
if [[ "$DEBUG_INITRAMFS_ENABLED" == "true" ]]; then
/bin/sh
#exit 0
else
echo "initramfs debug disabled"
initram_init
fi
else
initram_init
fi