Mirrored_Repos/wz_mini_hacks
1
0
Fork 0
mirror of https://github.com/gtxaspec/wz_mini_hacks.git synced 2024-11-14 00:58:20 +00:00
Code Issues Packages Projects Releases Wiki Activity

Add some documentation about what Bonding does, and the variables it supports

Browse Source
This commit is contained in:
Scott Kilau 2022-06-21 11:34:43 -05:00
parent 8812ec8541
commit 59e31465a0
1 changed files with 39 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

39
README.md
View File

@ -161,6 +161,45 @@ the next time you boot your camera, make sure your USB Ethernet Adapter is conne
--- ---
Network Interface Bonding Support
```
BONDING_ENABLED="false"
BONDING_PRIMARY_INTERFACE="eth0"
BONDING_SECONDARY_INTERFACE="wlan0"
BONDING_LINK_MONITORING_FREQ_MS="100"
BONDING_DOWN_DELAY_MS="5000"
BONDING_UP_DELAY_MS="5000"
```
Bonding description is best described here:
https://wiki.debian.org/Bonding#Configuration_-_Example_2_.28.22Laptop-Mode.22.29:
("Laptop-Mode")
Tie cable and wireless network interfaces (RJ45/WLAN) together to define a single, virtual (i.e. bonding) network interface (e.g. bond0).
As long as the network cable is connected, its interface (e.g. eth0) is used for the network traffic. If you pull the RJ45-plug, ifenslave switches over to the wireless interface (e.g. wlan0) transparently, without any loss of network packages.
After reconnecting the network cable, ifenslave switches back to eth0 ("failover mode").
From the outside (=network) view it doesn't matter which interface is active. The bonding device presents its own software-defined (i.e. virtual) MAC address, different from the hardware defined MACs of eth0 or wlan0.
The dhcp server will use this MAC to assign an ip address to the bond0 device. So the computer has one unique ip address under which it can be identified. Without bonding each interface would have its own ip address.
BONDING_PRIMARY_INTERFACE
Specifies the interface that should be the primary. Typically "eth0".
BONDING_SECONDARY_INTERFACE
Specifies the interface that should be the secondary. Typically "wlan0".
BONDING_LINK_MONITORING_FREQ_MS
Specifies the MII link monitoring frequency in milliseconds. This determines how often the link state of each slave is inspected for link failures.
BONDING_DOWN_DELAY_MS
Specifies the time, in milliseconds, to wait before disabling a slave after a link failure has been detected. This option is only valid for the miimon link monitor. The downdelay value should be a multiple of the miimon value; if not, it will be rounded down to the nearest multiple.
BONDING_UP_DELAY_MS
Specifies the time, in milliseconds, to wait before enabling a slave after a link recovery has been detected. This option is only valid for the miimon link monitor. The updelay value should be a multiple of the miimon value; if not, it will be rounded down to the nearest multiple.
---
USB Direct Support: USB Direct Support:
``` ```