revise paths, add ethernet deps

README.md

@@ -1,26 +1,27 @@
 # wz_mini_hacks
-### v3 devices ONLY
+### v3/PANv2 devices ONLY
 
-Run the latest stable ( 4.36.8.32 ) firmware on your v3 cam and have root access to the device.  This is in early stages of testing, use CAUTION if you are unsure of what you are doing.  No support whatsoever is offered with this release.  
+Run whatever firmware you want on your cameras and have root access to the device.  This is in early stages of testing, use CAUTION if you are unsure of what you are doing.  No support whatsoever is offered with this release.  
 **Do not contact the manufacturer for information or support, they will not be able to assist you!**
 
 ### Related Projects:
-* wz_mini_debian: run full debian in a chroot, on the v3!
+* wz_mini_debian: run full debian in a chroot, on the camera!
-* wz_mini_utils: various statically compiled binaries for use with the v3 (mipsel)
+* wz_mini_utils: various statically compiled binaries for use with the camera (mipsel)
 
 
 ## Features
 
 * No modification is done to the system. **_Zero!_**
 * Custom kernel loads all required files from micro-sd card
+* Wireguard, and ipv6 support enabled
 * Easy uninstall, just remove files from micro-sd card, or don't use a micro-sd card at all!
 * Add your own changes to run at boot into the script on the micro sd card located at /media/mmc/run_mmc.sh, mount nfs, run ping, whatever you want
 * Ability to update to the latest stable or beta firmware, this mod should survive updates as long as the bootloader remains the same
 * Ability to block remote AND app initiated firmware updates
-* Works on ANY ( tested up to 4.36.8.32, even RTSP ) v3 firmware release
+* Works on ANY firmware release (so far!)
 * DNS Spoofing or Telnet mod are *not* required prior to installation
 * *NEW* Automated installer, put files on the micro sd card and wait for the unit to reboot
-* PAN v2 Support coming soon
+* PAN v2 now supported
 * Inspired by HclX and WyzeHacks, borrowed busybox and dropbearmulti from his v2 repo.  Bless you for all your work!  You are the master!
 
 ## Prerequisites
@@ -35,9 +36,9 @@ Run the latest stable ( 4.36.8.32 ) firmware on your v3 cam and have root access
 2. copy all the files inside of SD_ROOT to your micro sd card
 
 ## Installation
-1. Turn off the v3 camera
+1. Turn off the camera
-2. Insert the micro sd memory card into the v3 camera
+2. Insert the micro sd memory card into the camera
-3. Turn on the v3 camera
+3. Turn on the camera
 4. The camera will boot, then you may connect via the IP address of your device using SSH, port 22.  username is root password is WYom2020.  It may take a few minutes for the device to finish booting and connect to wifi, then launch the SSH server.  Be patient.
 
 ## Removal

SD_ROOT/wz_mini/bin/iwconfig.sh

@@ -0,0 +1,13 @@
+#!/bin/sh
+
+
+echo 'wlan0     IEEE 802.11bgn  ESSID:"ethernet"  Nickname:"<WIFI@REALTEK>"'
+echo '          Mode:Managed  Frequency:2.472 GHz  Access Point: 70:8B:CD:86::E8'
+echo '          Bit Rate:72.2 Mb/s   Sensitivity:0/0  '
+echo '          Retry:off   RTS thr:off   Fragment thr:off'
+echo '          Encryption key:****-****-****-****-****-****-****-****   Security mode:open'
+echo '          Power Management:off'
+echo '          Link Quality=92/100  Signal level=100/100  Noise level=0/100'
+echo '          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0'
+echo '          Tx excessive retries:0  Invalid misc:0   Missed beacon:0'
+

SD_ROOT/wz_mini/bin/wpa_cli.sh

@@ -0,0 +1,4 @@
+#!/bin/sh
+
+echo 'wpa_state=COMPLETED'
+echo ip_addresss=`ifconfig wlan0 | awk '/inet / {print $2}' | awk -F: '{print $2}'`

SD_ROOT/wz_mini/etc/profile

@@ -0,0 +1,18 @@
+# Set PS1
+if [ "$PS1" ]; then
+	if [ "`id -u`" -eq 0 ]; then
+		export PS1='[\u@\h:\W]# '
+	else
+		export PS1='[\u@\h:\W]$ '
+	fi
+fi
+
+# Set terminal env
+export PATH=/bin:/sbin:/usr/bin:/usr/sbin:/media/mmc/wz_mini/bin
+export PATH=/system/bin:$PATH
+export LD_LIBRARY_PATH=/system/lib
+export LD_LIBRARY_PATH=/thirdlib:$LD_LIBRARY_PATH
+#export TZ=UTC-8
+
+# Set directoty and file default create permission
+umask 022

SD_ROOT/wz_mini/run_mmc.sh

@@ -1,52 +1,56 @@
 #!/bin/sh
 
+DISABLE_FW_UPGRADE="false"
+HOSTNAME="WCV3_spare_test"
+
+echo  "run_mmc.sh start" > /dev/kmsg
+
 echo "check if ethernet adapter is present"
  if [[ ! -d /sys/class/net/eth* ]]; then
         echo "usb ethernet not present"
 	if [[ ! -d /sys/class/net/usb0* ]]; then
         	echo "usb host not present"
 	else
+	##ONLY WORKS WITH g_ethernet enabled kernel
         ifconfig usb0 down
         ifconfig wlan0 down
-	/media/mmc/busybox ip link set wlan0 address 02:01:02:03:04:08                                                         
+	/media/mmc/wz_mini/bin/busybox ip link set wlan0 address 02:01:02:03:04:08
-        /media/mmc/busybox ip link set wlan0 name wlanold
+        /media/mmc/wz_mini/bin/busybox ip link set wlan0 name wlanold
-        /media/mmc/busybox ip link set usb0 name wlan0
+        /media/mmc/wz_mini/bin/busybox ip link set usb0 name wlan0
 
         ifconfig wlan0 up
         udhcpc -i wlan0
-        /media/mmc/dropbearmulti dropbear -R -m &       
+        /media/mmc/wz_mini/bin/dropbearmulti dropbear -R -m &
         sleep 5
-        mount -o bind /media/mmc/wpa_cli.sh /bin/wpa_cli	
+        mount -o bind /media/mmc/wz_mini/bin/wpa_cli.sh /bin/wpa_cli
 	fi
     else
         ifconfig eth0 down
         ifconfig wlan0 down
 
-        /media/mmc/busybox ip link set wlan0 name wlanold 
+        /media/mmc/wz_mini/bin/busybox  ip link set wlan0 name wlanold
-        /media/mmc/busybox ip link set eth0 name wlan0
+        /media/mmc/wz_mini/bin/busybox  ip link set eth0 name wlan0
 
         ifconfig wlan0 up
         udhcpc -i wlan0
-        /media/mmc/dropbearmulti dropbear -R -m &
+        /media/mmc/wz_mini/bin/dropbearmulti dropbear -R -m &
         sleep 5
-        mount -o bind /media/mmc/wpa_cli.sh /bin/wpa_cli
+        mount -o bind /media/mmc/wz_mini/bin/wpa_cli.sh /bin/wpa_cli
     fi
 
-echo set hostname
+if [[ "$DISABLE_FW_UPGRADE" == "true" ]]; then
-hostname WCV3_spare_test
+	mkdir /tmp/Upgrade
+	mount -t tmpfs -o size=1,nr_inodes=1 none /tmp/Upgrade
+	echo -e "127.0.0.1 localhost \n127.0.0.1 wyze-upgrade-service.wyzecam.com" > /tmp/hosts_wz
+	mount --bind /tmp/hosts_wz /etc/hosts
+fi
 
-echo Store dmesg logs
+echo set hostname
-dmesg > /media/mmc/wz_mini/logs/dmesg.log
+hostname $HOSTNAME
 
 echo Run dropbear ssh server
 /media/mmc/wz_mini/bin/dropbearmulti dropbear -R -m
 
-#echo Disable remote firmware upgrade, uncomment lines below to enable
-#mkdir /tmp/Upgrade
-#mount -t tmpfs -o size=1,nr_inodes=1 none /tmp/Upgrade
-#echo -e 127.0.0.1 localhost n127.0.0.1 wyze-upgrade-service.wyzecam.com > /tmp/hosts_wz
-#mount --bind /tmp/hosts_wz /etc/hosts
-
 sleep 3
 
 #Place commands here to run 30 seconds after boot