mirror of
https://github.com/python-kasa/python-kasa.git
synced 2024-12-23 03:33:35 +00:00
48 lines
2.4 KiB
ReStructuredText
48 lines
2.4 KiB
ReStructuredText
Command-line usage
|
|
==================
|
|
|
|
The package is shipped with a console tool named ``kasa``, refer to ``kasa --help`` for detailed usage.
|
|
The device to which the commands are sent is chosen by ``KASA_HOST`` environment variable or passing ``--host <address>`` as an option.
|
|
To see what is being sent to and received from the device, specify option ``--debug``.
|
|
|
|
To avoid discovering the devices when executing commands its type can be passed as an option (e.g., ``--type plug`` for plugs, ``--type bulb`` for bulbs, ..).
|
|
If no type is manually given, its type will be discovered automatically which causes a short delay.
|
|
|
|
If no command is given, the ``state`` command will be executed to query the device state.
|
|
|
|
.. note::
|
|
|
|
Some commands (such as reading energy meter values, changing bulb settings, or accessing individual sockets on smart strips) additional parameters are required,
|
|
which you can find by adding ``--help`` after the command, e.g. ``kasa --type emeter --help`` or ``kasa --type hsv --help``.
|
|
Refer to the device type specific documentation for more details.
|
|
|
|
Discovery
|
|
*********
|
|
|
|
The tool can automatically discover supported devices using a broadcast-based discovery protocol.
|
|
This works by sending an UDP datagram on port 9999 to the broadcast address (defaulting to ``255.255.255.255``).
|
|
|
|
On multihomed systems, you can use ``--target`` option to specify the broadcsat target.
|
|
For example, if your devices reside in network ``10.0.0.0/24`` you can use ``kasa --target 10.0.0.255 discover`` to discover them.
|
|
|
|
.. note::
|
|
|
|
When no command is specified when invoking ``kasa``, a discovery is performed and the ``state`` command is executed on each discovered device.
|
|
|
|
Provisioning
|
|
************
|
|
|
|
You can provision your device without any extra apps by using the ``kasa wifi`` command:
|
|
|
|
1. If the device is unprovisioned, connect to its open network
|
|
2. Use ``kasa discover`` (or check the routes) to locate the IP address of the device (likely 192.168.0.1, if unprovisioned)
|
|
3. Scan for available networks using ``kasa --host 192.168.0.1 wifi scan`` see which networks are visible to the device
|
|
4. Join/change the network using ``kasa --host 192.168.0.1 wifi join <network to join>``
|
|
|
|
As with all other commands, you can also pass ``--help`` to both ``join`` and ``scan`` commands to see the available options.
|
|
|
|
``kasa --help``
|
|
***************
|
|
|
|
.. program-output:: kasa --help
|