python-kasa
[](https://badge.fury.io/py/python-kasa)
[](https://github.com/python-kasa/python-kasa/actions/workflows/ci.yml)
[](https://codecov.io/gh/python-kasa/python-kasa)
[](https://python-kasa.readthedocs.io/en/latest/?badge=latest)
python-kasa is a Python library to control TPLink's smart home devices (plugs, wall switches, power strips, and bulbs).
This is a voluntary, community-driven effort and is not affiliated, sponsored, or endorsed by TPLink.
**Contributions in any form (adding missing features, reporting issues, fixing or triaging existing ones, improving the documentation, or device donations) are more than welcome!**
---
## Getting started
You can install the most recent release using pip:
```
pip install python-kasa
```
If you are using cpython, it is recommended to install with `[speedups]` to enable orjson (faster json support):
```
pip install python-kasa[speedups]
```
With `[speedups]`, the protocol overhead is roughly an order of magnitude lower (benchmarks available in devtools).
Alternatively, you can clone this repository and use poetry to install the development version:
```
git clone https://github.com/python-kasa/python-kasa.git
cd python-kasa/
poetry install
```
If you have not yet provisioned your device, [you can do so using the cli tool](https://python-kasa.readthedocs.io/en/latest/cli.html#provisioning).
## Discovering devices
Running `kasa discover` will send discovery packets to the default broadcast address (`255.255.255.255`) to discover supported devices.
If your system has multiple network interfaces, you can specify the broadcast address using the `--target` option.
The `discover` command will automatically execute the `state` command on all the discovered devices:
```
$ kasa discover
Discovering devices on 255.255.255.255 for 3 seconds
== Bulb McBulby - KL130(EU) ==
Host: 192.168.xx.xx
Port: 9999
Device state: True
== Generic information ==
Time: 2023-12-05 14:33:23 (tz: {'index': 6, 'err_code': 0}
Hardware: 1.0
Software: 1.8.8 Build 190613 Rel.123436
MAC (rssi): 1c:3b:f3:xx:xx:xx (-56)
Location: {'latitude': None, 'longitude': None}
== Device specific information ==
Brightness: 16
Is dimmable: True
Color temperature: 2500
Valid temperature range: ColorTempRange(min=2500, max=9000)
HSV: HSV(hue=0, saturation=0, value=16)
Presets:
index=0 brightness=50 hue=0 saturation=0 color_temp=2500 custom=None id=None mode=None
index=1 brightness=100 hue=299 saturation=95 color_temp=0 custom=None id=None mode=None
index=2 brightness=100 hue=120 saturation=75 color_temp=0 custom=None id=None mode=None
index=3 brightness=100 hue=240 saturation=75 color_temp=0 custom=None id=None mode=None
== Current State ==
== Modules ==
+
+
+
+
+
-
+
```
If your device requires authentication to control it,
you need to pass the credentials using `--username` and `--password` options.
## Basic functionalities
All devices support a variety of common commands, including:
* `state` which returns state information
* `on` and `off` for turning the device on or off
* `emeter` (where applicable) to return energy consumption information
* `sysinfo` to return raw system information
The syntax to control device is `kasa --host `.
Use `kasa --help` ([or consult the documentation](https://python-kasa.readthedocs.io/en/latest/cli.html#kasa-help)) to get a list of all available commands and options.
Some examples of available options include JSON output (`--json`), defining timeouts (`--timeout` and `--discovery-timeout`).
Each individual command may also have additional options, which are shown when called with the `--help` option.
For example, `--transition` on bulbs requests a smooth state change, while `--name` and `--index` are used on power strips to select the socket to act on:
```
$ kasa on --help
Usage: kasa on [OPTIONS]
Turn the device on.
Options:
--index INTEGER
--name TEXT
--transition INTEGER
--help Show this message and exit.
```
### Bulbs
Common commands for bulbs and light strips include:
* `brightness` to control the brightness
* `hsv` to control the colors
* `temperature` to control the color temperatures
When executed without parameters, these commands will report the current state.
Some devices support `--transition` option to perform a smooth state change.
For example, the following turns the light to 30% brightness over a period of five seconds:
```
$ kasa --host brightness --transition 5000 30
```
See `--help` for additional options and [the documentation](https://python-kasa.readthedocs.io/en/latest/smartbulb.html) for more details about supported features and limitations.
### Power strips
Each individual socket can be controlled separately by passing `--index` or `--name` to the command.
If neither option is defined, the commands act on the whole power strip.
For example:
```
$ kasa --host off # turns off all sockets
$ kasa --host off --name 'Socket1' # turns off socket named 'Socket1'
```
See `--help` for additional options and [the documentation](https://python-kasa.readthedocs.io/en/latest/smartstrip.html) for more details about supported features and limitations.
## Energy meter
Running `kasa emeter` command will return the current consumption.
Possible options include `--year` and `--month` for retrieving historical state,
and reseting the counters can be done with `--erase`.
```
$ kasa emeter
== Emeter ==
Current state: {'total': 133.105, 'power': 108.223577, 'current': 0.54463, 'voltage': 225.296283}
```
# Library usage
If you want to use this library in your own project, a good starting point is to check [the documentation on discovering devices](https://python-kasa.readthedocs.io/en/latest/discover.html).
You can find several code examples in the API documentation of each of the implementation base classes, check out the [documentation for the base class shared by all supported devices](https://python-kasa.readthedocs.io/en/latest/smartdevice.html).
[The library design and module structure is described in a separate page](https://python-kasa.readthedocs.io/en/latest/design.html).
The device type specific documentation can be found in their separate pages:
* [Plugs](https://python-kasa.readthedocs.io/en/latest/smartplug.html)
* [Bulbs](https://python-kasa.readthedocs.io/en/latest/smartbulb.html)
* [Dimmers](https://python-kasa.readthedocs.io/en/latest/smartdimmer.html)
* [Power strips](https://python-kasa.readthedocs.io/en/latest/smartstrip.html)
* [Light strips](https://python-kasa.readthedocs.io/en/latest/smartlightstrip.html)
## Contributing
Contributions are very welcome! To simplify the process, we are leveraging automated checks and tests for contributions.
### Setting up development environment
To get started, simply clone this repository and initialize the development environment.
We are using [poetry](https://python-poetry.org) for dependency management, so after cloning the repository simply execute
`poetry install` which will install all necessary packages and create a virtual environment for you.
### Code-style checks
We use several tools to automatically check all contributions. The simplest way to verify that everything is formatted properly
before creating a pull request, consider activating the pre-commit hooks by executing `pre-commit install`.
This will make sure that the checks are passing when you do a commit.
You can also execute the checks by running either `tox -e lint` to only do the linting checks, or `tox` to also execute the tests.
### Running tests
You can run tests on the library by executing `pytest` in the source directory.
This will run the tests against contributed example responses, but you can also execute the tests against a real device:
```
$ pytest --ip
```
Note that this will perform state changes on the device.
### Analyzing network captures
The simplest way to add support for a new device or to improve existing ones is to capture traffic between the mobile app and the device.
After capturing the traffic, you can either use the [softScheck's wireshark dissector](https://github.com/softScheck/tplink-smartplug#wireshark-dissector)
or the `parse_pcap.py` script contained inside the `devtools` directory.
Note, that this works currently only on kasa-branded devices which use port 9999 for communications.
## Supported devices
In principle, most kasa-branded devices that are locally controllable using the official Kasa mobile app work with this library.
The following lists the devices that have been manually verified to work.
**If your device is unlisted but working, please open a pull request to update the list and add a fixture file (use `python -m devtools.dump_devinfo` to generate one).**
### Plugs
* HS100
* HS103
* HS105
* HS107
* HS110
* KP100
* KP105
* KP115
* KP125
* KP125M [See note below](#newer-kasa-branded-devices)
* KP401
* EP10
* EP25 [See note below](#newer-kasa-branded-devices)
### Power Strips
* EP40
* HS300
* KP303
* KP200 (in wall)
* KP400
* KP405 (dimmer)
### Wall switches
* ES20M
* HS200
* HS210
* HS220
* KS200M (partial support, no motion, no daylight detection)
* KS220M (partial support, no motion, no daylight detection)
* KS230
### Bulbs
* LB100
* LB110
* LB120
* LB130
* LB230
* KL50
* KL60
* KL110
* KL120
* KL125
* KL130
* KL135
### Light strips
* KL400L5
* KL420L5
* KL430
### Tapo branded devices
The library has recently added a limited supported for devices that carry Tapo branding.
At the moment, the following devices have been confirmed to work:
#### Plugs
* Tapo P110
* Tapo P125M
* Tapo P135 (dimming not yet supported)
#### Bulbs
* Tapo L510B
* Tapo L510E
* Tapo L530E
#### Light strips
* Tapo L900-5
* Tapo L900-10
* Tapo L920-5
* Tapo L930-5
#### Wall switches
* Tapo S500D
* Tapo S505
### Newer Kasa branded devices
Some newer hardware versions of Kasa branded devices are now using the same protocol as
Tapo branded devices. Support for these devices is currently limited as per TAPO branded
devices:
* Kasa EP25 (plug) hw_version 2.6
* Kasa KP125M (plug)
* Kasa KS205 (Wifi/Matter Wall Switch)
* Kasa KS225 (Wifi/Matter Wall Dimmer Switch)
**If your device is unlisted but working, please open a pull request to update the list and add a fixture file (use `python -m devtools.dump_devinfo` to generate one).**
## Resources
### Developer Resources
* [softScheck's github contains lot of information and wireshark dissector](https://github.com/softScheck/tplink-smartplug#wireshark-dissector)
* [TP-Link Smart Home Device Simulator](https://github.com/plasticrake/tplink-smarthome-simulator)
* [Unofficial API documentation](https://github.com/plasticrake/tplink-smarthome-api)
* [Another unofficial API documentation](https://github.com/whitslack/kasa)
* [pyHS100](https://github.com/GadgetReactor/pyHS100) provides synchronous interface and is the unmaintained predecessor of this library.
### Library Users
* [Home Assistant](https://www.home-assistant.io/integrations/tplink/)
* [MQTT access to TP-Link devices, using python-kasa](https://github.com/flavio-fernandes/mqtt2kasa)
### TP-Link Tapo support
This library has recently added a limited supported for devices that carry Tapo branding.
That support is currently limited to the cli. The package `kasa.tapo` is in flux and if you
use it directly you should expect it could break in future releases until this statement is removed.
Other TAPO libraries are:
* [PyTapo - Python library for communication with Tapo Cameras](https://github.com/JurajNyiri/pytapo)
* [Tapo P100 (Tapo plugs, Tapo bulbs)](https://github.com/fishbigger/TapoP100)
* [Home Assistant integration](https://github.com/fishbigger/HomeAssistant-Tapo-P100-Control)
* [plugp100, another tapo library](https://github.com/petretiandrea/plugp100)
* [Home Assistant integration](https://github.com/petretiandrea/home-assistant-tapo-p100)