674 Commits

Author	SHA1	Message	Date
Steven B	faf90dde64	Fix cli discover config	2025-01-21 14:16:09 +00:00
Steven B	305e732238	Update to use http port from discovery if present	2025-01-21 13:49:23 +00:00
Teemu Rytilahti	e163f5f61e	Add RV30 Max fixture using klap ... map names and area names are scrubbed manually. note that there is no redactor for "name" as it is used in other contexts, too...	2025-01-20 21:16:14 +01:00
Teemu Rytilahti	6b2a284d42	Fix broken rebase	2025-01-20 19:19:42 +01:00
Teemu Rytilahti	c1ea380703	Pass sslcontext for post requests, direct c&p from sslaestransport	2025-01-20 19:19:42 +01:00
Teemu Rytilahti	d356ab1d60	Fix deviceencryptiontype import	2025-01-20 19:19:42 +01:00
Teemu Rytilahti	05ad95104c	Use SslTransport only if encryption_type is AES, log the config and support SMART.KLAP.HTTPS	2025-01-20 19:19:42 +01:00
Teemu Rytilahti	3da27a5f22	allow https for klaptransport	2025-01-20 19:19:42 +01:00
Teemu R.	a03a4b1d63	Add consumables module for vacuums (#1327) ... Co-authored-by: Steven B <51370195+sdb9696@users.noreply.github.com>	2025-01-20 12:50:39 +00:00
Teemu R.	05085462d3	Add support for cleaning records (#945) ... Co-authored-by: Steven B. <51370195+sdb9696@users.noreply.github.com>	2025-01-20 11:41:56 +00:00
Teemu R.	bca5576425	Add support for pairing devices with hubs (#859) ... Co-authored-by: Steven B. <51370195+sdb9696@users.noreply.github.com>	2025-01-20 10:36:06 +00:00
DawidPietrykowski	fd6067e5a0	Add smartcam pet detection toggle module (#1465)	2025-01-18 12:58:26 +00:00
Teemu R.	980f6a38ca	Add childlock module for vacuums (#1461) ... Add new configuration feature: ``` Child lock (child_lock): False ``` --------- Co-authored-by: Steven B. <51370195+sdb9696@users.noreply.github.com>	2025-01-17 12:15:51 +00:00
Teemu R.	773801cad5	Add setting to change carpet clean mode (#1458) ... Add new setting to control carpet clean mode: ``` == Configuration == Carpet clean mode (carpet_clean_mode): Normal *Boost* ```	2025-01-15 19:35:41 +00:00
Teemu R.	d27697c50f	Add ultra mode (fanspeed = 5) for vacuums (#1459)	2025-01-15 19:11:10 +00:00
Steven B.	b23019e748	Enable dynamic hub child creation and deletion on update (#1454)	2025-01-15 19:10:32 +00:00
Teemu R.	17356c10f1	Add mop module (#1456) ... Adds the following new features: a setting to control water level and a sensor if the mop is attached: ``` Mop water level (mop_waterlevel): *Disable* Low Medium High Mop attached (mop_attached): True ```	2025-01-15 19:12:33 +01:00
Teemu R.	bc97c0794a	Add setting to change clean count (#1457) ... Adds a setting to change the number of times to clean: ``` == Configuration == Clean count (clean_count): 1 (range: 1-3) ```	2025-01-15 19:11:33 +01:00
Teemu R.	2ab42f59b3	Fallback to is_low for batterysensor's battery_low (#1420) ... Fallback to `is_low` if `at_low_battery` is not available.	2025-01-15 14:33:05 +01:00
Teemu R.	1355e85f8e	Expose current cleaning information (#1453) ... Add new sensors to show the current cleaning state: ``` Cleaning area (clean_area): 0 0 Cleaning time (clean_time): 0:00:00 Cleaning progress (clean_progress): 100 % ```	2025-01-15 14:20:19 +01:00
Steven B.	4e7e18cef1	Add battery module to smartcam devices (#1452)	2025-01-14 21:57:35 +00:00
Teemu R.	2542516009	Add vacuum speaker controls (#1332) ... Implements `speaker` and adds the following features: * `volume` to control the speaker volume * `locate` to play "I'm here sound"	2025-01-14 16:48:34 +00:00
Teemu R.	3c98efb015	Implement vacuum dustbin module (dust_bucket) (#1423) ... Initial implementation for dustbin auto-emptying. New features: - `dustbin_empty` action to empty the dustbin immediately - `dustbin_autocollection_enabled` to toggle the auto collection - `dustbin_mode` to choose how often the auto collection is performed	2025-01-14 17:30:18 +01:00
Steven B.	68f50aa763	Allow update of camera modules after setting values (#1450)	2025-01-14 15:11:12 +00:00
Steven B.	d03f535568	Fix discover cli command with host (#1437)	2025-01-14 14:47:52 +00:00
Teemu R.	1be87674bf	Initial support for vacuums (clean module) (#944) ... Adds support for clean module: - Show current vacuum state - Start cleaning (all rooms) - Return to dock - Pausing & unpausing - Controlling the fan speed --------- Co-authored-by: Steven B <51370195+sdb9696@users.noreply.github.com>	2025-01-14 15:35:09 +01:00
Steven B.	be34dbd387	Make uses_http a readonly property of device config (#1449) ... `uses_http` will no longer be included in `DeviceConfig.to_dict()`	2025-01-14 14:20:53 +00:00
Steven B.	589d15091a	Add smartcam child device support for smartcam hubs (#1413)	2025-01-14 08:38:04 +00:00
Steven B.	a211cc0af5	Update hub children on first update and delay subsequent updates (#1438)	2025-01-13 17:19:40 +00:00
Teemu R.	6420d76351	ssltransport: use debug logger for sending requests (#1443)	2025-01-12 17:06:48 +01:00
Steven B.	660b9f81de	Add more redactors for smartcams (#1439) ... `alias` and `ext_addr` are new fields found on `smartcam` child devices	2025-01-10 18:34:11 +00:00
Steven B.	7b3dde9aa0	Raise errors on single smartcam child requests (#1427)	2025-01-06 16:11:43 +00:00
J. Nick Koston	7d508b5092	Backoff after xor timeout and improve error reporting (#1424)	2025-01-06 14:00:23 +00:00
Teemu R.	48a07a2970	Use repr() for enum values in Feature.__repr__ (#1414) ... Instead of simply displaying the enum value, use repr to get a nicer output for the cli. Was: `Error (vacuum_error): 14` Now: `Error (vacuum_error): <ErrorCode.DustBinRemoved: 14>`	2025-01-06 13:23:02 +01:00
Steven B.	6aa019280b	Handle smartcam partial list responses (#1411)	2025-01-06 09:23:46 +00:00
Steven B.	6e0be2ea1f	Add support for Tapo hub-attached switch devices (#1421) ... Required for #1419 and #1418	2025-01-04 14:20:06 +01:00
Teemu R.	e097b45984	Improve exception messages on credential mismatches (#1417)	2025-01-04 10:06:26 +00:00
Steven B.	0a95a41ab6	Update SslAesTransport for older firmware versions (#1362) ... Older firmware versions do not encrypt the payload. Tested to work with C110 hw 2.0 fw 1.3.7 Build 230823 Rel.57279n(5553) --------- Co-authored-by: Teemu R. <tpr@iki.fi>	2025-01-03 21:00:57 +01:00
Teemu R.	883d52209e	Fix incorrect obd src echo (#1412)	2025-01-03 18:07:46 +00:00
Steven B.	361697a239	Change smartcam detection features to category config (#1402)	2025-01-03 07:08:23 +00:00
Steven B.	8418ba3eef	Treat smartcam 500 errors after handshake as retryable (#1395) ... `smartcam` devices can respond with 500 if another session is created from the same host	2024-12-20 19:23:18 +00:00
Steven B.	93ca3ad2e1	Handle smartcam device blocked response (#1393) ... Devices that have failed authentication multiple times due to bad credentials go into a blocked state for 30 mins. Handle that as a different error type instead of treating it as a normal `AuthenticationError`.	2024-12-20 14:55:15 +00:00
Steven B.	296af3192e	Handle KeyboardInterrupts in the cli better (#1391) ... Addresses an issue with how `asyncclick` deals with `KeyboardInterrupt` errors. Instead of the `click.main` receiving `KeyboardInterrupt` it receives `CancelledError` because it's a task running inside the loop. Also ensures that discovery catches the `CancelledError` and closes the http clients.	2024-12-20 14:21:38 +01:00
Teemu R.	fe88b52e19	Fallback to other module data on get_energy_usage errors (#1245) ... - The `get_energy_usage` query can fail if the device time is not set because the response includes the device time. - Make `get_energy_usage` an optional query response so the energy module can fall back to getting the power from `get_emeter_data` or `get_current_power` on error. - Devices on `energy_monitoring` version 1 still fail as they have no additional queries to fall back to.	2024-12-20 08:53:07 +00:00
Steven B.	83eb73cc7f	Add rssi and signal_level to smartcam (#1392)	2024-12-20 06:16:18 +00:00
Steven B.	d890b0a3ac	Add smartcam detection modules (#1389) ... - Motion detection - Person detection - Tamper detection - Baby Cry Detection	2024-12-20 00:22:08 +01:00
Steven B.	b5f49a3c8a	Fix lens mask required component and state (#1386) ... Fixes a few issues with the lens mask since migrating it into its own module: - The module didn't provide itself as the container and hence the feature was accessing the same properties on the device. - `enabled` getter on the module incorrect but not picked up due to the previous issue. - No `REQUIRED_COMPONENT` set to ensure the module only created if available. Also changes attribute names to `enabled` from `state` to avoid confusion with device states.	2024-12-19 14:52:25 +01:00
Steven B.	ba273f308e	Add LensMask module to smartcam (#1385) ... Ensures no error with devices that do not have the `lens_mask` component.	2024-12-17 20:15:42 +00:00
Teemu R.	37ef7b0463	cli: print model, https, and lv for discover list (#1339) ... ``` kasa --target 192.168.xx.xx discover list HOST MODEL DEVICE FAMILY ENCRYPT HTTPS LV ALIAS 192.168.xxx.xxx KP115(EU) IOT.SMARTPLUGSWITCH XOR 0 - Fridge 192.168.xxx.xxx L900-5 SMART.TAPOBULB KLAP 0 2 L900 192.168.xxx.xxx P115 SMART.TAPOPLUG AES 0 2 Nightdesk 192.168.xxx.xxx TC65 SMART.IPCAMERA AES 1 2 Tapo_TC65_B593 ``` Also handles `TimeoutError` and `Exception` during `update()` --------- Co-authored-by: Steven B <51370195+sdb9696@users.noreply.github.com>	2024-12-17 21:09:17 +01:00
Steven B.	fe072657b4	Simplify get_protocol to prevent clashes with smartcam and robovac (#1377)	2024-12-17 07:39:17 +00:00