Address the inconsistent naming of smart modules by removing all "Module" suffixes and aligning filenames with class names. Removes the casting of modules to the correct module type now that is is redundant. Update the adding of iot modules to use the ModuleName class rather than a free string.
* Expose current and latest firmware as features
* Provide API to get information about available firmware updates (e.g., changelog, release date etc.)
* Implement updating the firmware
Support the `light_effect` module which allows setting the effect to Off
or Party or Relax. Uses the new `Feature.Type.Choice`. Does not
currently allow editing of effects.
This adds a test to check that all feature.set_value() calls will cause
a query, i.e., that there are no self.call()s that are not awaited, and
fixes existing code in this context.
This also fixes an issue where it was not possible to print out the
feature if the value threw an exception.
This improves the temperature control features to allow implementing
climate platform support for homeassistant.
Also adds frostprotection module, which is also used to turn
the thermostat on and off.
Enables the Fan interface for devices supporting that component.
Currently the only device with a fan is the ks240 which implements it as
a child device. This PR adds a method `get_module` to search the child
device for modules if it is a WallSwitch device type.
This can be used to hint how the sensor value should be rounded when
displaying it to users.
The values are adapted from the values used by homeassistant.
In order to support the ks240 which has children for the fan and light
components, this PR adds those modules at the parent level and hides the
children so it looks like a single device to consumers. It also decides
which modules not to take from the child because the child does not
support them even though it say it does. It does this for now via a
fixed list, e.g. `Time`, `Firmware` etc.
Also adds fixtures from two versions and corresponding tests.
Moves `FeatureType` into `Feature` to make it easier to use the API.
This also enforces that no invalid types are accepted (i.e.,
`Category.Config` cannot be a `Sensor`)
If `--verbose` is used with the cli tool, some extra information is
displayed for features when in the state command.
Adds `FeatureType.Action` making it possible to expose features like
"reboot", "test alarm", "pair" etc.
The `attribute_getter` is no longer mandatory, but it will raise an
exception if not defined for other types than actions.
Trying to read returns a static string `<Action>`.
This overloads the `set_value` to call the given callable on any value.
This also fixes the `play` and `stop` coroutines of the alarm module to
await the call.
Initial implementation for feature categories to help downstreams and
our cli tool to categorize the data for more user-friendly manner. As
more and more information is being exposed through the generic features
interface, it is necessary to give some hints to downstreams about how
might want to present the information to users.
This is not a 1:1 mapping to the homeassistant's mental model, and it
will be necessary to fine-tune homeassistant-specific parameters by
other means to polish the presentation.
Devices not connected to the internet will either error when querying
firmware queries (e.g. P300) or return misleading information (e.g.
P100). This PR adds the cloud connect query to the initial queries and
bypasses the firmware module if not connected.
Add SMART.KASAHUB to the map of supported devices.
This also adds fixture files for KH100, KE100, and T310, and adapts affected modules and their tests accordingly.
---------
Co-authored-by: Steven B <51370195+sdb9696@users.noreply.github.com>
Also updates CI pypy versions to be 3.9 and 3.10 which are the currently
[supported
versions](https://www.pypy.org/posts/2024/01/pypy-v7315-release.html).
Otherwise latest cryptography doesn't ship with pypy3.8 wheels and is
unable to build on windows.
Also updates the `codecov-action` to v4 which fixed some intermittent
uploading errors.
Allow controlling the color temperature via features interface:
```
$ kasa --host 192.168.xx.xx feature color_temperature
Color temperature (color_temperature): 0
$ kasa --host 192.168.xx.xx feature color_temperature 2000
Setting color_temperature to 2000
Raised error: Temperature should be between 2500 and 6500, was 2000
Run with --debug enabled to see stacktrace
$ kasa --host 192.168.xx.xx feature color_temperature 3000
Setting color_temperature to 3000
$ kasa --host 192.168.xx.xx feature color_temperature
Color temperature (color_temperature): 3000
```
This improves the initial update cycle to fetch the information as early
as possible and avoid requesting unnecessary information (like the child
component listing) in every subsequent call of `update()`.
The initial update performs the following steps:
1. `component_nego` (for components) and `get_device_info` (for common
device info) are requested as first, and their results are stored in the
internal state to allow individual modules (like colortemp) to access
the data during the initialization later on.
2. If `child_device` component is available, the child device list and
their components is requested separately to initialize the children.
3. The modules are initialized based on component lists, making the
queries available for the regular `update()`.
4. Finally, a query requesting all module-defined queries is executed,
including also those that we already did above, like the device info.
All subsequent updates will only involve queries that are defined by the
supported modules. This also means that we do not currently support
adding & removing child devices on the fly.
The internal state contains now only the responses for the most recent
update (i.e., no component information is directly available anymore,
but needs to be accessed separately if needed). If component information
is wanted from homeassistant users via diagnostics reports, the
diagnostic platform needs to be adapted to acquire this separately.
Previously, only v1 of on_off_gradually is supported, and the newer versions are not backwards compatible.
This PR adds support for the newer versions of the component, and implements `number` type for `Feature` to expose the transition time selection.
This also adds a new `supported_version` property to the main module API.
Adds initial support for H100 and its alarmmodule.
Also implements the following modules for T315:
* reportmodule (reporting interval)
* battery
* humidity
* temperature
* Initialize children's modules (and features) using the child component negotiation results
* Set device_type based on the device response
* Print out child features in cli 'state'
* Add --child option to cli 'command' to allow targeting child devices
* Guard "generic" features like rssi, ssid, etc. only to devices which have this information
Note, we do not currently perform queries on child modules so some data may not be available. At the moment, a stop-gap solution to use parent's data is used but this is not always correct; even if the device shares the same clock and cloud connectivity, it may have its own firmware updates.
Adds auto-off implementation. The feature stays enabled after the timer runs out, and it will start the countdown if the device is turned on again without explicitly disabling it.
New features:
* Switch to select if enabled: `Auto off enabled (auto_off_enabled): False`
* Setting to change the delay: `Auto off minutes (auto_off_minutes): 222`
* If timer is active, datetime object when the device gets turned off: `Auto off at (auto_off_at): None`
The initial steps to modularize the smartdevice. Modules are initialized based on the component negotiation, and each module can indicate which features it supports and which queries should be run during the update cycle.
