Previously, only v1 of on_off_gradually is supported, and the newer versions are not backwards compatible.
This PR adds support for the newer versions of the component, and implements `number` type for `Feature` to expose the transition time selection.
This also adds a new `supported_version` property to the main module API.
Adds initial support for H100 and its alarmmodule.
Also implements the following modules for T315:
* reportmodule (reporting interval)
* battery
* humidity
* temperature
* Initialize children's modules (and features) using the child component negotiation results
* Set device_type based on the device response
* Print out child features in cli 'state'
* Add --child option to cli 'command' to allow targeting child devices
* Guard "generic" features like rssi, ssid, etc. only to devices which have this information
Note, we do not currently perform queries on child modules so some data may not be available. At the moment, a stop-gap solution to use parent's data is used but this is not always correct; even if the device shares the same clock and cloud connectivity, it may have its own firmware updates.
If a handshake session becomes invalid the device returns 403 on send and an `AuthenticationError` is raised which prevents a retry, however a retry would be successful. In HA this causes devices to go into reauth flow which is not necessary.
With the move towards autodetecting available features, there is no reason to keep SmartPlug around.
kasa.smart.SmartPlug is removed in favor of kasa.smart.SmartDevice which offers the same functionality.
Information about auto_off can be accessed using Features of the AutoOffModule on supported devices.
Co-authored-by: Steven B. <51370195+sdb9696@users.noreply.github.com>
Adds auto-off implementation. The feature stays enabled after the timer runs out, and it will start the countdown if the device is turned on again without explicitly disabling it.
New features:
* Switch to select if enabled: `Auto off enabled (auto_off_enabled): False`
* Setting to change the delay: `Auto off minutes (auto_off_minutes): 222`
* If timer is active, datetime object when the device gets turned off: `Auto off at (auto_off_at): None`
The initial steps to modularize the smartdevice. Modules are initialized based on the component negotiation, and each module can indicate which features it supports and which queries should be run during the update cycle.
This adds a generic interface for all device classes to introspect available device features,
that is necessary to make it easier to support a wide variety of supported devices with different set of features.
This will allow constructing generic interfaces (e.g., in homeassistant) that fetch and change these features without hard-coding the API calls.
`Device.features()` now returns a mapping of `<identifier, Feature>` where the `Feature` contains all necessary information (like the name, the icon, a way to get and change the setting) to present and change the defined feature through its interface.
* Fix for P100 on fw 1.1.3 login_version none
* Fix coverage
* Add delay before trying default login
* Move devtools and fixture out
* Change logging string
Co-authored-by: Teemu R. <tpr@iki.fi>
* Fix test
---------
Co-authored-by: Teemu R. <tpr@iki.fi>
* Fix discovery cli to print devices not printed during discovery
* Fix tests
* Fix print exceptions not being propagated
* Fix tests
* Reduce test discover_send time
* Simplify wait logic
* Add tests
* Remove sleep loop and make auth failed a list
* Separate fake protocols for iot and smart
* Move control_child impl into its own method
* Organize schemas into correct places
* Add test_childdevice
* Add missing return for _handle_control_child
* Add ChildDevice and ChildProtocolWrapper
* Initialize & update children
* Fix circular imports
* Add dummy_protocol fixture and tests for unwrapping responseData
* Use dummy_protocol for existing smartprotocol tests
* Move _ChildProtocolWrapper to smartprotocol.py
* Use dummy_protocol for test multiple requests
* Use device_id instead of position for selecting the child
* Fix wrapping for regular requests
* Remove unused imports
* tweak
* rename child_device to childdevice
* Fix import
* Enable batching of multiple requests
* Test for debug enabled outside of loop
* tweaks
* tweaks
* tweaks
* Update kasa/smartprotocol.py
Co-authored-by: Teemu R. <tpr@iki.fi>
* revert
* Update pyproject.toml
* Add batch test and make batch_size configurable
---------
Co-authored-by: J. Nick Koston <nick@koston.org>
Co-authored-by: Teemu R. <tpr@iki.fi>
* Renew the KLAP handshake session 20 minutes before we think it will expire
Currently we assumed the clocks were perfectly aligned and the handshake
session lasted 20 hours. We now add a 20 minute buffer
* use timeout cookie when available
* Add new cli command 'command' to execute arbitrary commands
This deprecates 'raw-command', which requires positional argument for module,
in favor of new 'command' that accepts '--module' option for IOT devices.
* Pull block list to the module level
* Allow raw-command and wifi without update
* Call update always but on wifi&raw-command
* Add tests
* Skip update also if device_family was defined, as device factory performs an update
* dump_devinfo improvements
* Scrub only the last three bytes for mac addresses
* Add --target to allow creating fixtures based on discovery
* Save fixtures directly to correct location, add --basedir to allow defining the location of repository root
* Add --autosave to disable prompting for saving
* Update fixtures for devices I have
* Add fixture for HS110 hw 4.0 fw 1.0.4
* Improve help strings
* Fix tests
* Update devtools README
* Default to discovery if no host/target given
* Fix connection indeterminate state on cancellation
If the task the query is running in it cancelled, we do
know the state of the connection so we must close. Previously
we would not close on BaseException which could result
in reading the previous response if the previous query was
cancelled after the request had been sent
* add test for cancellation
* Avoid linear search for emeter realtime and emeter_today
Most of the time the data we want is at the end of the
list so we now search backwards to avoid having to
scale all the data and throw most of it away
* more tweaks
* coverage
* coverage
* preen
* coverage
* branch cover
* Pull has_emeter property up to tapodevice base class
This will also use the existence of energy_monitoring in the component_nego query to decide if the device has the service.
* Move emeter related functions to tapodevice
* Remove supported_modules override for now
This should be done in a separate PR, if we want to expose the available components to cli and downstreams
* Dedent extra reqs
* Move extra_reqs initialization
* Fix tests
* Do login entirely within AesTransport
* Remove login and handshake attributes from BaseTransport
* Add AesTransport tests
* Synchronise transport and protocol __init__ signatures and rename internal variables
* Update after review
- Show discovery results for unsupported devices and devices that fail to authenticate.
- Rename `--show-unsupported` to `--verbose`.
- Remove separate `--timeout` parameter from cli discovery so it's not confused with `--timeout` now added to cli command.
- Add tests.
This fixes changing the color for L530:
* If color temp is set on the device, it overrides any hue/sat settings. We override it to zero which seems to work.
* L530 does not allow None/null for brightness, so we avoid passing it on to the device.
* Add KP125M fixture. Enable tapo auth in pytest.
* authentication is not just for tapo
* Use "##MASKEDNAME##" base64 for nickname and ssid.
---------
Co-authored-by: Teemu R. <tpr@iki.fi>
* Add support for tapo light bulbs
* Use TapoDevice for on/off
* Add tapobulbs to discovery
* Add partial support for effects
Activating the effect does not work as I thought it would,
but this implements rest of the interface from SmartLightStrip.
* Add missing __init__ for tapo package
* Make mypy happy
* Add docstrings to make ruff happy
* Implement state_information and has_emeter
* Import tapoplug from kasa.tapo package
* Add tapo L530 fixture
* Enable tests for L530 fixture
* Make ruff happy
* Update fixture filename
* Raise exceptions on invalid parameters
* Return results in a wrapped dict
* Implement set_*
* Reorganize bulbs to iot&smart, fix tests for smarts
* Fix linting
* Fix BULBS_LIGHT_STRIP back to LIGHT_STRIPS
* Add support for TAPO/SMART KLAP and seperate transports from protocols
* Add tests and some review changes
* Update following review
* Updates following review
* Fix dump_devinfo and add discovery_result to json
* Update following review. Do not serialize aliases.
* Delete kasa/tests/fixtures/HS100(UK)_1.0_1.2.6.json
This refactors `Discover.connect_single` by moving device instance construction into a separate device factory module.
New `SmartDevice.connect(host, *, port, timeout, credentials, device_type)` class method replaces the functionality of `connect_single`,
and also now allows constructing device instances without relying on UDP discovery for type discovery if `device_type` parameter is set.
---------
Co-authored-by: Teemu R. <tpr@iki.fi>
* Add support for the new encryption protocol
This adds support for the new TP-Link discovery and encryption
protocols. It is currently incomplete - only devices without
username and password are current supported, and single device
discovery is not implemented.
Discovery should find both old and new devices. When accessing
a device by IP the --klap option can be specified on the command
line to active the new connection protocol.
sdb9696 - This commit also contains 16 later commits from Simon Wilkinson
squashed into the original
* Update klap changes 2023 to fix encryption, deal with kasa credential switching and work with new discovery changes
* Move from aiohttp to httpx
* Changes following review comments
---------
Co-authored-by: Simon Wilkinson <simon@sxw.org.uk>
Display an error if both --alias and --host are defined to avoid ambiguous target device:
```
❯ kasa --host 123 --alias 123 state
Usage: kasa [OPTIONS] COMMAND [ARGS]...
Try 'kasa --help' for help.
Error: Use either --alias or --host, not both.
```
Also, use `click.BadOptionUsage` consistently for other errors, like when only `--username` or `--password` is given.
Several KASA devices seem to have pretty strict buffer size limitations on incoming/outgoing data transfers.
Testing on KL125-US and HL103 has shown that sending a request size larger than about ~768 bytes will immediately crash the device. Additionally, a query that generates a response larger than ~4096 bytes will crash the KL125-US. I was unable to generate such a large response to test the HL103.
The KL125-US will only return such large queries when its monthly usage stats have been populated. This means that a new bulb would work fine, but after a month of data collection the bulb would break the 4K limit and start to crash.
To work around this issue, an estimated worst-case response size is calculated before sending a request by summing up all modules estimated response size. If the estimated size is greater than the device's max_response_payload_size then the query will be split into multiple queries.
This PR implements splitting queries expected to have large responses and also removes the module 'skip list' which was a previous workaround to the crash (which worked by simply reducing the number of modules queried, which prevented the overflow) since it is no longer necessary.
This PR does not attempt to address the "input buffer size limit." Thus far this limit has not been an issue.
* Add plumbing for passing credentials as far as discovery
* Pass credentials to Smart devices
* Rename authentication exception
* Fix tests failure due to test_json_output leaving echo as nop
* Fix test_credentials test
* Do not print credentials, fix echo function bug and improve get type parameter
* Add device class constructor test
* Add comment for echo handling and move assignment
asyncio.wait_for has some underlying problems that are only fixed in cpython 3.12.
Use async_timeout instead until the minimum supported version is 3.11+ and it can be replaced with asyncio.timeout
See https://github.com/python/cpython/pull/98518
* commented out modules that break
* added exclusion logic to smartdevice.py
* cleaning up a name
* removing test fixture that isn't related to this PR
* incorporating PR feedback
* fixed an if statement
* reduced exclusion list to just 'cloud'
* Tidy up the issue comment
Co-authored-by: Teemu R. <tpr@iki.fi>
* this seems to be what the linter whats
---------
Co-authored-by: Teemu R. <tpr@iki.fi>
* Drop python 3.7 support
* CI: drop 3.7 and add 3.11
* Remove skipifs that were required for <3.8
* Use pypy-3.8 for CI, re-enable pypy for windows to see if it works now
* Bump readthedocs to use py3.8
* Remove py3.7 failure comment
* Mark mocked fixtures as such
* Use consistent filenames including the swver
* Remove executable bit
* Remove duplicate KL130(US)
* Remove unnecessary mocks where we have real ones available
* Fix filenames in tests
* Make hue, saturation and color_temp optional for smartbulbpresets
* Adjust bulb preset attributes for effect mode
* Don't send None values on save_preset
* Add tests for save_preset payloads
This will make --json to output relevant contents even when no command is defined (i.e., when calling 'kasa --host <host> --json' or 'kasa --target <bcast> --json'.
* Basic fix for issue: https://github.com/python-kasa/python-kasa/issues/373
Change usage module get_daystat and get_monthat to return dictionaries of date index: time values as spec'd instead of raw usage data. Output matches emeter module get_daystat and get_monthstat
* Fixed some formatting and lint warnings to comply with black/flake8
Use the new _convert function in emeter for all conversions rather than the one in smartdevice.py
Removed unused function _emeter_convert_emeter_data from smartdevice.py
* Added a first pass test module for testing the new usage conversion function
* Changes based on PR feedback
Tidied up some doc string comments
Added a check for explicit values from conversion function
* Rebase on top of current master, fix docstrings
---------
Co-authored-by: Teemu Rytilahti <tpr@iki.fi>
* adding cli option to delete rule
* resolving black linting issue
* simplifying command name
Co-authored-by: Teemu R. <tpr@iki.fi>
* updating rule filter
Co-authored-by: Teemu R. <tpr@iki.fi>
* Fix type hinting issue with call to click.Choice which takes a Sequence not dictionary. Convert TYPE_TO_CLASS keys to a list to pass in.
* Update kasa/cli.py
Co-authored-by: Teemu R. <tpr@iki.fi>
Co-authored-by: Jules Davis <jules@focalpointvr.com>
Co-authored-by: Teemu R. <tpr@iki.fi>
* Add KP125 test fixture and support note.
Signed-off-by: James Alseth <james@jalseth.me>
* mark KP125 having an emeter
Co-authored-by: Teemu R <tpr@iki.fi>
