638 Commits

Author	SHA1	Message	Date
Teemu Rytilahti	b027b1efa2	Cleanup a bit	2025-01-03 18:32:12 +01:00
Teemu Rytilahti	966b3dc2c7	Await calls	2025-01-03 18:32:12 +01:00
Teemu Rytilahti	0f9befc649	Initial support for vacuums (clean module)	2025-01-03 18:32:12 +01:00
Steven B.	361697a239	Change smartcam detection features to category config (#1402)	2025-01-03 07:08:23 +00:00
Steven B.	8418ba3eef	Treat smartcam 500 errors after handshake as retryable (#1395) ... `smartcam` devices can respond with 500 if another session is created from the same host	2024-12-20 19:23:18 +00:00
Steven B.	93ca3ad2e1	Handle smartcam device blocked response (#1393) ... Devices that have failed authentication multiple times due to bad credentials go into a blocked state for 30 mins. Handle that as a different error type instead of treating it as a normal `AuthenticationError`.	2024-12-20 14:55:15 +00:00
Steven B.	296af3192e	Handle KeyboardInterrupts in the cli better (#1391) ... Addresses an issue with how `asyncclick` deals with `KeyboardInterrupt` errors. Instead of the `click.main` receiving `KeyboardInterrupt` it receives `CancelledError` because it's a task running inside the loop. Also ensures that discovery catches the `CancelledError` and closes the http clients.	2024-12-20 14:21:38 +01:00
Teemu R.	fe88b52e19	Fallback to other module data on get_energy_usage errors (#1245) ... - The `get_energy_usage` query can fail if the device time is not set because the response includes the device time. - Make `get_energy_usage` an optional query response so the energy module can fall back to getting the power from `get_emeter_data` or `get_current_power` on error. - Devices on `energy_monitoring` version 1 still fail as they have no additional queries to fall back to.	2024-12-20 08:53:07 +00:00
Steven B.	83eb73cc7f	Add rssi and signal_level to smartcam (#1392)	2024-12-20 06:16:18 +00:00
Steven B.	d890b0a3ac	Add smartcam detection modules (#1389) ... - Motion detection - Person detection - Tamper detection - Baby Cry Detection	2024-12-20 00:22:08 +01:00
Steven B.	b5f49a3c8a	Fix lens mask required component and state (#1386) ... Fixes a few issues with the lens mask since migrating it into its own module: - The module didn't provide itself as the container and hence the feature was accessing the same properties on the device. - `enabled` getter on the module incorrect but not picked up due to the previous issue. - No `REQUIRED_COMPONENT` set to ensure the module only created if available. Also changes attribute names to `enabled` from `state` to avoid confusion with device states.	2024-12-19 14:52:25 +01:00
Steven B.	ba273f308e	Add LensMask module to smartcam (#1385) ... Ensures no error with devices that do not have the `lens_mask` component.	2024-12-17 20:15:42 +00:00
Teemu R.	37ef7b0463	cli: print model, https, and lv for discover list (#1339) ... ``` kasa --target 192.168.xx.xx discover list HOST MODEL DEVICE FAMILY ENCRYPT HTTPS LV ALIAS 192.168.xxx.xxx KP115(EU) IOT.SMARTPLUGSWITCH XOR 0 - Fridge 192.168.xxx.xxx L900-5 SMART.TAPOBULB KLAP 0 2 L900 192.168.xxx.xxx P115 SMART.TAPOPLUG AES 0 2 Nightdesk 192.168.xxx.xxx TC65 SMART.IPCAMERA AES 1 2 Tapo_TC65_B593 ``` Also handles `TimeoutError` and `Exception` during `update()` --------- Co-authored-by: Steven B <51370195+sdb9696@users.noreply.github.com>	2024-12-17 21:09:17 +01:00
Steven B.	fe072657b4	Simplify get_protocol to prevent clashes with smartcam and robovac (#1377)	2024-12-17 07:39:17 +00:00
Steven B.	d03a387a74	Add new methods to dump_devinfo (#1373) ... Adds `getMatterSetupInfo`, `getConnectStatus` and `scanApList`	2024-12-16 13:06:26 +00:00
Steven B.	e9109447a7	Add smartcam modules to package inits (#1376)	2024-12-16 13:20:26 +01:00
Steven B.	f8503e4df6	Force single for some smartcam requests (#1374) ... `onboarding` requests do not return the method key and need to be sent as single requests.	2024-12-15 16:03:12 +00:00
Steven B.	c439530f93	Add bare bones homekit modules smart and smartcam devices (#1370)	2024-12-14 13:34:58 +00:00
Steven B.	59e5073509	Update docs for new FeatureAttribute behaviour (#1365) ... Co-authored-by: Teemu R. <tpr@iki.fi>	2024-12-13 22:23:58 +01:00
Steven B.	2ca6d3ebe9	Add bare-bones matter modules to smart and smartcam devices (#1371)	2024-12-13 19:45:38 +00:00
Steven B.	223f3318ea	Use DeviceInfo consistently across devices (#1338) ... - Make model exclude region for `iot` devices. This is consistent with `smart` and `smartcam` devices. - Make region it's own attribute on `Device`. - Ensure that devices consistently use `_get_device_info` static methods for all information relating to device models. - Fix issue with firmware and hardware being the wrong way round for `smartcam` devices.	2024-12-13 12:37:13 +00:00
Steven B.	7709bb967f	Update cli, light modules, and docs to use FeatureAttributes (#1364)	2024-12-11 15:53:35 +00:00
Steven B.	f8a46f74cd	Pass raw components to SmartChildDevice init (#1363) ... Clean up and consolidate the processing of raw component query responses and simplify the code paths for creating smartcam child devices when supported.	2024-12-11 14:38:38 +00:00
Steven B.	8cb5c2e180	Update dump_devinfo for raw discovery json and common redactors (#1358) ... This PR does a few related things to dump_devinfo: - Store the raw discovery result in the fixture. - Consolidate redaction logic so it's not duplicated in dump_devinfo. - Update existing fixtures to: - Store raw discovery result under `result` - Use `SCRUBBED_CHILD_DEVICE_ID` everywhere - Have correct values as per the consolidated redactors.	2024-12-11 14:18:44 +01:00
Teemu R.	032cd5d2cc	Improve overheat reporting (#1335) ... Different devices and different firmwares report overheated status in different ways. Some devices indicate support for `overheat_protect` component, but there are devices that report `overheat_status` even when it is not listed. Some other devices use `overheated` boolean that was already previously supported, but this PR adds support for much more devices that use `overheat_status` for reporting. The "overheated" feature is moved into its own module, and uses either of the ways to report this information. This will also rename `REQUIRED_KEY_ON_PARENT` to `SYSINFO_LOOKUP_KEYS` and change its logic to check if any of the keys in the list are found in the sysinfo. ``` tpr@lumipyry ~/c/p/tests (fix/overheated)> ag 'overheat_protect' -c|wc -l 15 tpr@lumipyry ~/c/p/tests (fix/overheated)> ag 'overheated' -c|wc -l 38 tpr@lumipyry ~/c/p/tests (fix/overheated)> ag 'overheat_status' -c|wc -l 20 ``` --------- Co-authored-by: Steven B. <51370195+sdb9696@users.noreply.github.com>	2024-12-11 01:01:36 +01:00
Steven B.	bf8f0adabe	Return raw discovery result in cli discover raw (#1342) ... Add `on_discovered_raw` callback to Discover and adds a cli command `discover raw` which returns the raw json before serializing to a `DiscoveryResult` and attempting to create a device class.	2024-12-10 22:42:14 +00:00
Puxtril	cb89342be1	Add LinkieTransportV2 and basic IOT.IPCAMERA support (#1270) ... Add LinkieTransportV2 transport used by kasa cameras and a basic implementation for IOT.IPCAMERA (kasacam) devices. --------- Co-authored-by: Zach Price <pricezt@ornl.gov> Co-authored-by: Steven B <51370195+sdb9696@users.noreply.github.com> Co-authored-by: Teemu Rytilahti <tpr@iki.fi>	2024-12-07 00:06:58 +01:00
Steven B.	be8b7139b8	Fix update errors on hubs with unsupported children (#1344)	2024-12-06 11:01:44 +00:00
Steven B.	1c9ee4d537	Fix smartcam missing device id (#1343)	2024-12-06 09:40:44 +00:00
Steven B.	8814d94989	Provide alternative camera urls (#1316)	2024-12-05 16:49:35 +00:00
Steven B.	4eed945e00	Do not error when accessing smart device_type before update (#1319)	2024-12-05 09:14:45 +00:00
Teemu R.	9966c6094a	Add ssltransport for robovacs (#943) ... This PR implements a clear-text, token-based transport protocol seen on RV30 Plus (#937). - Client sends `{"username": "email@example.com", "password": md5(password)}` and gets back a token in the response - Rest of the communications are done with POST at `/app?token=<token>` --------- Co-authored-by: Steven B. <51370195+sdb9696@users.noreply.github.com>	2024-12-01 18:06:48 +01:00
Steven B.	5ef8f21b4d	Handle missing mgt_encryption_schm in discovery (#1318)	2024-11-29 15:23:16 +00:00
Steven B.	f71450b880	Do not error on smartcam hub attached smartcam child devices (#1314)	2024-11-26 11:37:14 +00:00
Teemu R.	0c755f7120	Include duration when disabling smooth transition on/off (#1313) ... Fixes #1309	2024-11-26 10:39:31 +00:00
Teemu R.	69e08c2385	Expose energy command to cli (#1307) ... Co-authored-by: Steven B <51370195+sdb9696@users.noreply.github.com>	2024-11-26 09:42:55 +00:00
Steven B.	3dfada7575	Add common Thermostat module (#977)	2024-11-26 09:37:15 +00:00
Steven B.	cb4e28394d	Update docs for the new module attributes has/get feature (#1301)	2024-11-26 08:38:20 +00:00
Steven B.	2bda54fcb1	Rename smartcamera to smartcam (#1300)	2024-11-23 09:07:47 +01:00
Steven B.	b525d6a35c	Annotate fan_speed_level of Fan interface (#1298)	2024-11-22 21:21:29 +01:00
Steven B.	37cc4da7b6	Allow getting Annotated features from modules (#1018) ... Co-authored-by: Teemu R. <tpr@iki.fi>	2024-11-22 07:52:23 +00:00
Steven B.	cae9decb02	Exclude __getattr__ for deprecated attributes from type checkers (#1294)	2024-11-21 18:40:13 +00:00
Steven B.	652b4e0bd7	Use credentials_hash for smartcamera rtsp url (#1293)	2024-11-21 18:39:15 +00:00
Teemu R.	f2ba23301a	Make discovery on unsupported devices less noisy (#1291)	2024-11-21 18:22:54 +00:00
Steven B.	5221fc07ca	Simplify omit http_client in DeviceConfig serialization (#1292) ... Related explanation: https://github.com/Fatal1ty/mashumaro/issues/264	2024-11-21 19:18:04 +01:00
Steven B.	879aca77d1	Update cli modify presets to support smart devices (#1295)	2024-11-21 19:10:18 +01:00
Ryan Nitcher	dab64e5d48	Add voltage and current monitoring to smart Devices (#1281)	2024-11-20 18:18:30 +00:00
Steven B.	0058ad9f2e	Remove pydantic dependency (#1289) ... Remove pydantic dependency in favor of mashumaro.	2024-11-20 15:19:12 +00:00
Steven B.	f7778aaa53	Migrate RuleModule to mashumaro (#1283) ... Also fixes a bug whereby multiple queries for the same module would overwrite each other.	2024-11-20 14:59:32 +00:00
Steven B.	955e7ab4d0	Migrate TurnOnBehaviours to mashumaro (#1285)	2024-11-20 15:35:51 +01:00