* Add KP125 test fixture and support note.
Signed-off-by: James Alseth <james@jalseth.me>
* mark KP125 having an emeter
Co-authored-by: Teemu R <tpr@iki.fi>
* Avoid retrying open_connection on unrecoverable errors
- We can retry so hard that we block the event loop
Fixes
```
2022-04-16 22:18:51 WARNING (MainThread) [asyncio] Executing <Task finished name=Task-3576 coro=<open_connection() done, defined at /opt/homebrew/Cellar/python@3.9/3.9.12/Frameworks/Python.framework/Versions/3.9/lib/python3.9/asyncio/streams.py:25> exception=ConnectionRefusedError(61, "Connect call failed (192.168.107.200, 9999)") created at /opt/homebrew/Cellar/python@3.9/3.9.12/Frameworks/Python.framework/Versions/3.9/lib/python3.9/asyncio/tasks.py:460> took 1.001 seconds
```
* comment
* Ensure state is restored when turning back on
Fixes https://github.com/home-assistant/core/issues/69039
* Update kasa/tests/test_bulb.py
Co-authored-by: Teemu R. <tpr@iki.fi>
Co-authored-by: Teemu R. <tpr@iki.fi>
* Added motion and light sensor for KS220M
* Added fixture file for ks220m
* Remove dump_devinfo and add the extra queries to devtools/dump_devinfo
* Test KS220M as a dimmer
* Add empty modules to baseproto to make the tests pass
Co-authored-by: mrbetta <bettale@gmail.com>
Co-authored-by: Teemu Rytilahti <tpr@iki.fi>
* Keep connection open and lock to prevent duplicate requests
* option to not update children
* tweaks
* typing
* tweaks
* run tests in the same event loop
* memorize model
* Update kasa/protocol.py
Co-authored-by: Teemu R. <tpr@iki.fi>
* Update kasa/protocol.py
Co-authored-by: Teemu R. <tpr@iki.fi>
* Update kasa/protocol.py
Co-authored-by: Teemu R. <tpr@iki.fi>
* Update kasa/protocol.py
Co-authored-by: Teemu R. <tpr@iki.fi>
* dry
* tweaks
* warn when the event loop gets switched out from under us
* raise on unable to connect multiple times
* fix patch target
* tweaks
* isrot
* reconnect test
* prune
* fix mocking
* fix mocking
* fix test under python 3.7
* fix test under python 3.7
* less patching
* isort
* use mocker to patch
* disable on old python since mocking doesnt work
* avoid disconnect/reconnect cycles
* isort
* Fix hue validation
* Fix latitude_i/longitude_i units
Co-authored-by: Teemu R. <tpr@iki.fi>
* Cleanup discovery & add tests
* discovered_devices_raw is not anymore available, as that can be accessed directly from the device objects
* test most of the discovery code paths
* some minor cleanups to test handling
* update discovery docs
* Move category check to be after the definitions
* skip a couple of tests requiring asyncmock not available on py37
* Remove return_raw usage from cli.discover
* bulb: allow set_hsv without v, add fallback ct range
* add ColorTempRange and HSV named tuples
* add a fallback color temp range if unknown, log a warning
* set_hsv: the value is now optional
* Fix tests, change fallback range to 2700-5000
* test_cli: provide return values to patched objects to avoid warning about non-awaited calls
* test_cli: restore alias after testing
* smartstrip: remove internal update() calls for turn_{on,off}, set_led
* Make sure power is always a float
* Fix discovery tests
* Make tests runnable on real devices
* Add a note about running tests on a real device
* test_strip: run update against the parent device
Some devices are known to fail when trying to query non-supported modules like emeter information.
This commit makes the initial update() only request the sysinfo, followed up by a second query
if emeter is supported by the device.
* Add real kasa KL430(UN) device dump
* Adjust hue&sat max values
* light strips, as bulbs, have only power for emeter
Co-authored-by: Teemu Rytilahti <tpr@iki.fi>
* Add EP10(US) 1.0 1.0.2 fixture
* Add EP10 fixture to conftest PLUGS list.
* Add EP10 to the list of supported plugs in README
* Revert "Add EP10 to the list of supported plugs in README"
This reverts commit e8bf6551c3.
* Preliminary support for light strips
* Add color temperature range and cleanup, thanks to @darkoppressor
* Use lightstrip instead of {led,light}strip consistently everywhere
* The cli flag is now --lightstrip
* add apidocs
* Add fixture file for KL430
Signed-off-by: Kevin Wells <darkoppressor@gmail.com>
* Add discovery support, expose effect and length of the strip
* use set_light_state instead of transition_light_state
* Add tests for lightstrip
* add doctests
* Add KL430 to supported devices in README
Co-authored-by: Kevin Wells <darkoppressor@gmail.com>
* Add ignore_default to lights to allow setting to specific light state, force bulb on when changing the settings, allow defining brightness for set_color_temp, add a couple of new API methods
* Fix and simplify transition_light_state to make tests pass
* Add doctests to SmartBulb
* Add SmartDevice doctests, cleanup README.md
* add doctests for smartplug and smartstrip
* add discover doctests
* Fix bulb mock
* add smartdimmer doctests
* add sphinx-generated docs, cleanup readme a bit
* remove sphinx-click as it does not work with asyncclick
* in preparation for rtd hooking, move doc deps to be separate from dev deps
* pytestmark needs to be applied separately for each and every file, this fixes the tests
* use pathlib for resolving relative paths
* Skip discovery doctest on python3.7
The code is just fine, but some reason the mocking behaves differently between 3.7 and 3.8.
The latter seems to accept a discrete object for asyncio.run where the former expects a coroutine..
* Adds a transition param to set_brightness(), turn_on(), and turn_off() that specifies the duration in milliseconds that the dimmer switch will take to transition to the new state.
* Fixes bug where set_brightness(0) was allowed even though the dimmer does not support it. Now brightness values of 0 are coerced to 1 to be consistent with bulbs (which do support brightness values of 0).
* Move tests to device-type specific test files to make improvements more approachable
* protocol: remove the port parameter from query, as there are no other known ports, fix docstrings
* Revise docstrings, remove superfluous information and remove unused methods ({set,get_icon} and set_time)
* cli: indent device output to make it more easily readable when having multiple devices
* remove adjust flake8 ignores (we have no setup.py anymore)
* pyproject: include cli tool to coverage, add config for interrogate (docstring coverage)
* bulb: raise exception on color_temp error cases instead of returning zero values
* improve bulb tests, simplify conftest
* strip: rename plugs property to children and move it to smartdevice
* Optimize I/O access
A single update() will now fetch information from all interesting modules,
including the current device state and the emeter information.
In practice, this will allow dropping the number of I/O reqs per homeassistant update cycle to 1,
which is paramount at least for bulbs which are very picky about sequential accesses.
This can be further extend to other modules/methods, if needed.
Currently fetched data:
* sysinfo
* realtime, today's and this months emeter stats
New properties:
* emeter_realtime: return the most recent emeter information, update()-version of get_emeter_realtime()
* emeter_today: returning today's energy consumption
* emeter_this_month: same for this month
Other changes:
* Accessing @requires_update properties will cause SmartDeviceException if the device has not ever been update()d
* Fix __repr__ for devices that haven't been updated
* Smartbulb uses now the state data from get_sysinfo instead of separately querying the bulb service
* SmartStrip's state_information no longer lists onsince for separate plugs
* The above mentioned properties are now printed out by cli
* Simplify is_on handling for bulbs
* remove implicit updates, return device responses for actions, update README.md instructions. fixes#61
