Addresses repeated SyntaxWarnings when running linters:
```
kasa/tests/test_bulb.py:254: SyntaxWarning: invalid escape sequence '\d'
ValueError, match="Temperature should be between \d+ and \d+, was 1000"
kasa/tests/test_bulb.py:258: SyntaxWarning: invalid escape sequence '\d'
ValueError, match="Temperature should be between \d+ and \d+, was 10000"
kasa/tests/test_common_modules.py:216: SyntaxWarning: invalid escape sequence '\d'
with pytest.raises(ValueError, match="Temperature should be between \d+ and \d+"):
kasa/tests/test_common_modules.py:219: SyntaxWarning: invalid escape sequence '\d'
with pytest.raises(ValueError, match="Temperature should be between \d+ and \d+"):
```
- Enable parallel tests in the CI with pytest-xdist
- Migrate to the official `astral-sh/setup-uv` github action
- Call `pre-commit` run as a single job in CI instead of relisting each
check
- Use `uv` version 0.4.16
- Fix bug with pre-commit cache
- Update `publish.yml` to use `astral-sh/setup-uv`
And read it from `device_config` if provided.
This is required as key generation can eat up cpu when a device is not fully available and the library is retrying.
To resolve issues with the calls to the tplink cloud to get the latest firmware.
Disables the automatic calling of `get_latest_fw` and requires firmware update checks to be triggered manually.
This will catch common issues with pytest code.
* Use `match` when using `pytest.raises()` for base exception types like
`TypeError` or `ValueError`
* Use tuples for `parametrize()`
* Enforces `pytest.raises()` to contain simple statements, using `noqa`
to skip this on some cases for now.
* Fixes incorrect exception type (valueerror instead of typeerror) for
iotdimmer.
* Adds check valid types for `iotbulb.set_hsv` and `color` smart module.
* Consolidate exception messages for common interface modules.
Passing this extra value caused the `ignore_default` check in the `IotBulb._set_light_state`
method to fail which causes the device to come back on to the default state.
Re-query failed modules after some delay instead of immediately disabling them.
Changes to features so they can still be created when modules are erroring.
Expose reboot through the feature interface.
This can be useful in situations where one wants to reboot the device,
e.g., in recent cases where frequent update calls will render the device
unresponsive after a specific amount of time.
Changes to the smart request handling:
- Do not send params if null
- Drop the requestId parameter
- get_preset_rules doesn't send parameters for preset component version less than 3
- get_led_info no longer sends the wrong parameters
- get_on_off_gradually_info no longer sends an empty {} parameter
Currently if the library encounters an invalid decryption error it
raises a value error. This PR wraps it in a KasaException so consumers
such as HA can catch an expected library exception.
Fixes an issue with L530 bulbs on HW version 1.0 whereby the light effect
query causes the device to crash with JSON_ENCODE_FAIL_ERROR after
approximately 60 calls.
Addresses stability issues on older hw device versions
- Handles module timeout errors better by querying modules individually on errors and disabling problematic modules like Firmware that go out to the internet to get updates.
- Addresses an issue with the Led module on P100 hardware version 1.0 which appears to have a memory leak and will cause the device to crash after approximately 500 calls.
- Delays updates of modules that do not have regular changes like LightPreset and LightEffect and enables them to be updated on the next update cycle only if required values have changed.
Instead of trying to use the first state when multiple are reported,
iterate over the known states and pick the first matching.
This will fix an issue where the device reports extra states (like
`low_battery`) while having a known mode active.
Related to https://github.com/home-assistant/core/issues/121335
PR with just the initial structural changes for the cli to be a package.
Subsequent PR will break out `main.py` into modules. Doing it in two
stages ensure that the commit history will be continuous for `cli.py` >
`cli/main.py`
Ensures that all modules try to access their data in `_post_update_hook` in a safe manner and disable themselves if there's an error.
Also adds parameters to get_preset_rules and get_on_off_gradually_info to fix issues with recent firmware updates.
[#1033](https://github.com/python-kasa/python-kasa/issues/1033)
Adds a new decorator that adds child options to a command and gets the
child device if the options are set.
- Single definition of options and error handling
- Adds options automatically to command
- Backwards compatible with `--index` and `--name`
- `--child` allows for id and alias for ease of use
- Omitting a value for `--child` gives an interactive prompt
Implements private `_update` to allow the CLI to patch a child `update`
method to call the parent device `update`.
Example help output:
```
$ kasa brightness --help
Usage: kasa brightness [OPTIONS] [BRIGHTNESS]
Get or set brightness.
Options:
--transition INTEGER
--child, --name TEXT Child ID or alias for controlling sub-
devices. If no value provided will show an
interactive prompt allowing you to select a
child.
--child-index, --index INTEGER Child index controlling sub-devices
--help Show this message and exit.
```
Fixes#769
If discovery is triggered without credentials and discovers devices requiring authentication,
blank credentials are used to initialise the protocols and no connection is actually made.
In this instance we should not return the credentials_hash for blank credentials as it will be invalid.
This PR changes the behavior of `brightness` module if an effect is
active.
Currently, changing the brightness disables the effect when the
brightness is changed, this fixes that.
This will also improve the `set_effect` interface to use the current
brightness when an effect is activated.
* light_strip_effect: passing `bAdjusted` with the changed properties
changes the brightness.
* light_effect: the brightness is stored only in the rule, so we modify
it when adjusting the brightness. This is also done during the initial
effect activation.
---------
Co-authored-by: Steven B <51370195+sdb9696@users.noreply.github.com>
Fixes module to work with child devices, i.e. ks240
Interrogates the data to see whether maximums are available.
Fixes a bug whereby setting a duration while the feature is not
enabled does not actually enable it.
Makes unknown error codes to be reported through KasaException which may
be recoverable in some cases (i.e., a single command failing in the
multi request).
Related to https://github.com/home-assistant/core/issues/118446
Avoid unnecessary indentation of elements, now only the child device information is indented
Use _echo_all_features consistently for both state and feature
Avoid discovery log message which brings no extra value
Hide location by default
For some time I've noticed that my IDE is reporting mypy errors that the
pre-commit hook is not picking up. This is because [mypy
mirror](https://github.com/pre-commit/mirrors-mypy) runs in an isolated
pre-commit environment which does not have dependencies installed and it
enables `--ignore-missing-imports` to avoid errors.
This is [advised against by
mypy](https://mypy.readthedocs.io/en/stable/running_mypy.html#missing-library-stubs-or-py-typed-marker)
for obvious reasons:
> We recommend avoiding --ignore-missing-imports if possible: it’s
equivalent to adding a # type: ignore to all unresolved imports in your
codebase.
This PR configures the mypy pre-commit hook to run in the virtual
environment and addresses the additional errors identified as a result.
It also introduces a minimal mypy config into the `pyproject.toml`
[mypy errors identified without the fixes in this
PR](https://github.com/user-attachments/files/15896693/mypyerrors.txt)
Prevent the cli from allowing sub commands unless host or alias is specified.
It is unwise to allow commands to be run on an arbitrary set of discovered
devices so this PR shows an error if attempted.
Also consolidates other invalid cli operations to use a single error function
to display the error to the user.
Fixes issue with unpaired devices reporting light effect as `softAP`
reported in https://github.com/python-kasa/python-kasa/pull/972. I don't
think we need to handle that effect properly so just reports as off.
Adds an implementation of `_check_supported` to the light transition module so it is
not added to a parent device that reports it but doesn't support it, i.e. ks240.
Required for the P300 firmware update with `auto_off` module on child
devices. Will query child modules for parent devices that are not hubs.
Coverage will be fixed when the P300 fixture is added
https://github.com/python-kasa/python-kasa/pull/915
Replaces the logic to skip adding child modules to parent devices based
on whether a device is a wall switch and instead relies on the
`_check_supported` method. Is more future proof and will fix issue with
the P300 with child `auto_off` modules
https://github.com/python-kasa/python-kasa/pull/915 not supported on the
parent.
Executing wifi join requires passing the current time information for smart devices which we read from the device.
This PR removes wifi from the block list to make it work.
Picked this up while updating the [Fan platform
PR](https://github.com/home-assistant/core/pull/116605) for HA. The
smart fan module was not correctly deriving from the common interface
and the speed_level is reported as >0 when off.
Fixes an issue reported by @bdraco with the P100 not working in the
latest branch:
`[Errno None] Can not write request body for HOST_REDACTED,
ClientOSError(None, 'Can not write request body for
URL_REDACTED'))`
Issue caused by the number of multi requests going above the default
batch of 5 and the P100 not being able to handle the second multi
request happening immediately as it closes the connection after each
query (See https://github.com/python-kasa/python-kasa/pull/690 for
similar issue). This introduces a small wait time on concurrent requests
once the device has raised a ClientOSError.
Adds some device fixtures by courtesy of @jimboca, thanks!
This is a slightly patched and rebased version of #441.
---------
Co-authored-by: JimBo <jimboca3@gmail.com>
Co-authored-by: sdb9696 <steven.beth@gmail.com>
Adds username and password arguments to discovery to remove the need to import Credentials.
Creates TypeAliases in Device for connection configuration classes and DeviceType.
Using the API with these changes will only require importing either Discover or Device
depending on whether using Discover.discover() or Device.connect() to
initialize and interact with the API.
Starts structuring the documentation library usage into Tutorials, Guides, Explanations and Reference.
Continues migrating new docs from rst to markdown.
Extends the test framework discovery mocks to allow easy writing and testing of code examples.
For power strips, the autooff data needs to be requested from the
children.
Until we do that, we should not create these features to avoid crashing
during switch platform initialization.
This also ports the module to use `_initialize_features` and add tests.
This is allows a generic implementation for the switch platform in the
homeassistant integration.
Also elevates set_state(bool) to be part of the standard API.
PR contains a number of fixes from testing with HA devices:
- Fixes a bug with turning the light on and off via `set_state`
- Aligns `set_brightness` behaviour across `smart` and `iot` devices
such that a value of 0 is off.
- Aligns `set_brightness` behaviour for `IotDimmer` such that setting
the brightness turns on the device with a transition of 1ms. ([HA
comment](https://github.com/home-assistant/core/pull/117839#discussion_r1608720006))
- Fixes a typing issue in `LightState`.
- Adds `ColorTempRange` and `HSV` to `__init__.py`
- Adds a `state` property to the interface returning `LightState` for
validating `set_state` changes.
- Adds tests for `set_state`
Adds light preset common module for switching to presets and saving presets.
Deprecates the `presets` attribute and `save_preset` method from the `bulb`
interface in favour of the modular approach. Allows setting preset for `iot`
which was not previously supported.
Fixes the test framework to handle fixtures with incomplete lists better by checking for completeness and overriding the sum. Also adds a pytest-timeout dev dependency with timeout set to 10 seconds. Finally fixes smartprotocol to prevent an infinite loop if incomplete lists ever happens in the real world.
Co-authored-by: Teemu R. <tpr@iki.fi>
Add a tutorial module with examples that can be tested with `doctest`.
In order to simplify the examples they can be run with doctest allowing
top level await statements by adding a fixture to patch the builtins
that xdoctest uses to test code.
---------
Co-authored-by: Teemu R. <tpr@iki.fi>
Deprecates the attributes at device level for light, light effects, and led. i.e. device.led, device.is_color. Will continue to support consumers using these attributes and emit a warning.
Implements the `light_strip_lighting_effect` components for
`smart` devices. Uses a new list of effects captured from a L900 which
are similar to the `iot` effects but include some additional properties
and a few extra effects.
Assumes that a device only implements `light_strip_lighting_effect` or
`light_effect` but not both.
Address the inconsistent naming of smart modules by removing all "Module" suffixes and aligning filenames with class names. Removes the casting of modules to the correct module type now that is is redundant. Update the adding of iot modules to use the ModuleName class rather than a free string.
* Expose current and latest firmware as features
* Provide API to get information about available firmware updates (e.g., changelog, release date etc.)
* Implement updating the firmware
Passing in a string still works and returns either `IotModule` or
`SmartModule` type when called on `IotDevice` or `SmartDevice`
respectively. When calling on `Device` will return `Module` type.
Passing in a module type is then typed to that module, i.e.:
```py
smartdev.get_module(FanModule) # type is FanModule
smartdev.get_module("FanModule") # type is SmartModule
```
Only thing this doesn't do is check that you can't pass an `IotModule`
to a `SmartDevice.get_module()`. However there is a runtime check which
will return null if the passed `ModuleType` is not a subclass of
`SmartModule`.
Many thanks to @cdce8p for helping with this.
Support the `light_effect` module which allows setting the effect to Off
or Party or Relax. Uses the new `Feature.Type.Choice`. Does not
currently allow editing of effects.
This adds a test to check that all feature.set_value() calls will cause
a query, i.e., that there are no self.call()s that are not awaited, and
fixes existing code in this context.
This also fixes an issue where it was not possible to print out the
feature if the value threw an exception.
This improves the temperature control features to allow implementing
climate platform support for homeassistant.
Also adds frostprotection module, which is also used to turn
the thermostat on and off.
Brings consistency to the api across Smart and Iot so the interfaces can be used for their specialist methods as well as the device methods (e.g. turn_on/off).
The fixture now includes the queries returned directly from the child devices which is stored under child_devices along with valid device ids.
Also fixes a bug in the test_cli.py::test_wifi_scan which fails with more than 9 networks.
Enables the Fan interface for devices supporting that component.
Currently the only device with a fan is the ks240 which implements it as
a child device. This PR adds a method `get_module` to search the child
device for modules if it is a WallSwitch device type.
Pass a dummy object as context object as it will not be used by --help
anyway.
Also, allow defining --help anywhere in the argv, not just in the last
place.
This can be used to hint how the sensor value should be rounded when
displaying it to users.
The values are adapted from the values used by homeassistant.
Exposes IOT emeter information using features, bases on #843 to allow
defining the units.
---------
Co-authored-by: Steven B <51370195+sdb9696@users.noreply.github.com>
When devices have lists greater than 10 for child devices only the first
10 are returned. This retrieves the rest of the items (currently with
single requests rather than multiple requests)
In order to support the ks240 which has children for the fan and light
components, this PR adds those modules at the parent level and hides the
children so it looks like a single device to consumers. It also decides
which modules not to take from the child because the child does not
support them even though it say it does. It does this for now via a
fixed list, e.g. `Time`, `Firmware` etc.
Also adds fixtures from two versions and corresponding tests.
Moves `FeatureType` into `Feature` to make it easier to use the API.
This also enforces that no invalid types are accepted (i.e.,
`Category.Config` cannot be a `Sensor`)
If `--verbose` is used with the cli tool, some extra information is
displayed for features when in the state command.
Adds `FeatureType.Action` making it possible to expose features like
"reboot", "test alarm", "pair" etc.
The `attribute_getter` is no longer mandatory, but it will raise an
exception if not defined for other types than actions.
Trying to read returns a static string `<Action>`.
This overloads the `set_value` to call the given callable on any value.
This also fixes the `play` and `stop` coroutines of the alarm module to
await the call.
Initial implementation for feature categories to help downstreams and
our cli tool to categorize the data for more user-friendly manner. As
more and more information is being exposed through the generic features
interface, it is necessary to give some hints to downstreams about how
might want to present the information to users.
This is not a 1:1 mapping to the homeassistant's mental model, and it
will be necessary to fine-tune homeassistant-specific parameters by
other means to polish the presentation.
