Support the `light_effect` module which allows setting the effect to Off
or Party or Relax. Uses the new `Feature.Type.Choice`. Does not
currently allow editing of effects.
This adds a test to check that all feature.set_value() calls will cause
a query, i.e., that there are no self.call()s that are not awaited, and
fixes existing code in this context.
This also fixes an issue where it was not possible to print out the
feature if the value threw an exception.
This improves the temperature control features to allow implementing
climate platform support for homeassistant.
Also adds frostprotection module, which is also used to turn
the thermostat on and off.
Brings consistency to the api across Smart and Iot so the interfaces can be used for their specialist methods as well as the device methods (e.g. turn_on/off).
The fixture now includes the queries returned directly from the child devices which is stored under child_devices along with valid device ids.
Also fixes a bug in the test_cli.py::test_wifi_scan which fails with more than 9 networks.
Enables the Fan interface for devices supporting that component.
Currently the only device with a fan is the ks240 which implements it as
a child device. This PR adds a method `get_module` to search the child
device for modules if it is a WallSwitch device type.
Pass a dummy object as context object as it will not be used by --help
anyway.
Also, allow defining --help anywhere in the argv, not just in the last
place.
This can be used to hint how the sensor value should be rounded when
displaying it to users.
The values are adapted from the values used by homeassistant.
Exposes IOT emeter information using features, bases on #843 to allow
defining the units.
---------
Co-authored-by: Steven B <51370195+sdb9696@users.noreply.github.com>
When devices have lists greater than 10 for child devices only the first
10 are returned. This retrieves the rest of the items (currently with
single requests rather than multiple requests)
In order to support the ks240 which has children for the fan and light
components, this PR adds those modules at the parent level and hides the
children so it looks like a single device to consumers. It also decides
which modules not to take from the child because the child does not
support them even though it say it does. It does this for now via a
fixed list, e.g. `Time`, `Firmware` etc.
Also adds fixtures from two versions and corresponding tests.
Moves `FeatureType` into `Feature` to make it easier to use the API.
This also enforces that no invalid types are accepted (i.e.,
`Category.Config` cannot be a `Sensor`)
If `--verbose` is used with the cli tool, some extra information is
displayed for features when in the state command.
Adds `FeatureType.Action` making it possible to expose features like
"reboot", "test alarm", "pair" etc.
The `attribute_getter` is no longer mandatory, but it will raise an
exception if not defined for other types than actions.
Trying to read returns a static string `<Action>`.
This overloads the `set_value` to call the given callable on any value.
This also fixes the `play` and `stop` coroutines of the alarm module to
await the call.
Initial implementation for feature categories to help downstreams and
our cli tool to categorize the data for more user-friendly manner. As
more and more information is being exposed through the generic features
interface, it is necessary to give some hints to downstreams about how
might want to present the information to users.
This is not a 1:1 mapping to the homeassistant's mental model, and it
will be necessary to fine-tune homeassistant-specific parameters by
other means to polish the presentation.
Devices not connected to the internet will either error when querying
firmware queries (e.g. P300) or return misleading information (e.g.
P100). This PR adds the cloud connect query to the initial queries and
bypasses the firmware module if not connected.
Add SMART.KASAHUB to the map of supported devices.
This also adds fixture files for KH100, KE100, and T310, and adapts affected modules and their tests accordingly.
---------
Co-authored-by: Steven B <51370195+sdb9696@users.noreply.github.com>
When smart devices encounter an error during a multipleRequest they
return the previous successes and the current error and stop processing
subsequent requests. This checks the responses returned and
re-queries individually for any missing responses so that individual
errors do not break other components.
Also updates CI pypy versions to be 3.9 and 3.10 which are the currently
[supported
versions](https://www.pypy.org/posts/2024/01/pypy-v7315-release.html).
Otherwise latest cryptography doesn't ship with pypy3.8 wheels and is
unable to build on windows.
Also updates the `codecov-action` to v4 which fixed some intermittent
uploading errors.
This changes `state_information` to return the names and values of
all defined features.
It was originally a "temporary" hack to show some extra, device-specific
information in the cli tool, but now that we have device-defined
features we can leverage them.
Allow controlling the color temperature via features interface:
```
$ kasa --host 192.168.xx.xx feature color_temperature
Color temperature (color_temperature): 0
$ kasa --host 192.168.xx.xx feature color_temperature 2000
Setting color_temperature to 2000
Raised error: Temperature should be between 2500 and 6500, was 2000
Run with --debug enabled to see stacktrace
$ kasa --host 192.168.xx.xx feature color_temperature 3000
Setting color_temperature to 3000
$ kasa --host 192.168.xx.xx feature color_temperature
Color temperature (color_temperature): 3000
```
This improves the initial update cycle to fetch the information as early
as possible and avoid requesting unnecessary information (like the child
component listing) in every subsequent call of `update()`.
The initial update performs the following steps:
1. `component_nego` (for components) and `get_device_info` (for common
device info) are requested as first, and their results are stored in the
internal state to allow individual modules (like colortemp) to access
the data during the initialization later on.
2. If `child_device` component is available, the child device list and
their components is requested separately to initialize the children.
3. The modules are initialized based on component lists, making the
queries available for the regular `update()`.
4. Finally, a query requesting all module-defined queries is executed,
including also those that we already did above, like the device info.
All subsequent updates will only involve queries that are defined by the
supported modules. This also means that we do not currently support
adding & removing child devices on the fly.
The internal state contains now only the responses for the most recent
update (i.e., no component information is directly available anymore,
but needs to be accessed separately if needed). If component information
is wanted from homeassistant users via diagnostics reports, the
diagnostic platform needs to be adapted to acquire this separately.
This should prevent child fixtures from hubs breaking tests due to
missing discovery info. To get these devices in `filter_fixtures`
include protocol string of `SMART.CHILD`.
This is in preparation for tests based on supporting features amongst
other tweaks:
- Consolidates the filtering logic that was split across `filter_model`
and `filter_fixture`
- Allows filtering `dev` fixture by `component`
- Consolidates fixtures missing method warnings into one warning
- Does not raise exceptions from `FakeSmartTransport` for missing
methods (required for KS240)
Previously, only v1 of on_off_gradually is supported, and the newer versions are not backwards compatible.
This PR adds support for the newer versions of the component, and implements `number` type for `Feature` to expose the transition time selection.
This also adds a new `supported_version` property to the main module API.
Adds initial support for H100 and its alarmmodule.
Also implements the following modules for T315:
* reportmodule (reporting interval)
* battery
* humidity
* temperature
* Initialize children's modules (and features) using the child component negotiation results
* Set device_type based on the device response
* Print out child features in cli 'state'
* Add --child option to cli 'command' to allow targeting child devices
* Guard "generic" features like rssi, ssid, etc. only to devices which have this information
Note, we do not currently perform queries on child modules so some data may not be available. At the moment, a stop-gap solution to use parent's data is used but this is not always correct; even if the device shares the same clock and cloud connectivity, it may have its own firmware updates.
If a handshake session becomes invalid the device returns 403 on send and an `AuthenticationError` is raised which prevents a retry, however a retry would be successful. In HA this causes devices to go into reauth flow which is not necessary.
With the move towards autodetecting available features, there is no reason to keep SmartPlug around.
kasa.smart.SmartPlug is removed in favor of kasa.smart.SmartDevice which offers the same functionality.
Information about auto_off can be accessed using Features of the AutoOffModule on supported devices.
Co-authored-by: Steven B. <51370195+sdb9696@users.noreply.github.com>
Adds auto-off implementation. The feature stays enabled after the timer runs out, and it will start the countdown if the device is turned on again without explicitly disabling it.
New features:
* Switch to select if enabled: `Auto off enabled (auto_off_enabled): False`
* Setting to change the delay: `Auto off minutes (auto_off_minutes): 222`
* If timer is active, datetime object when the device gets turned off: `Auto off at (auto_off_at): None`
The initial steps to modularize the smartdevice. Modules are initialized based on the component negotiation, and each module can indicate which features it supports and which queries should be run during the update cycle.
This adds a generic interface for all device classes to introspect available device features,
that is necessary to make it easier to support a wide variety of supported devices with different set of features.
This will allow constructing generic interfaces (e.g., in homeassistant) that fetch and change these features without hard-coding the API calls.
`Device.features()` now returns a mapping of `<identifier, Feature>` where the `Feature` contains all necessary information (like the name, the icon, a way to get and change the setting) to present and change the defined feature through its interface.
* Fix for P100 on fw 1.1.3 login_version none
* Fix coverage
* Add delay before trying default login
* Move devtools and fixture out
* Change logging string
Co-authored-by: Teemu R. <tpr@iki.fi>
* Fix test
---------
Co-authored-by: Teemu R. <tpr@iki.fi>
* Fix discovery cli to print devices not printed during discovery
* Fix tests
* Fix print exceptions not being propagated
* Fix tests
* Reduce test discover_send time
* Simplify wait logic
* Add tests
* Remove sleep loop and make auth failed a list
* Separate fake protocols for iot and smart
* Move control_child impl into its own method
* Organize schemas into correct places
* Add test_childdevice
* Add missing return for _handle_control_child
* Add ChildDevice and ChildProtocolWrapper
* Initialize & update children
* Fix circular imports
* Add dummy_protocol fixture and tests for unwrapping responseData
* Use dummy_protocol for existing smartprotocol tests
* Move _ChildProtocolWrapper to smartprotocol.py
* Use dummy_protocol for test multiple requests
* Use device_id instead of position for selecting the child
* Fix wrapping for regular requests
* Remove unused imports
* tweak
* rename child_device to childdevice
* Fix import
