Teemu Rytilahti
eb0cc7ca37
Document hashing of credentials
2025-01-04 00:35:30 +01:00
Steven B.
0a95a41ab6
Update SslAesTransport for older firmware versions ( #1362 )
...
Older firmware versions do not encrypt the payload.
Tested to work with C110 hw 2.0 fw 1.3.7 Build 230823 Rel.57279n(5553)
---------
Co-authored-by: Teemu R. <tpr@iki.fi>
2025-01-03 21:00:57 +01:00
Teemu R.
883d52209e
Fix incorrect obd src echo ( #1412 )
2025-01-03 18:07:46 +00:00
Steven B.
361697a239
Change smartcam detection features to category config ( #1402 )
2025-01-03 07:08:23 +00:00
Steven B.
5d49623d5d
Add C210 2.0 1.3.11 fixture ( #1406 )
2025-01-03 06:55:55 +00:00
ZeliardM
d0aba68e7a
Add HS210(US) 3.0 1.0.10 IOT Fixture ( #1405 )
2024-12-24 15:56:14 +00:00
Steven B.
63f4f82791
Prepare 0.9.0 ( #1401 )
...
## [0.9.0](https://github.com/python-kasa/python-kasa/tree/0.9.0 ) (2024-12-21)
[Full Changelog](https://github.com/python-kasa/python-kasa/compare/0.8.1...0.9.0 )
**Release highlights:**
- Improvements to Tapo camera support:
- C100, C225, C325WB, C520WS and TC70 now supported.
- Support for motion, person, tamper, and baby cry detection.
- Initial support for Tapo robovacs.
- API extended with `FeatureAttributes` for consumers to test for [supported features](https://python-kasa.readthedocs.io/en/stable/topics.html#modules-and-features ).
- Experimental support for Kasa cameras[^1]
[^1]: Currently limited to devices not yet provisioned via the Tapo app - Many thanks to @puxtril!
**Breaking changes:**
- Use DeviceInfo consistently across devices [\#1338](https://github.com/python-kasa/python-kasa/pull/1338 ) (@sdb9696)
**Implemented enhancements:**
- Add rssi and signal\_level to smartcam [\#1392](https://github.com/python-kasa/python-kasa/pull/1392 ) (@sdb9696)
- Add smartcam detection modules [\#1389](https://github.com/python-kasa/python-kasa/pull/1389 ) (@sdb9696)
- Add bare-bones matter modules to smart and smartcam devices [\#1371](https://github.com/python-kasa/python-kasa/pull/1371 ) (@sdb9696)
- Add bare bones homekit modules smart and smartcam devices [\#1370](https://github.com/python-kasa/python-kasa/pull/1370 ) (@sdb9696)
- Return raw discovery result in cli discover raw [\#1342](https://github.com/python-kasa/python-kasa/pull/1342 ) (@sdb9696)
- cli: print model, https, and lv for discover list [\#1339](https://github.com/python-kasa/python-kasa/pull/1339 ) (@rytilahti)
- Improve overheat reporting [\#1335](https://github.com/python-kasa/python-kasa/pull/1335 ) (@rytilahti)
- Provide alternative camera urls [\#1316](https://github.com/python-kasa/python-kasa/pull/1316 ) (@sdb9696)
- Add LinkieTransportV2 and basic IOT.IPCAMERA support [\#1270](https://github.com/python-kasa/python-kasa/pull/1270 ) (@Puxtril)
- Add ssltransport for robovacs [\#943](https://github.com/python-kasa/python-kasa/pull/943 ) (@rytilahti)
**Fixed bugs:**
- Tapo H200 Hub does not work with python-kasa [\#1149](https://github.com/python-kasa/python-kasa/issues/1149 )
- Treat smartcam 500 errors after handshake as retryable [\#1395](https://github.com/python-kasa/python-kasa/pull/1395 ) (@sdb9696)
- Fix lens mask required component and state [\#1386](https://github.com/python-kasa/python-kasa/pull/1386 ) (@sdb9696)
- Add LensMask module to smartcam [\#1385](https://github.com/python-kasa/python-kasa/pull/1385 ) (@sdb9696)
- Do not error when accessing smart device\_type before update [\#1319](https://github.com/python-kasa/python-kasa/pull/1319 ) (@sdb9696)
- Fallback to other module data on get\_energy\_usage errors [\#1245](https://github.com/python-kasa/python-kasa/pull/1245 ) (@rytilahti)
**Added support for devices:**
- Add P210M\(US\) 1.0 1.0.3 fixture [\#1399](https://github.com/python-kasa/python-kasa/pull/1399 ) (@sdb9696)
- Add C225\(US\) 2.0 1.0.11 fixture [\#1398](https://github.com/python-kasa/python-kasa/pull/1398 ) (@sdb9696)
- Add P306\(US\) 1.0 1.1.2 fixture [\#1396](https://github.com/python-kasa/python-kasa/pull/1396 ) (@nakanaela)
- Add TC70 3.0 1.3.11 fixture [\#1390](https://github.com/python-kasa/python-kasa/pull/1390 ) (@sdb9696)
- Add C325WB\(EU\) 1.0 1.1.17 Fixture [\#1379](https://github.com/python-kasa/python-kasa/pull/1379 ) (@sdb9696)
- Add C100 4.0 1.3.14 Fixture [\#1378](https://github.com/python-kasa/python-kasa/pull/1378 ) (@sdb9696)
- Add KS200 \(US\) IOT Fixture and P115 \(US\) Smart Fixture [\#1355](https://github.com/python-kasa/python-kasa/pull/1355 ) (@ZeliardM)
- Add C520WS camera fixture [\#1352](https://github.com/python-kasa/python-kasa/pull/1352 ) (@Happy-Cadaver)
**Documentation updates:**
- Update docs for Tapo Lab Third-Party compatibility [\#1380](https://github.com/python-kasa/python-kasa/pull/1380 ) (@sdb9696)
- Add homebridge-kasa-python link to README [\#1367](https://github.com/python-kasa/python-kasa/pull/1367 ) (@rytilahti)
- Update docs for new FeatureAttribute behaviour [\#1365](https://github.com/python-kasa/python-kasa/pull/1365 ) (@sdb9696)
- Add link to related homeassistant-tapo-control [\#1333](https://github.com/python-kasa/python-kasa/pull/1333 ) (@rytilahti)
**Project maintenance:**
- Add P135 1.0 1.2.0 fixture [\#1397](https://github.com/python-kasa/python-kasa/pull/1397 ) (@sdb9696)
- Handle smartcam device blocked response [\#1393](https://github.com/python-kasa/python-kasa/pull/1393 ) (@sdb9696)
- Handle KeyboardInterrupts in the cli better [\#1391](https://github.com/python-kasa/python-kasa/pull/1391 ) (@sdb9696)
- Update C520WS fixture with new methods [\#1384](https://github.com/python-kasa/python-kasa/pull/1384 ) (@sdb9696)
- Miscellaneous minor fixes to dump\_devinfo [\#1382](https://github.com/python-kasa/python-kasa/pull/1382 ) (@sdb9696)
- Add timeout parameter to dump\_devinfo [\#1381](https://github.com/python-kasa/python-kasa/pull/1381 ) (@sdb9696)
- Simplify get\_protocol to prevent clashes with smartcam and robovac [\#1377](https://github.com/python-kasa/python-kasa/pull/1377 ) (@sdb9696)
- Add smartcam modules to package inits [\#1376](https://github.com/python-kasa/python-kasa/pull/1376 ) (@sdb9696)
- Enable saving of fixture files without git clone [\#1375](https://github.com/python-kasa/python-kasa/pull/1375 ) (@sdb9696)
- Force single for some smartcam requests [\#1374](https://github.com/python-kasa/python-kasa/pull/1374 ) (@sdb9696)
- Add new methods to dump\_devinfo [\#1373](https://github.com/python-kasa/python-kasa/pull/1373 ) (@sdb9696)
- Update cli, light modules, and docs to use FeatureAttributes [\#1364](https://github.com/python-kasa/python-kasa/pull/1364 ) (@sdb9696)
- Pass raw components to SmartChildDevice init [\#1363](https://github.com/python-kasa/python-kasa/pull/1363 ) (@sdb9696)
- Fix line endings in device\_fixtures.py [\#1361](https://github.com/python-kasa/python-kasa/pull/1361 ) (@sdb9696)
- Update dump\_devinfo for raw discovery json and common redactors [\#1358](https://github.com/python-kasa/python-kasa/pull/1358 ) (@sdb9696)
- Tweak RELEASING.md instructions for patch releases [\#1347](https://github.com/python-kasa/python-kasa/pull/1347 ) (@sdb9696)
- Scrub more vacuum keys [\#1328](https://github.com/python-kasa/python-kasa/pull/1328 ) (@rytilahti)
- Remove unnecessary check for python \<3.10 [\#1326](https://github.com/python-kasa/python-kasa/pull/1326 ) (@rytilahti)
- Add vacuum component queries to dump\_devinfo [\#1320](https://github.com/python-kasa/python-kasa/pull/1320 ) (@rytilahti)
- Handle missing mgt\_encryption\_schm in discovery [\#1318](https://github.com/python-kasa/python-kasa/pull/1318 ) (@sdb9696)
- Follow main package structure for tests [\#1317](https://github.com/python-kasa/python-kasa/pull/1317 ) (@rytilahti)
2024-12-21 16:47:46 +00:00
Bipolar Chemist
9b1be1c0b2
Add P306(US) 1.0 1.1.2 fixture ( #1396 )
2024-12-21 09:36:57 +00:00
Steven B.
d81cf1b3b6
Add P210M(US) 1.0 1.0.3 fixture ( #1399 )
2024-12-21 09:20:12 +00:00
Steven B.
cef0e571a0
Add C225(US) 2.0 1.0.11 fixture ( #1398 )
2024-12-21 09:17:50 +00:00
Steven B.
522c78350e
Add P135 1.0 1.2.0 fixture ( #1397 )
2024-12-21 09:17:00 +00:00
Steven B.
8418ba3eef
Treat smartcam 500 errors after handshake as retryable ( #1395 )
...
`smartcam` devices can respond with 500 if another session is created from the same host
2024-12-20 19:23:18 +00:00
Steven B.
93ca3ad2e1
Handle smartcam device blocked response ( #1393 )
...
Devices that have failed authentication multiple times due to bad credentials go into a blocked state for 30 mins.
Handle that as a different error type instead of treating it as a normal `AuthenticationError`.
2024-12-20 14:55:15 +00:00
Steven B.
296af3192e
Handle KeyboardInterrupts in the cli better ( #1391 )
...
Addresses an issue with how `asyncclick` deals with `KeyboardInterrupt`
errors. Instead of the `click.main` receiving `KeyboardInterrupt` it
receives `CancelledError` because it's a task running inside the loop.
Also ensures that discovery catches the `CancelledError` and closes the
http clients.
2024-12-20 14:21:38 +01:00
Teemu R.
fe88b52e19
Fallback to other module data on get_energy_usage errors ( #1245 )
...
- The `get_energy_usage` query can fail if the device time is not set because the response includes the device time.
- Make `get_energy_usage` an optional query response so the energy module can fall back to getting the power from `get_emeter_data` or `get_current_power` on error.
- Devices on `energy_monitoring` version 1 still fail as they have no additional queries to fall back to.
2024-12-20 08:53:07 +00:00
Steven B.
83eb73cc7f
Add rssi and signal_level to smartcam ( #1392 )
2024-12-20 06:16:18 +00:00
Steven B.
d890b0a3ac
Add smartcam detection modules ( #1389 )
...
- Motion detection
- Person detection
- Tamper detection
- Baby Cry Detection
2024-12-20 00:22:08 +01:00
Steven B.
b5f49a3c8a
Fix lens mask required component and state ( #1386 )
...
Fixes a few issues with the lens mask since migrating it into its own
module:
- The module didn't provide itself as the container and hence the
feature was accessing the same properties on the device.
- `enabled` getter on the module incorrect but not picked up due to the
previous issue.
- No `REQUIRED_COMPONENT` set to ensure the module only created if
available.
Also changes attribute names to `enabled` from `state` to avoid
confusion with device states.
2024-12-19 14:52:25 +01:00
Steven B.
b78e09caa0
Add TC70 3.0 1.3.11 fixture ( #1390 )
...
Many thanks to @allanbeth for the fixture!
2024-12-19 14:48:03 +01:00
Steven B.
47934dbf96
Add C325WB(EU) 1.0 1.1.17 Fixture ( #1379 )
2024-12-18 11:43:20 +00:00
Steven B.
ba273f308e
Add LensMask module to smartcam ( #1385 )
...
Ensures no error with devices that do not have the `lens_mask` component.
2024-12-17 20:15:42 +00:00
Teemu R.
37ef7b0463
cli: print model, https, and lv for discover list ( #1339 )
...
```
kasa --target 192.168.xx.xx discover list
HOST MODEL DEVICE FAMILY ENCRYPT HTTPS LV ALIAS
192.168.xxx.xxx KP115(EU) IOT.SMARTPLUGSWITCH XOR 0 - Fridge
192.168.xxx.xxx L900-5 SMART.TAPOBULB KLAP 0 2 L900
192.168.xxx.xxx P115 SMART.TAPOPLUG AES 0 2 Nightdesk
192.168.xxx.xxx TC65 SMART.IPCAMERA AES 1 2 Tapo_TC65_B593
```
Also handles `TimeoutError` and `Exception` during `update()`
---------
Co-authored-by: Steven B <51370195+sdb9696@users.noreply.github.com>
2024-12-17 21:09:17 +01:00
Steven B.
14d5629de1
Update C520WS fixture with new methods ( #1384 )
2024-12-17 10:59:57 +00:00
Steven B.
c6c4490a49
Add C100 4.0 1.3.14 Fixture ( #1378 )
2024-12-17 10:59:24 +00:00
Steven B.
fe072657b4
Simplify get_protocol to prevent clashes with smartcam and robovac ( #1377 )
2024-12-17 07:39:17 +00:00
Steven B.
5918e4daa7
Enable saving of fixture files without git clone ( #1375 )
...
Allows `dump_devinfo` to be run without fixture subfolders present from cloned repository
2024-12-16 13:42:42 +00:00
Steven B.
d03a387a74
Add new methods to dump_devinfo ( #1373 )
...
Adds `getMatterSetupInfo`, `getConnectStatus` and `scanApList`
2024-12-16 13:06:26 +00:00
Steven B.
e206d9b4df
Miscellaneous minor fixes to dump_devinfo ( #1382 )
...
Fixes:
- Decrypted discovery data saved under `discovery_result` instead of `result`
- `smart` child data not redacted
- `smartcam` child component list `device_id` not `SCRUBBED`
2024-12-16 13:00:28 +00:00
Steven B.
62345be916
Add timeout parameter to dump_devinfo ( #1381 )
2024-12-16 13:48:27 +01:00
Steven B.
e9109447a7
Add smartcam modules to package inits ( #1376 )
2024-12-16 13:20:26 +01:00
Steven B.
031ebcd97f
Update docs for Tapo Lab Third-Party compatibility ( #1380 )
2024-12-16 13:19:25 +01:00
Steven B.
f8503e4df6
Force single for some smartcam requests ( #1374 )
...
`onboarding` requests do not return the method key and need to be sent as single requests.
2024-12-15 16:03:12 +00:00
Steven B.
c439530f93
Add bare bones homekit modules smart and smartcam devices ( #1370 )
2024-12-14 13:34:58 +00:00
Steven B.
59e5073509
Update docs for new FeatureAttribute behaviour ( #1365 )
...
Co-authored-by: Teemu R. <tpr@iki.fi>
2024-12-13 22:23:58 +01:00
Steven B.
2ca6d3ebe9
Add bare-bones matter modules to smart and smartcam devices ( #1371 )
2024-12-13 19:45:38 +00:00
Steven B.
223f3318ea
Use DeviceInfo consistently across devices ( #1338 )
...
- Make model exclude region for `iot` devices. This is consistent with `smart` and `smartcam` devices.
- Make region it's own attribute on `Device`.
- Ensure that devices consistently use `_get_device_info` static methods for all information relating to device models.
- Fix issue with firmware and hardware being the wrong way round for `smartcam` devices.
2024-12-13 12:37:13 +00:00
Teemu R.
5f84c69774
Add homebridge-kasa-python link to README ( #1367 )
2024-12-12 09:51:45 +00:00
Steven B.
7709bb967f
Update cli, light modules, and docs to use FeatureAttributes ( #1364 )
2024-12-11 15:53:35 +00:00
Steven B.
f8a46f74cd
Pass raw components to SmartChildDevice init ( #1363 )
...
Clean up and consolidate the processing of raw component query responses and simplify the code paths for creating smartcam child devices when supported.
2024-12-11 14:38:38 +00:00
Steven B.
8cb5c2e180
Update dump_devinfo for raw discovery json and common redactors ( #1358 )
...
This PR does a few related things to dump_devinfo:
- Store the raw discovery result in the fixture.
- Consolidate redaction logic so it's not duplicated in dump_devinfo.
- Update existing fixtures to:
- Store raw discovery result under `result`
- Use `SCRUBBED_CHILD_DEVICE_ID` everywhere
- Have correct values as per the consolidated redactors.
2024-12-11 14:18:44 +01:00
Teemu R.
032cd5d2cc
Improve overheat reporting ( #1335 )
...
Different devices and different firmwares report overheated status in
different ways.
Some devices indicate support for `overheat_protect` component, but
there are devices that report `overheat_status` even when it is not
listed.
Some other devices use `overheated` boolean that was already previously
supported, but this PR adds support for much more devices that use
`overheat_status` for reporting.
The "overheated" feature is moved into its own module, and uses either
of the ways to report this information.
This will also rename `REQUIRED_KEY_ON_PARENT` to `SYSINFO_LOOKUP_KEYS`
and change its logic to check if any of the keys in the list are found
in the sysinfo.
```
tpr@lumipyry ~/c/p/tests (fix/overheated)> ag 'overheat_protect' -c|wc -l
15
tpr@lumipyry ~/c/p/tests (fix/overheated)> ag 'overheated' -c|wc -l
38
tpr@lumipyry ~/c/p/tests (fix/overheated)> ag 'overheat_status' -c|wc -l
20
```
---------
Co-authored-by: Steven B. <51370195+sdb9696@users.noreply.github.com>
2024-12-11 01:01:36 +01:00
Steven B.
bf8f0adabe
Return raw discovery result in cli discover raw ( #1342 )
...
Add `on_discovered_raw` callback to Discover and adds a cli command `discover raw` which returns the raw json before serializing to a `DiscoveryResult` and attempting to create a device class.
2024-12-10 22:42:14 +00:00
Steven B.
464683e09b
Tweak RELEASING.md instructions for patch releases ( #1347 )
2024-12-10 22:23:04 +01:00
Steven B.
ed0481918c
Fix line endings in device_fixtures.py ( #1361 )
2024-12-10 08:37:57 +00:00
ZeliardM
2f87ccd201
Add KS200 (US) IOT Fixture and P115 (US) Smart Fixture ( #1355 )
2024-12-10 06:14:17 +00:00
Happy-Cadaver
fd74b07e2c
Add C520WS camera fixture ( #1352 )
...
Adding the C520WS fixture file
---------
Co-authored-by: Steven B <51370195+sdb9696@users.noreply.github.com>
2024-12-10 00:24:27 +01:00
Puxtril
cb89342be1
Add LinkieTransportV2 and basic IOT.IPCAMERA support ( #1270 )
...
Add LinkieTransportV2 transport used by kasa cameras and a basic
implementation for IOT.IPCAMERA (kasacam) devices.
---------
Co-authored-by: Zach Price <pricezt@ornl.gov>
Co-authored-by: Steven B <51370195+sdb9696@users.noreply.github.com>
Co-authored-by: Teemu Rytilahti <tpr@iki.fi>
2024-12-07 00:06:58 +01:00
Steven B.
6d9b4421fe
Merge patch into master ( #1346 )
2024-12-06 12:01:24 +00:00
Steven B
7b9fe7f693
Merge patch into local master
2024-12-06 11:51:26 +00:00
Steven B.
611cd66266
0.8.1 ( #1345 )
...
## [0.8.1](https://github.com/python-kasa/python-kasa/tree/0.8.1 ) (2024-12-06)
This patch release fixes some issues with newly supported smartcam devices.
[Full Changelog](https://github.com/python-kasa/python-kasa/compare/0.8.0...0.8.1 )
**Fixed bugs:**
- Fix update errors on hubs with unsupported children [\#1344](https://github.com/python-kasa/python-kasa/pull/1344 ) (@sdb9696)
- Fix smartcam missing device id [\#1343](https://github.com/python-kasa/python-kasa/pull/1343 ) (@sdb9696)
2024-12-06 11:36:51 +00:00
