Prepare 0.10.0 (#1473)

## [0.10.0](https://github.com/python-kasa/python-kasa/tree/0.10.0) (2025-01-26)

[Full Changelog](https://github.com/python-kasa/python-kasa/compare/0.9.1...0.10.0)

**Release summary:**

This release brings support for many new devices, including completely new device types:

- Support for Tapo robot vacuums. Special thanks to @steveredden, @MAXIGAMESSUPPER, and veep60 for helping to get this implemented!
- Support for hub attached cameras and doorbells (H200)
- Improved support for hubs (including pairing & better chime controls)
- Support for many new camera and doorbell device models, including C220, C720, D100C, D130, and D230

Many thanks to testers and new contributors - @steveredden, @DawidPietrykowski, @Obbay2, @andrewome, @ryenitcher and @etmmvdp!

**Breaking changes:**

- `uses_http` is now a readonly property of device config. Consumers that relied on `uses_http` to be persisted with `DeviceConfig.to_dict()` will need to store the value separately.
- `is_color`, `is_dimmable`, `is_variable_color_temp`, `valid_temperate_range`, and `has_effects` attributes from the `Light` module are deprecated, consumers should use `has_feature("hsv")`, `has_feature("brightness")`, `has_feature("color_temp")`, `get_feature("color_temp").range`, and `Module.LightEffect in dev.modules` respectively. Calling the deprecated attributes will emit a `DeprecationWarning` and type checkers will fail them.
-  `alarm_volume` on the `smart.Alarm` module is changed from `str` to `int`

**Breaking changes:**

- Make uses\_http a readonly property of device config [\#1449](https://github.com/python-kasa/python-kasa/pull/1449) (@sdb9696)
- Allow passing alarm parameter overrides [\#1340](https://github.com/python-kasa/python-kasa/pull/1340) (@rytilahti)
- Deprecate legacy light module is\_capability checks [\#1297](https://github.com/python-kasa/python-kasa/pull/1297) (@sdb9696)

**Implemented enhancements:**

- Expose more battery sensors for D230 [\#1451](https://github.com/python-kasa/python-kasa/issues/1451)
- dumping HTTP POST Body for Tapo Vacuum \(RV30 Plus\) [\#937](https://github.com/python-kasa/python-kasa/issues/937)
- Add common alarm interface [\#1479](https://github.com/python-kasa/python-kasa/pull/1479) (@sdb9696)
- Add common childsetup interface [\#1470](https://github.com/python-kasa/python-kasa/pull/1470) (@sdb9696)
- Add childsetup module to smartcam hubs [\#1469](https://github.com/python-kasa/python-kasa/pull/1469) (@sdb9696)
- Add smartcam pet detection toggle module [\#1465](https://github.com/python-kasa/python-kasa/pull/1465) (@DawidPietrykowski)
- Only log one warning per unknown clean error code and status [\#1462](https://github.com/python-kasa/python-kasa/pull/1462) (@rytilahti)
- Add childlock module for vacuums [\#1461](https://github.com/python-kasa/python-kasa/pull/1461) (@rytilahti)
- Add ultra mode \(fanspeed = 5\) for vacuums [\#1459](https://github.com/python-kasa/python-kasa/pull/1459) (@rytilahti)
- Add setting to change carpet clean mode [\#1458](https://github.com/python-kasa/python-kasa/pull/1458) (@rytilahti)
- Add setting to change clean count [\#1457](https://github.com/python-kasa/python-kasa/pull/1457) (@rytilahti)
- Add mop module [\#1456](https://github.com/python-kasa/python-kasa/pull/1456) (@rytilahti)
- Enable dynamic hub child creation and deletion on update [\#1454](https://github.com/python-kasa/python-kasa/pull/1454) (@sdb9696)
- Expose current cleaning information [\#1453](https://github.com/python-kasa/python-kasa/pull/1453) (@rytilahti)
- Add battery module to smartcam devices [\#1452](https://github.com/python-kasa/python-kasa/pull/1452) (@sdb9696)
- Allow update of camera modules after setting values [\#1450](https://github.com/python-kasa/python-kasa/pull/1450) (@sdb9696)
- Update hub children on first update and delay subsequent updates [\#1438](https://github.com/python-kasa/python-kasa/pull/1438) (@sdb9696)
- Add support for doorbells and chimes [\#1435](https://github.com/python-kasa/python-kasa/pull/1435) (@steveredden)
- Implement vacuum dustbin module \(dust\_bucket\) [\#1423](https://github.com/python-kasa/python-kasa/pull/1423) (@rytilahti)
- Allow https for klaptransport [\#1415](https://github.com/python-kasa/python-kasa/pull/1415) (@rytilahti)
- Add smartcam child device support for smartcam hubs [\#1413](https://github.com/python-kasa/python-kasa/pull/1413) (@sdb9696)
- Add powerprotection module [\#1337](https://github.com/python-kasa/python-kasa/pull/1337) (@rytilahti)
- Add vacuum speaker controls [\#1332](https://github.com/python-kasa/python-kasa/pull/1332) (@rytilahti)
- Add consumables module for vacuums [\#1327](https://github.com/python-kasa/python-kasa/pull/1327) (@rytilahti)
- Add ADC Value to PIR Enabled Switches [\#1263](https://github.com/python-kasa/python-kasa/pull/1263) (@ryenitcher)
- Add support for cleaning records [\#945](https://github.com/python-kasa/python-kasa/pull/945) (@rytilahti)
- Initial support for vacuums \(clean module\) [\#944](https://github.com/python-kasa/python-kasa/pull/944) (@rytilahti)
- Add support for pairing devices with hubs [\#859](https://github.com/python-kasa/python-kasa/pull/859) (@rytilahti)

**Fixed bugs:**

- TP-Link HS300 Wi-Fi Power-Strip - "Parent On/Off" not functioning. [\#637](https://github.com/python-kasa/python-kasa/issues/637)
- Convert carpet\_clean\_mode to carpet\_boost switch [\#1486](https://github.com/python-kasa/python-kasa/pull/1486) (@rytilahti)
- Change category for empty dustbin feature from Primary to Config [\#1485](https://github.com/python-kasa/python-kasa/pull/1485) (@rytilahti)
- Report 0 for instead of None for zero current and voltage [\#1483](https://github.com/python-kasa/python-kasa/pull/1483) (@ryenitcher)
- Disable iot camera creation until more complete [\#1480](https://github.com/python-kasa/python-kasa/pull/1480) (@sdb9696)
- ssltransport: use debug logger for sending requests [\#1443](https://github.com/python-kasa/python-kasa/pull/1443) (@rytilahti)
- Fix discover cli command with host [\#1437](https://github.com/python-kasa/python-kasa/pull/1437) (@sdb9696)
- Fallback to is\_low for batterysensor's battery\_low [\#1420](https://github.com/python-kasa/python-kasa/pull/1420) (@rytilahti)
- Fix iot strip turn on and off from parent [\#639](https://github.com/python-kasa/python-kasa/pull/639) (@Obbay2)

**Added support for devices:**

- Add D130\(US\) 1.0 1.1.9 fixture [\#1476](https://github.com/python-kasa/python-kasa/pull/1476) (@sdb9696)
- Add D100C\(US\) 1.0 1.1.3 fixture [\#1475](https://github.com/python-kasa/python-kasa/pull/1475) (@sdb9696)
- Add C220\(EU\) 1.0 1.2.2 camera fixture [\#1466](https://github.com/python-kasa/python-kasa/pull/1466) (@DawidPietrykowski)
- Add D230\(EU\) 1.20 1.1.19 fixture [\#1448](https://github.com/python-kasa/python-kasa/pull/1448) (@sdb9696)
- Add fixture for C720 camera [\#1433](https://github.com/python-kasa/python-kasa/pull/1433) (@steveredden)

**Project maintenance:**

- Update ruff to 0.9 [\#1482](https://github.com/python-kasa/python-kasa/pull/1482) (@sdb9696)
- Cancel in progress CI workflows after new pushes [\#1481](https://github.com/python-kasa/python-kasa/pull/1481) (@sdb9696)
- Update test framework to support smartcam device discovery. [\#1477](https://github.com/python-kasa/python-kasa/pull/1477) (@sdb9696)
- Add error code 7 for clean module [\#1474](https://github.com/python-kasa/python-kasa/pull/1474) (@rytilahti)
- Enable CI workflow on PRs to feat/ fix/ and janitor/ [\#1471](https://github.com/python-kasa/python-kasa/pull/1471) (@sdb9696)
- Add commit-hook to prettify JSON files [\#1455](https://github.com/python-kasa/python-kasa/pull/1455) (@rytilahti)
- Add required sphinx.configuration [\#1446](https://github.com/python-kasa/python-kasa/pull/1446) (@rytilahti)
- Add more redactors for smartcams [\#1439](https://github.com/python-kasa/python-kasa/pull/1439) (@sdb9696)
- Add KS230\(US\) 2.0 1.0.11 IOT Fixture [\#1430](https://github.com/python-kasa/python-kasa/pull/1430) (@ZeliardM)
- Add tests for dump\_devinfo parent/child smartcam fixture generation [\#1428](https://github.com/python-kasa/python-kasa/pull/1428) (@sdb9696)
- Raise errors on single smartcam child requests [\#1427](https://github.com/python-kasa/python-kasa/pull/1427) (@sdb9696)

RELEASING.md

@@ -44,9 +44,10 @@ uv lock --upgrade
 uv sync --all-extras
 ```
 
-### Run pre-commit and tests
+### Update and run pre-commit and tests
 
 ```bash
+pre-commit autoupdate
 uv run pre-commit run --all-files
 uv run pytest -n auto
 ```
@@ -124,6 +125,12 @@ git push upstream release/$NEW_RELEASE -u
 gh pr create --title "Prepare $NEW_RELEASE" --body "$RELEASE_NOTES" --label release-prep --base master
 ```
 
+To update the PR after refreshing the changelog:
+
+```
+gh pr edit --body "$RELEASE_NOTES"
+```
+
 #### Merge the PR once the CI passes
 
 Create a squash commit and add the markdown from the PR description to the commit description.