Mirrored_Repos/python-kasa
1
0
Fork 0
mirror of https://github.com/python-kasa/python-kasa.git synced 2024-12-22 03:03:35 +00:00
Code Issues Actions 3 Packages Projects Releases Wiki Activity
master
python-kasa/SUPPORTED.md

318 lines
9.0 KiB
Markdown
Raw Permalink Normal View History

Add WallSwitch device type and autogenerate supported devices docs (#758)
2024-03-01 18:32:45 +00:00
# Supported devices
The following devices have been tested and confirmed as working. If your device is unlisted but working, please open a pull request to update the list and add a fixture file (use `python -m devtools.dump_devinfo` to generate one).
Add S200B(EU) fw 1.11.0 fixture (#1205) Adds a note about button presses not being supported.
2024-10-29 08:58:47 +00:00
> [!NOTE]
> The hub attached Tapo buttons S200B and S200D do not currently support alerting when the button is pressed.
Update docs for Tapo Lab Third-Party compatibility (#1380)
2024-12-16 12:19:25 +00:00
> [!NOTE]
> Some firmware versions of Tapo Cameras will not authenticate unless you enable "Tapo Lab" > "Third-Party Compatibility" in the native Tapo app.
> Alternatively, you can factory reset and then prevent the device from accessing the internet.
Add S200B(EU) fw 1.11.0 fixture (#1205) Adds a note about button presses not being supported.
2024-10-29 08:58:47 +00:00
Add WallSwitch device type and autogenerate supported devices docs (#758)
2024-03-01 18:32:45 +00:00
<!--Do not edit text inside the SUPPORTED section below -->
<!--SUPPORTED_START-->
## Kasa devices
Use markdown footnotes in supported.md (#1310) Brings our markdown inline with the [HA markdown](https://github.com/home-assistant/home-assistant.io/pull/33342#discussion_r1653484233)
2024-11-25 17:02:12 +00:00
Some newer Kasa devices require authentication. These are marked with [^1] in the list below.<br>Hub-Connected Devices may work across TAPO/KASA branded hubs even if they don't work across the native apps.
Add WallSwitch device type and autogenerate supported devices docs (#758)
2024-03-01 18:32:45 +00:00
### Plugs
- **EP10**
- Hardware: 1.0 (US) / Firmware: 1.0.2
- **EP25**
Use markdown footnotes in supported.md (#1310) Brings our markdown inline with the [HA markdown](https://github.com/home-assistant/home-assistant.io/pull/33342#discussion_r1653484233)
2024-11-25 17:02:12 +00:00
- Hardware: 2.6 (US) / Firmware: 1.0.1[^1]
- Hardware: 2.6 (US) / Firmware: 1.0.2[^1]
Add WallSwitch device type and autogenerate supported devices docs (#758)
2024-03-01 18:32:45 +00:00
- **HS100**
- Hardware: 1.0 (UK) / Firmware: 1.2.6
Use markdown footnotes in supported.md (#1310) Brings our markdown inline with the [HA markdown](https://github.com/home-assistant/home-assistant.io/pull/33342#discussion_r1653484233)
2024-11-25 17:02:12 +00:00
- Hardware: 4.1 (UK) / Firmware: 1.1.0[^1]
Add WallSwitch device type and autogenerate supported devices docs (#758)
2024-03-01 18:32:45 +00:00
- Hardware: 1.0 (US) / Firmware: 1.2.5
- Hardware: 2.0 (US) / Firmware: 1.5.6
- **HS103**
- Hardware: 1.0 (US) / Firmware: 1.5.7
- Hardware: 2.1 (US) / Firmware: 1.1.2
- Hardware: 2.1 (US) / Firmware: 1.1.4
- **HS105**
- Hardware: 1.0 (US) / Firmware: 1.5.6
- **HS110**
- Hardware: 1.0 (EU) / Firmware: 1.2.5
- Hardware: 4.0 (EU) / Firmware: 1.0.4
Add some device fixtures (#948) Adds some device fixtures by courtesy of @jimboca, thanks! This is a slightly patched and rebased version of #441. --------- Co-authored-by: JimBo <jimboca3@gmail.com> Co-authored-by: sdb9696 <steven.beth@gmail.com>
2024-06-04 17:24:53 +00:00
- Hardware: 1.0 (US) / Firmware: 1.2.6
Add WallSwitch device type and autogenerate supported devices docs (#758)
2024-03-01 18:32:45 +00:00
- **KP100**
- Hardware: 3.0 (US) / Firmware: 1.0.1
- **KP105**
- Hardware: 1.0 (UK) / Firmware: 1.0.5
- Hardware: 1.0 (UK) / Firmware: 1.0.7
- **KP115**
- Hardware: 1.0 (EU) / Firmware: 1.0.16
- Hardware: 1.0 (US) / Firmware: 1.0.17
- Hardware: 1.0 (US) / Firmware: 1.0.21
- **KP125**
- Hardware: 1.0 (US) / Firmware: 1.0.6
- **KP125M**
Use markdown footnotes in supported.md (#1310) Brings our markdown inline with the [HA markdown](https://github.com/home-assistant/home-assistant.io/pull/33342#discussion_r1653484233)
2024-11-25 17:02:12 +00:00
- Hardware: 1.0 (US) / Firmware: 1.1.3[^1]
- Hardware: 1.0 (US) / Firmware: 1.2.3[^1]
Add WallSwitch device type and autogenerate supported devices docs (#758)
2024-03-01 18:32:45 +00:00
- **KP401**
- Hardware: 1.0 (US) / Firmware: 1.0.0
### Power Strips
- **EP40**
- Hardware: 1.0 (US) / Firmware: 1.0.2
Add EP40M Fixture (#1238) Add fixture for [EP40M](https://www.kasasmart.com/us/products/smart-plugs/smart-wifi-outdoor-plug-ep40m), Smart Wi-Fi Outdoor Plug (Matter).
2024-11-09 00:47:56 +00:00
- **EP40M**
Use markdown footnotes in supported.md (#1310) Brings our markdown inline with the [HA markdown](https://github.com/home-assistant/home-assistant.io/pull/33342#discussion_r1653484233)
2024-11-25 17:02:12 +00:00
- Hardware: 1.0 (US) / Firmware: 1.1.0[^1]
Add WallSwitch device type and autogenerate supported devices docs (#758)
2024-03-01 18:32:45 +00:00
- **HS107**
- Hardware: 1.0 (US) / Firmware: 1.0.8
- **HS300**
- Hardware: 1.0 (US) / Firmware: 1.0.10
Add some device fixtures (#948) Adds some device fixtures by courtesy of @jimboca, thanks! This is a slightly patched and rebased version of #441. --------- Co-authored-by: JimBo <jimboca3@gmail.com> Co-authored-by: sdb9696 <steven.beth@gmail.com>
2024-06-04 17:24:53 +00:00
- Hardware: 1.0 (US) / Firmware: 1.0.21
Add WallSwitch device type and autogenerate supported devices docs (#758)
2024-03-01 18:32:45 +00:00
- Hardware: 2.0 (US) / Firmware: 1.0.12
- Hardware: 2.0 (US) / Firmware: 1.0.3
- **KP200**
- Hardware: 3.0 (US) / Firmware: 1.0.3
- **KP303**
- Hardware: 1.0 (UK) / Firmware: 1.0.3
- Hardware: 2.0 (US) / Firmware: 1.0.3
Add Additional Firmware Test Fixures (#1234) Fixtures for the following new firmware versions on existing devices: - ES20M(US)_1.0_1.0.11 - HS200(US)_3.0_1.1.5 - HS200(US)_5.0_1.0.11 - HS210(US)_2.0_1.1.5 - KP303(US)_2.0_1.0.9 - KS200M(US)_1.0_1.0.10 - KP125M(US)_1.0_1.2.3 - KS240(US)_1.0_1.0.7
2024-11-09 07:16:41 +00:00
- Hardware: 2.0 (US) / Firmware: 1.0.9
Add WallSwitch device type and autogenerate supported devices docs (#758)
2024-03-01 18:32:45 +00:00
- **KP400**
- Hardware: 1.0 (US) / Firmware: 1.0.10
- Hardware: 2.0 (US) / Firmware: 1.0.6
Add KP400 v1.0.3 fixture (#1037)
2024-07-04 11:21:03 +00:00
- Hardware: 3.0 (US) / Firmware: 1.0.3
Add KP400(US) v1.0.4 fixture (#1051)
2024-07-07 12:23:24 +00:00
- Hardware: 3.0 (US) / Firmware: 1.0.4
Add WallSwitch device type and autogenerate supported devices docs (#758)
2024-03-01 18:32:45 +00:00
### Wall Switches
- **ES20M**
Add Additional Firmware Test Fixures (#1234) Fixtures for the following new firmware versions on existing devices: - ES20M(US)_1.0_1.0.11 - HS200(US)_3.0_1.1.5 - HS200(US)_5.0_1.0.11 - HS210(US)_2.0_1.1.5 - KP303(US)_2.0_1.0.9 - KS200M(US)_1.0_1.0.10 - KP125M(US)_1.0_1.2.3 - KS240(US)_1.0_1.0.7
2024-11-09 07:16:41 +00:00
- Hardware: 1.0 (US) / Firmware: 1.0.11
Add WallSwitch device type and autogenerate supported devices docs (#758)
2024-03-01 18:32:45 +00:00
- Hardware: 1.0 (US) / Firmware: 1.0.8
- **HS200**
- Hardware: 2.0 (US) / Firmware: 1.5.7
Add Additional Firmware Test Fixures (#1234) Fixtures for the following new firmware versions on existing devices: - ES20M(US)_1.0_1.0.11 - HS200(US)_3.0_1.1.5 - HS200(US)_5.0_1.0.11 - HS210(US)_2.0_1.1.5 - KP303(US)_2.0_1.0.9 - KS200M(US)_1.0_1.0.10 - KP125M(US)_1.0_1.2.3 - KS240(US)_1.0_1.0.7
2024-11-09 07:16:41 +00:00
- Hardware: 3.0 (US) / Firmware: 1.1.5
- Hardware: 5.0 (US) / Firmware: 1.0.11
Add WallSwitch device type and autogenerate supported devices docs (#758)
2024-03-01 18:32:45 +00:00
- Hardware: 5.0 (US) / Firmware: 1.0.2
Use markdown footnotes in supported.md (#1310) Brings our markdown inline with the [HA markdown](https://github.com/home-assistant/home-assistant.io/pull/33342#discussion_r1653484233)
2024-11-25 17:02:12 +00:00
- Hardware: 5.26 (US) / Firmware: 1.0.3[^1]
Add WallSwitch device type and autogenerate supported devices docs (#758)
2024-03-01 18:32:45 +00:00
- **HS210**
- Hardware: 1.0 (US) / Firmware: 1.5.8
Add Additional Firmware Test Fixures (#1234) Fixtures for the following new firmware versions on existing devices: - ES20M(US)_1.0_1.0.11 - HS200(US)_3.0_1.1.5 - HS200(US)_5.0_1.0.11 - HS210(US)_2.0_1.1.5 - KP303(US)_2.0_1.0.9 - KS200M(US)_1.0_1.0.10 - KP125M(US)_1.0_1.2.3 - KS240(US)_1.0_1.0.7
2024-11-09 07:16:41 +00:00
- Hardware: 2.0 (US) / Firmware: 1.1.5
Add WallSwitch device type and autogenerate supported devices docs (#758)
2024-03-01 18:32:45 +00:00
- **HS220**
- Hardware: 1.0 (US) / Firmware: 1.5.7
- Hardware: 2.0 (US) / Firmware: 1.0.3
Use markdown footnotes in supported.md (#1310) Brings our markdown inline with the [HA markdown](https://github.com/home-assistant/home-assistant.io/pull/33342#discussion_r1653484233)
2024-11-25 17:02:12 +00:00
- Hardware: 3.26 (US) / Firmware: 1.0.1[^1]
Add WallSwitch device type and autogenerate supported devices docs (#758)
2024-03-01 18:32:45 +00:00
- **KP405**
- Hardware: 1.0 (US) / Firmware: 1.0.5
Add fixture file for KP405 fw 1.0.6 (#1063)
2024-07-14 14:31:31 +00:00
- Hardware: 1.0 (US) / Firmware: 1.0.6
Add KS200 (US) IOT Fixture and P115 (US) Smart Fixture (#1355)
2024-12-10 06:14:17 +00:00
- **KS200**
- Hardware: 1.0 (US) / Firmware: 1.0.8
Add WallSwitch device type and autogenerate supported devices docs (#758)
2024-03-01 18:32:45 +00:00
- **KS200M**
Add Additional Firmware Test Fixures (#1234) Fixtures for the following new firmware versions on existing devices: - ES20M(US)_1.0_1.0.11 - HS200(US)_3.0_1.1.5 - HS200(US)_5.0_1.0.11 - HS210(US)_2.0_1.1.5 - KP303(US)_2.0_1.0.9 - KS200M(US)_1.0_1.0.10 - KP125M(US)_1.0_1.2.3 - KS240(US)_1.0_1.0.7
2024-11-09 07:16:41 +00:00
- Hardware: 1.0 (US) / Firmware: 1.0.10
Add KS200M(US) v1.0.11 fixture (#1047)
2024-07-04 11:02:47 +00:00
- Hardware: 1.0 (US) / Firmware: 1.0.11
Add KS200M(US) fw 1.0.12 fixture (#1127)
2024-09-22 20:29:42 +00:00
- Hardware: 1.0 (US) / Firmware: 1.0.12
Add WallSwitch device type and autogenerate supported devices docs (#758)
2024-03-01 18:32:45 +00:00
- Hardware: 1.0 (US) / Firmware: 1.0.8
- **KS205**
Use markdown footnotes in supported.md (#1310) Brings our markdown inline with the [HA markdown](https://github.com/home-assistant/home-assistant.io/pull/33342#discussion_r1653484233)
2024-11-25 17:02:12 +00:00
- Hardware: 1.0 (US) / Firmware: 1.0.2[^1]
- Hardware: 1.0 (US) / Firmware: 1.1.0[^1]
Add KS220 Fixture (#1237) Add Fixture for [KS220](https://www.kasasmart.com/us/products/smart-switches/kasa-smart-wifi-light-switch-dimmer-ks220), Smart Wi-Fi Light Switch, Dimmer (HomeKit).
2024-11-09 01:50:21 +00:00
- **KS220**
- Hardware: 1.0 (US) / Firmware: 1.0.13
Add WallSwitch device type and autogenerate supported devices docs (#758)
2024-03-01 18:32:45 +00:00
- **KS220M**
- Hardware: 1.0 (US) / Firmware: 1.0.4
- **KS225**
Use markdown footnotes in supported.md (#1310) Brings our markdown inline with the [HA markdown](https://github.com/home-assistant/home-assistant.io/pull/33342#discussion_r1653484233)
2024-11-25 17:02:12 +00:00
- Hardware: 1.0 (US) / Firmware: 1.0.2[^1]
- Hardware: 1.0 (US) / Firmware: 1.1.0[^1]
Add WallSwitch device type and autogenerate supported devices docs (#758)
2024-03-01 18:32:45 +00:00
- **KS230**
- Hardware: 1.0 (US) / Firmware: 1.0.14
Support for new ks240 fan/light wall switch (#839) In order to support the ks240 which has children for the fan and light components, this PR adds those modules at the parent level and hides the children so it looks like a single device to consumers. It also decides which modules not to take from the child because the child does not support them even though it say it does. It does this for now via a fixed list, e.g. `Time`, `Firmware` etc. Also adds fixtures from two versions and corresponding tests.
2024-04-24 18:17:49 +00:00
- **KS240**
Use markdown footnotes in supported.md (#1310) Brings our markdown inline with the [HA markdown](https://github.com/home-assistant/home-assistant.io/pull/33342#discussion_r1653484233)
2024-11-25 17:02:12 +00:00
- Hardware: 1.0 (US) / Firmware: 1.0.4[^1]
- Hardware: 1.0 (US) / Firmware: 1.0.5[^1]
- Hardware: 1.0 (US) / Firmware: 1.0.7[^1]
Add WallSwitch device type and autogenerate supported devices docs (#758)
2024-03-01 18:32:45 +00:00
### Bulbs
- **KL110**
- Hardware: 1.0 (US) / Firmware: 1.8.11
- **KL120**
Add some device fixtures (#948) Adds some device fixtures by courtesy of @jimboca, thanks! This is a slightly patched and rebased version of #441. --------- Co-authored-by: JimBo <jimboca3@gmail.com> Co-authored-by: sdb9696 <steven.beth@gmail.com>
2024-06-04 17:24:53 +00:00
- Hardware: 1.0 (US) / Firmware: 1.8.11
Add WallSwitch device type and autogenerate supported devices docs (#758)
2024-03-01 18:32:45 +00:00
- Hardware: 1.0 (US) / Firmware: 1.8.6
- **KL125**
- Hardware: 1.20 (US) / Firmware: 1.0.5
- Hardware: 2.0 (US) / Firmware: 1.0.7
- Hardware: 4.0 (US) / Firmware: 1.0.5
- **KL130**
- Hardware: 1.0 (EU) / Firmware: 1.8.8
- Hardware: 1.0 (US) / Firmware: 1.8.11
- **KL135**
Add fixture for KL135(US) fw 1.0.15 (#1122) By courtesy of @jhemak: https://github.com/home-assistant/core/issues/126300#issuecomment-2364640319
2024-09-21 18:18:55 +00:00
- Hardware: 1.0 (US) / Firmware: 1.0.15
Add WallSwitch device type and autogenerate supported devices docs (#758)
2024-03-01 18:32:45 +00:00
- Hardware: 1.0 (US) / Firmware: 1.0.6
- **KL50**
- Hardware: 1.0 (US) / Firmware: 1.1.13
- **KL60**
- Hardware: 1.0 (UN) / Firmware: 1.1.4
- Hardware: 1.0 (US) / Firmware: 1.1.13
- **LB110**
- Hardware: 1.0 (US) / Firmware: 1.8.11
### Light Strips
- **KL400L5**
- Hardware: 1.0 (US) / Firmware: 1.0.5
- Hardware: 1.0 (US) / Firmware: 1.0.8
- **KL420L5**
- Hardware: 1.0 (US) / Firmware: 1.0.2
- **KL430**
- Hardware: 2.0 (UN) / Firmware: 1.0.8
- Hardware: 1.0 (US) / Firmware: 1.0.10
- Hardware: 2.0 (US) / Firmware: 1.0.11
- Hardware: 2.0 (US) / Firmware: 1.0.8
- Hardware: 2.0 (US) / Firmware: 1.0.9
Add support for KH100 hub (#847) Add SMART.KASAHUB to the map of supported devices. This also adds fixture files for KH100, KE100, and T310, and adapts affected modules and their tests accordingly. --------- Co-authored-by: Steven B <51370195+sdb9696@users.noreply.github.com>
2024-04-22 14:24:15 +00:00
### Hubs
- **KH100**
Use markdown footnotes in supported.md (#1310) Brings our markdown inline with the [HA markdown](https://github.com/home-assistant/home-assistant.io/pull/33342#discussion_r1653484233)
2024-11-25 17:02:12 +00:00
- Hardware: 1.0 (EU) / Firmware: 1.2.3[^1]
- Hardware: 1.0 (EU) / Firmware: 1.5.12[^1]
- Hardware: 1.0 (UK) / Firmware: 1.5.6[^1]
Add support for KH100 hub (#847) Add SMART.KASAHUB to the map of supported devices. This also adds fixture files for KH100, KE100, and T310, and adapts affected modules and their tests accordingly. --------- Co-authored-by: Steven B <51370195+sdb9696@users.noreply.github.com>
2024-04-22 14:24:15 +00:00
Add child devices from hubs to generated list of supported devices (#898) Updates generate_supported hook to include child devices of hubs in the list of supported devices.
2024-05-07 06:48:47 +00:00
### Hub-Connected Devices
- **KE100**
Use markdown footnotes in supported.md (#1310) Brings our markdown inline with the [HA markdown](https://github.com/home-assistant/home-assistant.io/pull/33342#discussion_r1653484233)
2024-11-25 17:02:12 +00:00
- Hardware: 1.0 (EU) / Firmware: 2.4.0[^1]
- Hardware: 1.0 (EU) / Firmware: 2.8.0[^1]
- Hardware: 1.0 (UK) / Firmware: 2.8.0[^1]
Add child devices from hubs to generated list of supported devices (#898) Updates generate_supported hook to include child devices of hubs in the list of supported devices.
2024-05-07 06:48:47 +00:00
Add WallSwitch device type and autogenerate supported devices docs (#758)
2024-03-01 18:32:45 +00:00
## Tapo devices
Add child devices from hubs to generated list of supported devices (#898) Updates generate_supported hook to include child devices of hubs in the list of supported devices.
2024-05-07 06:48:47 +00:00
All Tapo devices require authentication.<br>Hub-Connected Devices may work across TAPO/KASA branded hubs even if they don't work across the native apps.
Add WallSwitch device type and autogenerate supported devices docs (#758)
2024-03-01 18:32:45 +00:00
### Plugs
- **P100**
Use _get_device_info methods for smart and iot devs in devtools (#1265)
2024-11-18 14:53:11 +00:00
- Hardware: 1.0.0 (US) / Firmware: 1.1.3
- Hardware: 1.0.0 (US) / Firmware: 1.3.7
- Hardware: 1.0.0 (US) / Firmware: 1.4.0
Add WallSwitch device type and autogenerate supported devices docs (#758)
2024-03-01 18:32:45 +00:00
- **P110**
- Hardware: 1.0 (EU) / Firmware: 1.0.7
- Hardware: 1.0 (EU) / Firmware: 1.2.3
- Hardware: 1.0 (UK) / Firmware: 1.3.0
Add P110M(AU) fixture (#1244)
2024-11-23 12:30:39 +00:00
- **P110M**
- Hardware: 1.0 (AU) / Firmware: 1.2.3
Add P110M(EU) fixture (#1305)
2024-11-23 12:38:42 +00:00
- Hardware: 1.0 (EU) / Firmware: 1.2.3
Add P115 fixture (#950)
2024-06-04 17:18:23 +00:00
- **P115**
- Hardware: 1.0 (EU) / Firmware: 1.2.3
Add KS200 (US) IOT Fixture and P115 (US) Smart Fixture (#1355)
2024-12-10 06:14:17 +00:00
- Hardware: 1.0 (US) / Firmware: 1.1.3
Add WallSwitch device type and autogenerate supported devices docs (#758)
2024-03-01 18:32:45 +00:00
- **P125M**
- Hardware: 1.0 (US) / Firmware: 1.1.0
- **P135**
- Hardware: 1.0 (US) / Firmware: 1.0.5
Add P135 1.0 1.2.0 fixture (#1397)
2024-12-21 09:17:00 +00:00
- Hardware: 1.0 (US) / Firmware: 1.2.0
Add WallSwitch device type and autogenerate supported devices docs (#758)
2024-03-01 18:32:45 +00:00
- **TP15**
- Hardware: 1.0 (US) / Firmware: 1.0.3
### Power Strips
Add P210M(US) 1.0 1.0.3 fixture (#1399)
2024-12-21 09:20:12 +00:00
- **P210M**
- Hardware: 1.0 (US) / Firmware: 1.0.3
Add WallSwitch device type and autogenerate supported devices docs (#758)
2024-03-01 18:32:45 +00:00
- **P300**
- Hardware: 1.0 (EU) / Firmware: 1.0.13
Add fixture for p300 1.0.15 (#915) This version adds auto-off for individual strip sockets.
2024-06-10 15:00:31 +00:00
- Hardware: 1.0 (EU) / Firmware: 1.0.15
Add WallSwitch device type and autogenerate supported devices docs (#758)
2024-03-01 18:32:45 +00:00
- Hardware: 1.0 (EU) / Firmware: 1.0.7
Add P304M(UK) test fixture (#1185) P304M supports energy monitoring on child SMART devices.
2024-10-27 12:15:13 +00:00
- **P304M**
- Hardware: 1.0 (UK) / Firmware: 1.0.3
Add P306(US) 1.0 1.1.2 fixture (#1396)
2024-12-21 09:36:57 +00:00
- **P306**
- Hardware: 1.0 (US) / Firmware: 1.1.2
Add WallSwitch device type and autogenerate supported devices docs (#758)
2024-03-01 18:32:45 +00:00
- **TP25**
- Hardware: 1.0 (US) / Firmware: 1.0.2
### Wall Switches
- **S500D**
- Hardware: 1.0 (US) / Firmware: 1.0.5
- **S505**
- Hardware: 1.0 (US) / Firmware: 1.0.2
Add fixture for S505D (#947) By courtesy of @steveredden: https://github.com/python-kasa/python-kasa/issues/888#issuecomment-2145193072
2024-06-03 16:52:15 +00:00
- **S505D**
- Hardware: 1.0 (US) / Firmware: 1.1.0
Add WallSwitch device type and autogenerate supported devices docs (#758)
2024-03-01 18:32:45 +00:00
### Bulbs
- **L510B**
- Hardware: 3.0 (EU) / Firmware: 1.0.5
- **L510E**
- Hardware: 3.0 (US) / Firmware: 1.0.5
- Hardware: 3.0 (US) / Firmware: 1.1.2
- **L530E**
- Hardware: 3.0 (EU) / Firmware: 1.0.6
- Hardware: 3.0 (EU) / Firmware: 1.1.0
- Hardware: 3.0 (EU) / Firmware: 1.1.6
- Hardware: 2.0 (US) / Firmware: 1.1.0
Add L630 fixture (#1240)
2024-11-10 13:56:14 +00:00
- **L630**
- Hardware: 1.0 (EU) / Firmware: 1.1.2
Add WallSwitch device type and autogenerate supported devices docs (#758)
2024-03-01 18:32:45 +00:00
### Light Strips
- **L900-10**
- Hardware: 1.0 (EU) / Firmware: 1.0.17
- Hardware: 1.0 (US) / Firmware: 1.0.11
- **L900-5**
- Hardware: 1.0 (EU) / Firmware: 1.0.17
- Hardware: 1.0 (EU) / Firmware: 1.1.0
- **L920-5**
Add fixture for L920-5(EU) 1.0.7 (#972) When not paired, the effect is softAP: `Light effect (light_effect): invalid value 'softAP' not in ['Off', 'Aurora', ...]`
2024-06-11 18:22:32 +00:00
- Hardware: 1.0 (EU) / Firmware: 1.0.7
Add L920(EU) v1.1.3 fixture (#1031)
2024-07-02 12:36:57 +00:00
- Hardware: 1.0 (EU) / Firmware: 1.1.3
Add WallSwitch device type and autogenerate supported devices docs (#758)
2024-03-01 18:32:45 +00:00
- Hardware: 1.0 (US) / Firmware: 1.1.0
- Hardware: 1.0 (US) / Firmware: 1.1.3
- **L930-5**
- Hardware: 1.0 (US) / Firmware: 1.1.2
Add smartcamera devices to supported docs (#1257) The library now officially supports H200, C200 and TC65
2024-11-14 18:28:30 +00:00
### Cameras
Add C100 4.0 1.3.14 Fixture (#1378)
2024-12-17 10:59:24 +00:00
- **C100**
- Hardware: 4.0 / Firmware: 1.3.14
Add smartcamera devices to supported docs (#1257) The library now officially supports H200, C200 and TC65
2024-11-14 18:28:30 +00:00
- **C210**
- Hardware: 2.0 (EU) / Firmware: 1.4.2
- Hardware: 2.0 (EU) / Firmware: 1.4.3
Add C225(US) 2.0 1.0.11 fixture (#1398)
2024-12-21 09:17:50 +00:00
- **C225**
- Hardware: 2.0 (US) / Firmware: 1.0.11
Add C325WB(EU) 1.0 1.1.17 Fixture (#1379)
2024-12-18 11:43:20 +00:00
- **C325WB**
- Hardware: 1.0 (EU) / Firmware: 1.1.17
Add C520WS camera fixture (#1352) Adding the C520WS fixture file --------- Co-authored-by: Steven B <51370195+sdb9696@users.noreply.github.com>
2024-12-09 23:24:27 +00:00
- **C520WS**
- Hardware: 1.0 (US) / Firmware: 1.2.8
Add smartcamera devices to supported docs (#1257) The library now officially supports H200, C200 and TC65
2024-11-14 18:28:30 +00:00
- **TC65**
- Hardware: 1.0 / Firmware: 1.3.9
Add TC70 3.0 1.3.11 fixture (#1390) Many thanks to @allanbeth for the fixture!
2024-12-19 13:48:03 +00:00
- **TC70**
- Hardware: 3.0 / Firmware: 1.3.11
Add smartcamera devices to supported docs (#1257) The library now officially supports H200, C200 and TC65
2024-11-14 18:28:30 +00:00
Add WallSwitch device type and autogenerate supported devices docs (#758)
2024-03-01 18:32:45 +00:00
### Hubs
- **H100**
- Hardware: 1.0 (EU) / Firmware: 1.2.3
Add H100 1.5.10 and KE100 2.4.0 fixtures (#905)
2024-05-07 18:56:03 +00:00
- Hardware: 1.0 (EU) / Firmware: 1.5.10
Add WallSwitch device type and autogenerate supported devices docs (#758)
2024-03-01 18:32:45 +00:00
- Hardware: 1.0 (EU) / Firmware: 1.5.5
Add smartcamera devices to supported docs (#1257) The library now officially supports H200, C200 and TC65
2024-11-14 18:28:30 +00:00
- **H200**
- Hardware: 1.0 (EU) / Firmware: 1.3.2
- Hardware: 1.0 (US) / Firmware: 1.3.6
Add WallSwitch device type and autogenerate supported devices docs (#758)
2024-03-01 18:32:45 +00:00
Add child devices from hubs to generated list of supported devices (#898) Updates generate_supported hook to include child devices of hubs in the list of supported devices.
2024-05-07 06:48:47 +00:00
### Hub-Connected Devices
Add S200B(EU) fw 1.11.0 fixture (#1205) Adds a note about button presses not being supported.
2024-10-29 08:58:47 +00:00
- **S200B**
- Hardware: 1.0 (EU) / Firmware: 1.11.0
Add S200B(US) fw 1.12.0 fixture (#1181)
2024-10-29 09:49:49 +00:00
- Hardware: 1.0 (US) / Firmware: 1.12.0
Add S200D button fixtures (#1161) Co-authored-by: Steven B <51370195+sdb9696@users.noreply.github.com>
2024-10-29 09:37:34 +00:00
- **S200D**
- Hardware: 1.0 (EU) / Firmware: 1.11.0
- Hardware: 1.0 (EU) / Firmware: 1.12.0
Add support for T100 motion sensor (#1079) Add support for T100 motion sensor. Thanks to @DarthSonic for the fixture file!
2024-07-24 13:48:33 +00:00
- **T100**
- Hardware: 1.0 (EU) / Firmware: 1.12.0
Add support for contact sensor (T110) (#877) Initial support for T110 contact sensor & T110 fixture by courtesy of @ngaertner.
2024-05-07 18:58:18 +00:00
- **T110**
- Hardware: 1.0 (EU) / Firmware: 1.8.0
Add fixture for T110 fw 1.9.0 (#1129)
2024-09-27 08:35:17 +00:00
- Hardware: 1.0 (EU) / Firmware: 1.9.0
Add T110(US), T310(US) and T315(US) sensor fixtures (#1179) Many thanks to @SirWaddles for the fixtures!
2024-10-18 14:05:53 +00:00
- Hardware: 1.0 (US) / Firmware: 1.9.0
Add child devices from hubs to generated list of supported devices (#898) Updates generate_supported hook to include child devices of hubs in the list of supported devices.
2024-05-07 06:48:47 +00:00
- **T300**
- Hardware: 1.0 (EU) / Firmware: 1.7.0
- **T310**
- Hardware: 1.0 (EU) / Firmware: 1.5.0
Add T110(US), T310(US) and T315(US) sensor fixtures (#1179) Many thanks to @SirWaddles for the fixtures!
2024-10-18 14:05:53 +00:00
- Hardware: 1.0 (US) / Firmware: 1.5.0
Add child devices from hubs to generated list of supported devices (#898) Updates generate_supported hook to include child devices of hubs in the list of supported devices.
2024-05-07 06:48:47 +00:00
- **T315**
- Hardware: 1.0 (EU) / Firmware: 1.7.0
Add T110(US), T310(US) and T315(US) sensor fixtures (#1179) Many thanks to @SirWaddles for the fixtures!
2024-10-18 14:05:53 +00:00
- Hardware: 1.0 (US) / Firmware: 1.8.0
Add child devices from hubs to generated list of supported devices (#898) Updates generate_supported hook to include child devices of hubs in the list of supported devices.
2024-05-07 06:48:47 +00:00
Add WallSwitch device type and autogenerate supported devices docs (#758)
2024-03-01 18:32:45 +00:00
<!--SUPPORTED_END-->
Use markdown footnotes in supported.md (#1310) Brings our markdown inline with the [HA markdown](https://github.com/home-assistant/home-assistant.io/pull/33342#discussion_r1653484233)
2024-11-25 17:02:12 +00:00
[^1]: Model requires authentication
Reference in New Issue Copy Permalink